Question about Aprilia SL Mille Falco Motorcycles
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Assuming the carbs were rebuilt properly, this sounds to me like a carb float being stuck open. Turn off the gas and drain the offending carb. Next, turn the gas back on and sharply tap the float bowl with the plastic handle of a screwdriver as the fuel bowl refills. The goal here is to vibrate the float to free it up. If doing this process a couple of times does not free the float I would remove the carb and look at the float chamber fo any problems such as stuck float, float level not set correctly, and the correct installation of the main jet.
Use an air hose to dry out the cylinder then install a new spark plug AFTER you make sure that the cylinder is getting spark. Be sure to balance and sync the carbs when finished.
Please rate this solution.
Posted on Mar 18, 2009
Let me get ths straight, there is petrol leaking out of your bike, more or less between your legs and you are still riding it??? STOP, if you have no concern for yourself, consider othrs around you. Dont ride this motorcycle until you find and repair the problem. I would suspect a vent or fuel line but it could be the carb over flow or a hole in the tank. Please get it fixed before you ride again.
Posted on Dec 12, 2012
Tips for a great answer:
Jul 04, 2015 | Land Rover Freelander Cars & Trucks
Nov 10, 2013 | Motorcycles
Dec 12, 2012 | 2007 Gilera SC 125
Nov 25, 2010 | Suzuki AX 100 Motorcycles
Mar 13, 2010 | 2003 Yamaha Road Star Silverado
Aug 29, 2009 | 1994 kawasaki ZZR 400
Jan 18, 2009 | 2000 Honda NSR 125
16 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: