Question about 2000 Bajaj Chetak 150

1 Answer

Remove indicators how to remove indicators

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Bajaj Master
  • 41,685 Answers

Hi, Anonymous for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry. If necessary transport your vehicle to the dealer or shop and have a professional technician take it for a test drive, if it is in running condition, and give you a written estimate of repairs and answer any specific questions you may have about your issue. For more information about your issue please visit the website below. Good luck and have a nice day.
Vespa Headset Cover Removal GT GTS Super 125 200 250 300
How to Remove Body Panels on GTS
http://www.carlsalter.com/download.asp?p=150
http://www.scootermasters.com/manuals/Chetak%20Service%20Manual.pdf
http://www.scootermasters.com/manuals/pdf_255.pdf

Posted on Nov 26, 2015

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2009 buick lacrosse console gear indicator bulb


Transmission Floor Shift Control Indicator Lamp Replacement

Remove the front floor console. Refer to Front Floor Console Replacement.
Rotate the floor shift control indicator lamp socket (2). Pull the socket from the trim bezel.
Remove the bulb from the socket.

Front Floor Console Replacement

Preliminary Procedures
Remove the rear floor console. Refer to Rear Floor Console Replacement.
Remove the instrument panel lower trim plate. Refer to Instrument Panel Lower Trim Plate Replacement.
Set the parking brake, then shift the transmission into drive and push the shift indicator down until it locks, to allow clearance to remove the console.
1
Front Floor Console Screw (Qty: 2)
Caution: Refer to Fastener Caution in the Preface section.
Tighten
2 N·m (18 lb in)
2
Front Floor Console Bolt (Qty: 2)
Tighten
10 N·m (88 lb in)
3
Front Floor Console Assembly
4
Front Floor Console Retainer Clip (Qty: 2)

Feb 24, 2017 | 2009 Buick LaCrosse

1 Answer

Remove indicator stalk on Vauxhall Vivaro


Remove steering wheel remove covers around switch check mounting bolts unplug switch loosen off securing bolt, lift off the column..

Nov 18, 2014 | Cars & Trucks

1 Answer

Shift indicator not working correctly


This is a common concern on explorer, shift indicator cable breaks.if you're the diy type this is a pretty easy repair. Remove steering column cover top and bottom, and instrument bezel.you'll see shifter indicator coming out of bottom of instrument cluster and cable wrapped around steering column, attached to the shifter.you'll have to remove 4 screws for cluster,7mm, tilt the bottom of the cluster and look where indicator is attached, usually 2 7 mm bolts or clips, remove and replace indicator...if the steering column was lowered without taking off indicator cable it would break cable, or could be band that wraps around column that's loose or broken..either way cheap fix..

Jun 25, 2014 | 2004 Ford Explorer

1 Answer

How removed toner indication still toshiba copier e-studio-181?


toshiba e-studio 181 toner indication patmanent still.

Feb 26, 2012 | Office Equipment & Supplies

1 Answer

1998 ford f 150 and the pointer is off


I take it you mean the gear shift indicator. under the steering column you will find a wire attached to a hook. That is attached ta black thumb wheel on a white holder. just roll the adustment till the indicator lines up in all gears. Most times though the thumb wheel holder is broken and you can not adust correctly. You will have to use a 5.5 mm socket to remove thumb wheel and Remove trim around cluster should be 3, 7mm screws and then 4, 7mm screws holding in cluster. Remove indicator by pushing back the black tabs on each side of indicator at same time and pulling down, then reverse in install indicator

May 18, 2011 | Ford F-150 Cars & Trucks

1 Answer

Plymouth grand voyager 1999 is not showing the readings on my dash for the fuel, speedometer, and has not passed emissions. What could be the problem?


Here is the procedure to check the gage connector on the back of the instrument cluster. The procedure is a lot longer if you have a mechanical PRNDL indicator in the cluster. I'm thinking you don't. You don't need to remove the cluster as the procedure says, because you're just going to check the connectors on the back. You just need to take the screws out and tilt it forward far enough to reach in and push the connectors in.


REMOVAL & INSTALLATION See Figures 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11 and 12

jturcotte_376.jpg

Fig. Fig. 1: To access the instrument cluster mounting screws, remove the lower bezel ...


jturcotte_377.jpg


Fig. Fig. 2: ... and the driver's side end cap ...



jturcotte_378.jpg


Fig. Fig. 3: ... to access the upper trim bezel screws. After removing all of the screws ...


jturcotte_379.jpg


Fig. Fig. 4: ... carefully pull the upper bezel from the instrument panel

  1. Disconnect the negative battery cable.
CAUTION The models covered by this guide are equipped with a Supplemental Restraint System (SRS), which utilizes a driver and passenger side air bag. Whenever working near any of the SRS components, such as the impact sensors, the air bag module, steering column and instrument panel, disable the SRS, as described earlier in this section.

jturcotte_381.jpg


Fig. Fig. 5: Once the bezel is removed, the instrument cluster mounting screws can be removed (two on each side)

  1. Disable the air bag system.
  2. If equipped with a mechanical transmission range indicator, perform the following;
    1. Remove the lower steering column cover.
    2. Remove the knee blocker reinforcement panel from under the steering column.
Remove the indicator cable loop.
    1. Remove the clip securing the gear shift cable end to the gear selector adapter.
    2. Pull the cable end from the gear selector.

  1. Remove the instrument cluster bezel.
  2. Remove the mounting screws securing the instrument cluster to the instrument panel.
  3. Rotate the top of the cluster outward.
  4. Disengage the wiring harness connectors from behind the cluster assembly.
  5. Remove the instrument cluster from the vehicle. If equipped with a mechanical transmission range indicator, carefully guide the range indicator cable and guide tube through the opening to avoid any possible damage.

jturcotte_382.jpg


Fig. Fig. 6: After the mounting serews are removed, reach behind the cluster and unplug the electrical connectors ...





jturcotte_1400.gif

Fig. Fig. 8: Instrument cluster mounting detail (models with a mechanical transmission range indicator)



jturcotte_1401.gif

Fig. Fig. 9: Range indicator cable mounting detail
To install:

  1. If equipped with a mechanical transmission range indicator, verify the free travel of the range indicator cable from P to 1 by gently pulling on the cable, then relaxing the cable. Do NOT snap the cable once it is pulled.
  2. Position the instrument cluster assembly into the instrument panel by leading the bottom of the cluster in first, plug in the wiring harness connector(s), and rotate upward. If equipped with a mechanical transmission range indicator, route the indicator cable and guide tube through the opening in the instrument panel.


jturcotte_383.jpg

Fig. Fig. 10: On models with a mechanical transmission range indicator, the cable must be accessed by removing the lower steering column cover. Remove the mounting fasteners, and lower the cover ...


jturcotte_385.jpg


Fig. Fig. 11: ... disconnect the parking brake cable ...


jturcotte_386.jpg


Fig. Fig. 12: and remove the reinforcement

  1. Install and tighten the instrument cluster mounting screws.
  2. Install the instrument cluster bezel.
  3. If equipped with a mechanical transmission range indicator, install the indicator cable and guide tube. Install the cable retaining clips.
  4. Install the knee blocker reinforcement panel.
  5. Install the lower steering column cover.
  6. Connect the negative battery cable.

Apr 01, 2011 | Plymouth Voyager Cars & Trucks

1 Answer

I am using dell inspiron laptop with the following spec 320 GB hard disc 3 GB ram 2.4 GHz speed my laptop works well even the charge is good but ...


has ever been opened?

-remove the AC power.
-remove the Battery
-remove the Hinge Cover
-remove the Keyboard
-left down the"keyboard" you will find a flat cable to be connected to the motherboard.


good luck!

Mar 07, 2011 | Dell InspironTM 1501 Notebook

1 Answer

How to change a wheel speed sensor on a 2002 chevy silverado


Removal & Installation
Front
To Remove:


  1. Raise and safely support the vehicle.
  2. Remove the wheel assembly.
  3. Remove the brake rotor.
  4. Remove the Wheel Speed Sensor (WSS) cable clip from the knuckle.






    chevy_aval15_02-04_speedsensorharness.gif



  5. Remove the WSS cable clip from the upper control arm.
  6. Remove the WSS cable clip from the frame.
  7. Remove the WSS cable electrical connector.
  8. Remove the WSS mounting bolt.
    CAUTION
    Carefully remove the sensor by pulling it
    straight out of the bore. DO NOT use a screwdriver, or other device to pry the
    sensor out of the bore. Prying will cause the sensor body to break off in the
    bore.

  9. Remove the WSS from the hub/bearing assembly.

To Install:


  1. Seal the WSS bore to prevent dirt or debris from falling into the hub.
  2. Clean the mounting surface on the hub to remove any rust or corrosion.
  3. Apply wheel bearing lubricant, GM P/N 01051344 or equivalent to the hub
    surface and the sensor O-ring to ease sensor installation.
  4. Install the WSS into the hub/bearing assembly.
  5. WSS sensor must be seated flat against the hub.
  6. Install the WSS mounting bolt.

    • Tighten to 13 ft lbs (18 Nm).

  7. Install the WSS cable mounting clips.
  8. Connect the WSS cable electrical connector.
  9. Install the brake rotor.
  10. Install the wheel and tire assembly.
  11. Perform a low speed test for proper operation:

    • Start the engine and allow it to idle.
    • Verify the ABS indicator or the traction assist indicator remains
      illuminated.
    • If the ABS indicator or the traction assist indicator remains illuminated,
      DO NOT proceed to drive the vehicle until it is diagnosed and repaired. Check
      the wheel speed sensor electrical connector to ensure it is not damaged and is
      installed properly. If the lamp remains illuminated, diagnostics are required.
    • Select a smooth, dry, clean, and level road or large lot that is as free of
      traffic and obstacles as possible.
    • Drive the vehicle and maintain a speed of at least 16 km/h (10 mph) for at
      least 5 seconds.
    • Stop the vehicle and check to see if the ABS indicator or the traction
      assist indicator is illuminated.
    • If an indicator is illuminated, diagnostics are required.

Rear
The powertrain control module (PCM) uses the transmission mounted vehicle
speed sensor (VSS) for rear wheel speed input signals. The PCM then sends this
information to the EBCM to use for ABS control.


prev.gif next.gif

Oct 07, 2010 | 2002 Chevrolet Silverado 1500

1 Answer

How to remove "Message Sending" indication


go to outbox n delete all entries in it. clea sent items folder. then switch off, remove the battery once. now switch on . it must be alright

Sep 04, 2009 | Nokia 3110 Cellular Phone

1 Answer

Front indicators


Removing the indicators is a simple process involving the removal of the fairing to unclip and unplug them from the fairing. The plastic press studs that hold sections of the fairing in place are prone to breaking when you remove them but are easily obtained from your local Yamaha dealer and inexpensive.

Jun 21, 2009 | 2008 Yamaha YZF-R6

Not finding what you are looking for?
2000 Bajaj Chetak 150 Logo

Related Topics:

87 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bajaj Experts

sachin sharma
sachin sharma

Level 2 Expert

171 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4521 Answers

chandrakantm

Level 1 Expert

8 Answers

Are you a Bajaj Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...