Question about 2013 Yamaha Zuma 50F

1 Answer

Yamaha zuma wiring diagram

Connections to main ignition switch

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    One Above All:

    The expert with highest point at the last day of the past 12 weeks.

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

  • Yamaha Master
  • 44,778 Answers

Hi, Anonymous for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
Yamaha zuma wiring diagram Google Search
ZUMAFORUMS NET View topic 04 Zuma Ignition Wiring
http://www.49ccscoot.com/manuals/Yamaha_BWS_Zuma_50_2T_Service_Manual.pdf
OEM parts for Yamaha
http://www.yamaha-motor.com/assets/service/manuals/2008/zuma_lit-11626-21-15_1548.pdf

Posted on Nov 21, 2016

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
co7196
  • 3433 Answers

SOURCE: 1979 yamaha 750 triple ignition wires

One should be hot and a second one to the coilor a buss bar., and the third to the starter button or relay.Sound right? Good luck -ned-

Posted on Sep 13, 2009

  • 653 Answers

SOURCE: how to change ignition switch on yamaha atv

Get the electrical manual & diagram from your local library or dealers or even try to Google it or look in eBay

Posted on Mar 23, 2010

Suzman
  • 642 Answers

SOURCE: wiring diagrams for ignition switch

You can download the full service manual here:
ftp://thepit.shacknet.nu:1001/FJ1100_and_1200/FJ1100_1984_Service_Manual.rar

Posted on Sep 12, 2010

  • 11800 Answers

SOURCE: where do we get a diagram of the wiring for a 2007

From the repair manual which you can download for free from here
http://www.r6messagenet.com/forums/pdf/2007_R6_Service.pdf

Posted on Jul 14, 2011

sisadsl
  • 1508 Answers

SOURCE: ignition wiring diagram as I have faulty switch on

I think if you disconnect the entire ignition plug, it should kick start, and turn off with the kill switch.
The lights wont work,
The ignitions actually work as a kill switch in the off position

Posted on Jul 26, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2008 Yamaha Zuma shuts off after high speed but starts right up


Hi, Troy and the usual suspects are:
1. Severely discharged or a damaged battery, should have 12.5 volts or better and be able to pass a load test if necessary.
2. Failed alternator/generator and or voltage regulator.
3. Loose or corroded battery terminals and or cables especially the "NEGATIVE" cable, look for loose, corroded, or broken connectors inside the cable harness at "BOTH" ends.
4. Failed main circuit breaker or ignition switch, check for loose connections and continuity.
5. Failed system and or ignition relay, check for continuity.
6. Failed ignition coil, ignition/electronic module.
7. Failed CKP, CPS, CMP, MAP, TPS, or BAS sensor, corroded, loose or broken wire connector pins/sockets.
8. Throttle cables and or idle speed improperly adjusted hot idle speed should be 950 RPM to 1000 RPM.
9. Air/fuel mixture screw improperly adjusted.
10. Accelerator pump damaged or not working.
11. Water or dirt in the fuel system, carburetor or filter.
12. Restricted, blocked or kinked fuel line.
13. Fuel tank empty.
14. The gas cap is not venting properly or fuel tank venting system blocked.
15. Vacuum line from intake manifold to petcock broken, cracked, or not attached, carburetor vent line plugged.
16. Needle and seat stuck closed in the float bowl.
For more information about your issue and valuable "FREE" downloads that you need please click on the links below. Good luck and have a nice day.
Archived Scooter Running Questions Runs Slow Bogs Down or Is Rough
ZUMAFORUMS NET View topic ENG Yamaha Zuma 08 Throttle Mod Tutorial
http://www.scooterunderground.ca/knowledge/manuals/documents/BWS_Zuma_Service_Manual.PDF
OEM parts for Yamaha
http://www.yamaha-motor.com/assets/service/manuals/2008/zuma_lit-11626-21-15_1548.pdf

