Question about 2001 kawasaki ZX-9 R Ninja

1 Answer

How to change front tire on 2003 zx9 - 2001 kawasaki ZX-9 R Ninja

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 434 Answers

Jack the front tire up about 12 inches. Unbolt the brake calipers. Take the axle nut off. Loosen the allen bolts on the bottom of the forks. use a small punch and tap on the center of the axle to knock it out. While tapping it out, you will need to hold the wheel up to keep pressure off the axle

Posted on Jul 08, 2009

  • Mike Phillippi Jul 08, 2009

    Jack the front tire up about 12 inches. Unbolt the brake calipers. Take the axle nut off. Loosen the allen bolts on the bottom of the forks. use a small punch and tap on the center of the axle to knock it out. While tapping it out, you will need to hold the wheel up to keep pressure off the axle

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Pass front wheel vibration 2003 Buick Lasabre with 120K onit. At 55-70 MPH. New tires on it. New bearing/hub at 95K miles.New ball joint and control arm. New tires, Rotated and Rebalanced.


when you rotate the tires and their is no change check the c/v axle -and hub 25k is not considered new have changed hubs that have gone bad at 10k -look into ball joints,upper lower bushings ,tie rod,struts the latter can cause vibration but usually at all speeds

Sep 02, 2016 | 2003 Buick LeSabre

1 Answer

What bars do i pump my zx9 tyers


read the tire sidewall. call your local service department that services your make and model. That would be a Kawasaki dealer I believe. The air pressure in motorcycle tires can go down one psi per week as cars can go down one psi per month.


Better to check with tire manufacturer for actual specs to compare to what the dealer tells you.

Sep 20, 2014 | kawasaki KAWASAKI NINJA ZX6 ZX7 ZX9 ZXR...

1 Answer

2003 accord front end shimmy and wander over 60 mph after installing 17" wheels and tires


Have the front end allighned,bigger wheels change the geometry of things

Feb 07, 2013 | 2003 Honda Accord

1 Answer

How do I raise the seat up on a 2001 kawasaki zx9 ?


If it's like my 2003 ZX9, to take the riders seat off you open the rear compartment by removing the passenger seat, the front bracket that hold the the seat has two 8mm bolts and a screw. Unscrew the screw and remove the bolts and slide or remove the bracket and then the riders seat lifts up.

Jul 23, 2010 | 2001 kawasaki ZX-9 R Ninja

1 Answer

Whining noise from front of 2003 impala.higher


Sounds like it could be the wheel bearing. Jack up the car, and see if the tire feels loose when pushing in and out at the top and bottom of the tire. That;s the most obvious way to check. But many times, the bearing is tight, but still bad.

May 13, 2010 | 2003 Chevrolet Impala

2 Answers

Left front tire shakes when applying brakes.


Exact same thing happened to me. On my 03 taurus and 03 Windstar. It ended up be worn inner tie rod ends. Would reccommend an inspection of bushings, tie rods etc.

May 11, 2009 | 2003 Ford Taurus

2 Answers

Noisey front end


Change the tire. Your tires might be worping from the inside. I had the same problem. It might need an aligment too.

Jul 16, 2008 | 2003 Mitsubishi Lancer

Not finding what you are looking for?
2001 kawasaki ZX-9 R Ninja Logo

257 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

yadayada
yadayada

Level 3 Expert

76848 Answers

bazzz7071
bazzz7071

Level 2 Expert

342 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...