Question about 2004 Yamaha YZF-R6

1 Answer

I am bypassing my ignition on my 2004 r6 and the fuel pump and display turn on but it wont turn over

Neutral light doesn't come on

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    One Above All:

    The expert with highest point at the last day of the past 12 weeks.

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

  • Yamaha Master
  • 48,614 Answers

Hi, Anonymous and the usual suspects are:
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Discharged battery, needs to be 12.5 volts or better and be able to pass a load test if necessary.
4. Check the battery terminals for damage or corrosion check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
5. Tip over sensor needs a reset.
6. Faulty ignition switch.
7. Faulty starter button.
8. Faulty kickstand or clutch pull in switch/sensor.
9. Starter control circuit, relay, or solenoid faulty.
10. Main fuse or circuit breaker may be blown or faulty.
11. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have nice a day.
http://www.r6-forum.com/forums/46-general-discussions/165925-r6 wont-turn-over.html
http://www.r6messagenet.com/forums/welcome-center/161248-please-help-bike-wont-start-turn-over.html
2003 2004 Yamaha YZF R6 Service Manual R6 Moto Data Project
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-yz-owners-manuals

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Posted on Sep 06, 2016

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
Benimur
  • 6966 Answers

SOURCE: ignition wont turn off

Hi and welcome to FixYa,

Offhand, it would appear that some of the contacts of the main (ignition) switch has fused together. To check, with the ignition switch off and key removed, all wires from the ignition switch must have no 12 volts reading except for the red.

Good luck and thank you for asking FixYa.

Posted on Jun 28, 2009

  • 1 Answer

SOURCE: 2005 yamaha r6 want start. New plugs,replaced all

my yamaha r6 will not start all im getting is clicking

Posted on May 08, 2010

nedkelly900
  • 345 Answers

SOURCE: My 1999 r6 speedo is resetting ,tach is

first, check you battery terminals, make sure they are clean and tight.

Posted on May 18, 2010

  • 827 Answers

SOURCE: 2008 yamaha r6 wont start i put in a new ignition now my fuel pump wont ingage and my neutral light wont come on for some reason my bike will not start or turn over what is wrong and how do i fix

Good Morning,. I found this for you.. worth a shot:

  • verify that the main fuse is not blown. It would be inside the starter relay. To locate the starter relay, follow the cable from the battery's + terminal;
  • if the battery and the main fuse checks good, then check the voltage on the red wire from the starter relay to the ignition switch;
  • do the same and check for the presence of +12 to the brown wire from the ignition switch to the CDI.
  • Best regards
  • Ck

Posted on Nov 02, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2004 Yamaha YZF-R6 will not start


Hi, Jose and the usual suspects are:
1. Fuel tank empty.
2. The fuel tank has old dead gas.
3. Fuel tank bottom contaminated with ethanol sludge, dirt, water, rust, etc.
4. Fuel supply valve/petcock turned off.
5. Fouled spark plugs.
6. Engine flooded as a result of overuse of the choke.
7. Vacuum hose to the fuel supply valve/petcock disconnected, broken, cracked, or pinched.
8. Fuel valve/petcock or filter clogged.
9. Fuel line to carburetor or throttle body pinched, kinked or blocked.
10. Carburetor float stuck.
11. Fuel injectors clogged.
12. Fuel injectors stuck open.
13. Severely discharged or a damaged battery should have 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a cursory reading of 12.5 volts or more but little or zero amperage the battery is faulty and must be replaced, AGM batteries fail in this scenario more so than lead-acid batteries.
14. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
15. Loose or corroded wire connection at the coil or plug between ignition sensor and ECM module.
16. Spark plug cables in bad condition and shorting check for spark leakage in the dark, cable connections loose, or connected to the wrong cylinders.
17. Ignition timing incorrect due to a faulty ignition coil, ignition module or MAP, CMP, CKP, O2, TPS, ETP, IAC sensors.
18. Faulty neutral, clutch, kickstand safety switch.
19. Faulty fuel pump or fuse or relay.
20. A stuck bent or burnt valve.
21. Tilt sensor needs a reset.
22. Security system not disarming alarm needs a reset.
23. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
http://www.r6messagenet.com/forums/r6-maintenance-technical/26969-bike-turning-over-but-not-starting.html
03 R6 wont start
Yamaha YZF R6 Service Manual
https://www.partsfish.com/page/oem-parts-for-yamaha
Yamaha YZF R6 Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Oct 30, 2017 | 2004 Yamaha YZF-R6

1 Answer

When i go to start my 2004 Alero all the gauge lights come on but it won't start. The starter is still good. What could the problem be? Someone suggested that it was the neutral safety switch.


look for security light when you turn on key if it lights and doesn't go off leave key on for ten minutes then turn key off and then try to start

Oct 16, 2012 | 2003 Oldsmobile Alero

2 Answers

Symptoms for a faulty neutral safety switch


No start (engine doesn't crank with starter motor) in neutral and park position, one or both

Oct 16, 2012 | Cars & Trucks

1 Answer

1988 Trans Am will not start when ignition is turned all the way.


Take a test light to the small wire on the starter and have someone turn it to the start position. If the light lights up and the engine doesn't turn over, I would suspect the starter itself. If the test light doesn't light, try it in neutral and repeat test. If it still doesn't light up, it may be the PRNDL switch or the ignition switch itself.

Sep 22, 2012 | 1988 Pontiac Firebird

1 Answer

Nuetral light wont come on , wont start


Hi, Mlboasko for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
neutral light wont come on when in neutral and wont start with kick stand...
http://www.r6-forum.com/forums/57-garage-mechanical-help/133145-07-r6-no-neutral-light-wont-start.html
2003 2004 Yamaha YZF R6 Service Manual R6 Moto Data Project
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-yz-owners-manuals

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Jul 31, 2012 | 2004 Yamaha YZF-R6

1 Answer

My yamaha r6 neutral light wont work and when i try to strat the engine wont start


Hi, Hilario for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
http://www.r6-forum.com/forums/57-garage-mechanical-help/133145-07-r6-no-neutral-light-wont-start.html
neutral light wont come on when in neutral and wont start with kick stand...
2007 Yamaha YZF R6 Service Manual R6 Moto Data Project
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-yz-owners-manuals

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Apr 07, 2012 | 2007 Yamaha YZF-R6

1 Answer

My yamaha r6 wont turn the neutral light on and when i try to start the engine wont start eather


Hi, Anonymous for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
http://mybikemanuals.com/yamaha/yamaha-yz-owners-manuals
OEM parts for Yamaha
2007 Yamaha YZF R6 Service Manual R6 Moto Data Project
neutral light wont come on when in neutral and wont start with kick stand...
http://www.r6-forum.com/forums/57-garage-mechanical-help/133145-07-r6-no-neutral-light-wont-start.html

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Apr 07, 2012 | 2007 Yamaha YZF-R6

1 Answer

The parking light estay in reverse ,when is on parking and dont start the engine


Your shift indicator is out of alignment or your shift linkage is out of adjustment. If you have the shift lever all the way up and are sure it has locked into park try shifting to Neutral and see if you can start it in neutral. If it starts this is a simple adjustment. if it doesn't you will need to replace the neutral safety switch or have the TCM repaired at a transmission shop.

Nov 19, 2011 | 2000 Chevrolet Silverado

Not finding what you are looking for?
2004 Yamaha YZF-R6 Logo

43 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

Tom

Level 2 Expert

314 Answers

vince

Level 3 Expert

1216 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1165 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...