Jan 01, 2017 | 2008 Yamaha Zuma

1 Answer

Scooter wiring diagrams


Hi, Anonymous for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
2004 Yamaha Zuma Base wiring diagram Google Search
2004 Yamaha Zuma Base Specs Walkaround
http://www.49ccscoot.com/manuals/Yamaha_BWS_Zuma_50_2T_Service_Manual.pdf
OEM parts for Yamaha
http://www.yamaha-motor.com/assets/service/manuals/2008/zuma_lit-11626-21-15_1548.pdf

Jul 31, 2014 | 2004 Yamaha Zuma Base

1 Answer

Yamaha zuma wont start


Hi, Anonymous and the usual suspects are:
1. Fuel tank empty.
2. Fuel supply valve/petcock turned off.
3. Fouled spark plugs.
4. Engine flooded as a result of overuse of the enricher.
5. Vacuum hose to the fuel supply valve/petcock disconnected, broken, cracked, or pinched.
6. Fuel valve/petcock or filter clogged.
7. Fuel line to carburetor or throttle body pinched or kinked.
8. Carburetor float stuck.
9. Fuel injectors clogged.
10. Severely discharged or damaged battery, you need 12.5 volts or better and be able to pass a load test if necessary.
11. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
12. Loose or corroded wire connection at the coil, battery or plug between ignition sensor and CDI box.
Spark plug cables in bad condition and shorting check for leakage in the dark, cable connections loose, or connected to the wrong cylinders.
13. Ignition timing incorrect due to a faulty MAP, CKP, O2, TPS, sensors.
14. Faulty neutral, clutch lever, or kickstand safety switch.
15. Faulty fuel pump or fuse or relay.
16. Faulty CDI box.
17. A stuck bent or burnt valve.
18. Tip over sensor needs a reset.
19. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
ZUMAFORUMS NET View topic Help my zuma 50cc won start anymore
Scooter Troubleshooting Scooter won start All about Scooters
Yamaha Zuma YW125A Owner Manual
OEM parts for Yamaha
Yamaha YZ125T1 Owner Service Manual

Apr 24, 2014 | 2005 Yamaha Zuma

1 Answer

2011 Yamaha Zuma 125 won't start. Fuel pump is not starting so no gas. What could cause the fuel pump to not start? Only has 160 miles, but out of warranty.


Hi, Stuartsual suspects are:
1. Fuel tank empty.
2. Fuel supply valve/petcock turned off.
3. Fouled spark plugs.
4. Engine flooded as a result of overuse of the enricher.
5. Vacuum hose to the fuel supply valve/petcock disconnected, broken, cracked, or pinched.
6. Fuel valve/petcock or filter clogged.
7. Fuel line to carburetor or throttle body pinched or kinked.
8. Carburetor float stuck.
9. Fuel injectors clogged.
10. Severely discharged or damaged battery, you need 12.5 volts or better and be able to pass a load test if necessary.
11. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
12. Loose or corroded wire connection at the coil, battery or plug between ignition sensor and CDI box.
Spark plug cables in bad condition and shorting check for leakage in the dark, cable connections loose, or connected to the wrong cylinders.
13. Ignition timing incorrect due to a faulty MAP, CKP, O2, TPS, sensors.
14. Faulty neutral, clutch lever, or kickstand safety switch.
15. Faulty fuel pump or fuse or relay.
16. Faulty CDI box.
17. A stuck bent or burnt valve.
18. Tip over sensor needs a reset.
19. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
Zuma 125 Not Starting
ZUMAFORUMS NET View topic 2011 Zuma 125 will not start not fuel pump
http://z125data.weebly.com/uploads/7/1/2/2/7122816/zuma_125_service.pdf
OEM parts for Yamaha
Yamaha Zuma YW125A Owner Manual

Oct 03, 2013 | 2011 Yamaha Zuma 125

1 Answer

Yamaha zuma 150cc scooter wiring diagram


Hi, Curtis for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere zero $ you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
https://www.google.com/search?q=Yamaha+zuma+150cc+scooter+wiring+diagram&tbm=isch&tbo=u&source=univ&sa=X&ved=0ahUKEwjGnN7CpLTRAhVD6iYKHYFFCeoQsAQIGw&biw=1366&bih=638
Yamaha Motorcycle Wiring Diagrams
Yamaha YW125Y 2009 Service Manual
OEM parts for Yamaha
Yamaha 2009 YW125Y Owner Manual

