Question about 2007 Honda CRF 150 R
Posted by Anonymous on
Hi, Anonymous and the usual suspects are:
1. Fouled spark plugs.
2. Severely discharged or a damaged battery should have 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a preliminary reading of 12.5 volts or more but little or zero amperage the battery is faulty and must be replaced, AGM batteries fail in this scenario more so than lead acid batteries.
3. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
4. Loose connection at ignition coil or plug between ignition sensor and module.
5. Spark plug cables in bad condition, shorting/leaking, spark plug cable connections loose check for spark leakage in the dark.
6. Faulty ignition coil or electronic control module.
7. Faulty pulse coil.
8. Faulty CKP, CMP, or BAS sensor.
9. Faulty ignition switch.
10. Tilt sensor needs a reset.
11. Security alarm failing to disarm needs reset
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
2007 CRF 150 No spark won start
How to fix No Spark Problem on Motorcycles and Dirt Bikes
CRF150R service manual repair 2007 2014 CRF150RB Download Manuals Technical $10
Honda CRF150F Owner Manual
Posted on Aug 07, 2017
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: how do i take the
fairly easy first remove throttle cable it unscrews like a coke bottle at the top of the carbureator. then remove fuel lines be sure to mark them if there are more than one next remove clamps that hold air intake onto carbureator. it may be stiff so be careful not to crack it by forcing it. finally unbolt carbureator from engine should be two bolts one on each side. hope this helps
Posted on Feb 22, 2011
Tips for a great answer:
Jun 11, 2017 | 2007 Honda CRF 150 F
Apr 22, 2016 | 2007 Honda CRF 230 F
Apr 16, 2016 | 2006 Honda CRF 150 F
Aug 24, 2013 | 2007 Honda CRF 150 F
Mar 16, 2013 | 2007 Honda CRF 150 F
Feb 27, 2013 | 2007 Honda CRF 150 F
Jan 22, 2012 | 2007 Honda CRF 150 F
Nov 16, 2008 | 2004 Honda CRF 150 F
35 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: