- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
www.fixya.com > ... > TM Racing > MX 125 > 2002 TM Racing MX 125 Free help, troubleshooting & support for 2002 TM Racing MX 125 tire pressure related topics. Get solutions for 2002 TM Racing MX 125 tire pressure related ...
Witch casing? Clutch casing ; Remove any levers cables lines or kicks that maybe in the way, drain oil then remove the casing bolts tap lightly with rubber hammer or block of wood to free it up and slide off.
I would only use ATF Type F (Automatic Transmission Fluid) in the TM gearbox mate. Alot of folk use light gear oil, but in my experience, it just isnt up to standard whilst ragging the nuts off the engine. All our race bikes (including our TM) use ATF, and we have had no problems.
Hi, Peter engine and transmission share the same oil many riders are over filling their oil system because they do not know how to properly read their oil site glass. The following procedure works on nearly all 4 stroke engines but to be on the safe side you should always refer to your owners manual. Use your center stand if you have one.
1. Bring the engine up to operating temperature or let idle for 5 minutes.
2. Turn off your engine and let it sit for 2 minutes, this will allow the oil from the top end to drain to the bottom.
3. Hold your bike straight up or on the center stand and wait 2 minutes for the oil in the bottom of the engine to be level in the sight glass.
4. Your oil level should be between the top full mark and the bottom add mark.
5. Never over fill your oil system it will cause problems:
a. oil leaking out of exhaust pipes.
b. oil leaking out of breather pipe/hose.
c. oil carryover into the air cleaner.
6. Your oil site glass must never be completely full drain as necessary.
7. Your oil site glass must never be completely empty add as necessary.
For more information about your question and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day. TM 250F YZ250f and WR250f Oil Change Instructions YZ WR 250f dirt bike TM Racing Manuals Spare Parts Manuals Exploded Diagrams http://www.tmracing.it/public/doc/1628_Motore_4T_250_2003.pdf TM RACING 250Fi EN Use And Maintenance Manual
Hi, Mrassembly the vast majority of service, parts, and owners manuals on the internet are "FREE" to download and all service manuals contain wiring diagrams in the back pages. The rest usually charge a modest fee around $10 sometimes more and there is a handful of obscure, rare, obsolete, and very old models that are no longer or never were available, then there is eBay where you may be able to find what you need at a very high price because of its age and rarity. Most of the "FREE" manuals will cover your exact make, model, and year otherwise one will be provided that comes as close as possible to your bike and will have most of the same info that an exact manual would have. To download your manual please click on the blue links below. Good luck and have a wonderful day. Download Moto Owners Manuals TM Racing Motorcycles TM Racing Manuals Spare Parts Manuals Exploded Diagrams TM Racing MX 250 2005 Motocross Wikipedia
The TM 125 uses 550 ml of gear oil. There is level inspection screw situated behind the rear brake lever. Access is a little tricky, but not too tough. For racing motocross I recomend ATF, but must be changed after each race day. For enduro, outriding or Sunday riders, BelRay -Trans Oil 80 W is best. You should change oil roughly every 500 km to prolong gearbox life.