Apr 05, 2013 | 2009 Yamaha Zuma

1 Answer

2005 Yamaha Zuma won't start


Hi, Anonymous and the usual suspects are:
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Discharged battery, needs to be 12.5 volts or better and be able to pass a load test if necessary.
4. Check the battery terminals for damage or corrosion check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
5. Tip over sensor needs a reset.
6. Faulty ignition switch.
7. Faulty starter button.
8. Faulty kickstand or clutch pull in switch/sensor.
9. Starter control circuit, relay, or solenoid faulty.
10. Main fuse or circuit breaker may be blown or faulty.
11. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have nice a day.
ZUMAFORUMS NET View topic Help my zuma 50cc won start anymore
Yamaha Zuma won start
Yamaha YW50P Service Manual
OEM parts for Yamaha
Yamaha ZUMA YW50T Owner Manual

Oct 26, 2012 | 2005 Yamaha Zuma

1 Answer

Yamaha zuma lights don't light up when turn the key


Hi, Tiffany if your headlight is not working, only one beam works, keeps burning out, blinking, or is dim the first thing you need to check is the headlight bulb for damaged filaments then check your light circuit fuse, then check your head light bulb socket ground wire for a clean tight connection, that being said the usual suspects are:
1. Faulty ground or power supply wire to headlight bulb socket.
2. Worn down solder contacts or loose fit of the bulb base in the socket due to vibration.
3. Worn, chaffed, or broken wires in the light circuit.
4. Corroded, broken, or loose pins/sockets in wire connectors.
5. Faulty hi/lo beam switch.
6. Faulty ignition switch.
7. Fuse is good but no continuity on both sides.
8. Faulty wiring between battery positive and headlight bulb socket.
9. Weak charging alternator/generator.
10. Faulty voltage regulator/rectifier ground or overcharging.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
ZUMAFORUMS NET View topic No electric start no rear brake lights
Archived Scooter Repair Questions Lights
http://z125data.weebly.com/uploads/7/1/2/2/7122816/zuma_125_service.pdf
OEM parts for Yamaha
Yamaha Zuma YW125A Owner Manual

Mar 22, 2012 | 2009 Yamaha Zuma 125

1 Answer

2004 yamaha zuma with no spark


Hi, Mandy and the usual suspects are:
1. Fouled spark plugs.
2. Discharged battery, needs to be 12.5 volts or better and be able to pass a "LOAD" test, your battery may show 12.5 volts but has little or zero amps and must be replaced.
3. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
4. Loose connection at ignition coil or plug between ignition sensor and module.
5. Spark plug cables in bad condition, shorting, leaking, spark plug cable connections loose check for spark leakage in the dark.
6. Faulty ignition coil or CDI or electronic control module.
7. Faulty CKP, CMP, or BAS sensor.
8. Faulty ignition switch.
9. Tilt sensor needs a reset.
10. Security alarm failing to disarm needs reset
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
ZUMAFORUMS NET View topic No spark
GY6 Electrical Troubleshooting Tutorial No Spark Eliminator
Yamaha YW50P Service Manual
OEM parts for Yamaha
Yamaha ZUMA YW50T Owner Manual

Feb 29, 2012 | 2005 Yamaha Zuma

1 Answer

1986 Yamaha Riva Jog wiring diagram


Hi, Muhabob for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
1986 Yamaha Riva Jog wiring diagram Google Search
Yamaha Motorcycle Wiring Diagrams
Yamaha CW50L Service Manual
OEM parts for Yamaha
Yamaha ZUMA CW50N Owner Manual

Jul 12, 2011 | 2006 Yamaha Jog R

Not finding what you are looking for?
2013 Yamaha Zuma 50F Logo

Related Topics:

436 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

dhnguyen

Level 2 Expert

281 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1147 Answers

Tony

Level 3 Expert

2600 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...