Question about 2007 Triumph Tiger 1050 ABS

Open Question

How do I replace the headlight bulbs on a trimph tiger 1050

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 164 Answers

SOURCE: my tiger 1050 wont start, plenty of power in

I would first fill the tank with fresh fuel especialy if the bike has stood for any length of time also determine as to wether or not fuel is actualy reaching the barrrels remove the spark plugs & check if they are wet or dry if they are found to be dry open the drain plugs on the carby float bowls if fuel runs out of the drain it must be asumed that your broblemis carburation & will require the carbies to be removed stripped & cleaned this will involve the removal of all the jets the float & the needle & seat once these have all bean cleaned thoroughly [compressed air is usefull for this part of the operation] &reasembled return them to the machine &

Posted on Feb 20, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi triumph tiger1050 2007 .can only get 4@5 gear but some times all gears come back.thanks Dave.


Hi, David for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry. If necessary, transport your bike to the dealer or shop and have a professional technician take it for a test drive, if it is in running condition, and give you a written estimate of repairs and answer any specific questions you may have about your problem. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have nice a day.
http://www.triumphrat.net/speed-triple-forum/90392-4th-to-5th-gear-false-neutral.html
http://www.triumphrat.net/tiger-workshop-archive/143719-tiger-1050-gearbox-problems.html
http://wemakeitsafer.com/vehicle-recall/Triumph-Tiger-1050-Recall-9446166
http://www.electrosport.com/technical-resources/known-issues/common-tech-issue?model=2516
Triumph TROPHE Service Manual Page 2

Jul 04, 2016 | 2007 Triumph Tiger 1050 ABS

1 Answer

Can you tell me what the colour code is for triumph tiger 1050 blazing orange


Try your local NAPA... or maybe a phone call to the local triumph dealership.

Mar 10, 2015 | 2008 Triumph Tiger

1 Answer

Can a connection be made to run both headlight at same time


You can get a relay to do that. Sold on Ebay..
http://www.ebay.co.uk/itm/TRIUMPH-SPRINT-TIGER-955i-SPEED-4-TWIN-HEADLIGHT-RELAYS-/180813682079?pt=UK_Motorcycle_Parts_13&hash=item2a1955d59f

Nov 12, 2013 | 2006 Triumph Tiger

1 Answer

How to replace headlamp bulbs on Triumph Tiger 955(2006)


Remove the screen 4 plastic bolts,

Remove the indicator mounts, 3 screws, 1 is to inside of the tank on either side of the headstock. you can let them dangle on the wiring if so desired.

Remove the bolts under the screen and the bolts under the indicator mounts , hex bits required.

Remove the fairing from the bike.

3 allan bolts, 1 ether side and one underneath support the headlight assembly. Once these are slackened you will have access to the rear of the lights.

Reassembly is the reverse, allow 45 mins to an hour to complete the job,

Apr 19, 2010 | 2004 Triumph Tiger

1 Answer

Need to replace headlight bulb 2007 hhr


H13 HALOGEN HEADLIGHT BULB, SOLD INDIVIDUALLY -- Low 55/high 65-watt halogen bulb; 12.8 volts; P26.4t base; A high quality, direct fit OE replacement headlight bulb

3c8c3dc.jpg


How to Replace a Headlight Bulb
(DIY Complexity: Easy / Time: 0.9 hour)

Parts:
1. Headlight Bulb

Tools:
1. Screwdriver
2. 1/4 in. Drive Ratchet
3. Socket Set

Steps:
Step 1 Open the hood and locate the headlight assembly.
o Tip: Most headlight assemblies have a place in the rear to gain access to the headlight bulb.
o Tip: It is recommended that headlight bulbs are replaced in pairs.
o Tip: Always make sure the struts on the hood can fully support the weight of the hood so that it does not close on you while working. The use of a hood prop can securely hold it in place.
o Tip: Safety Tip:Always wear safety glasses when working on your vehicle. Wear other personal protective equipment (PPE) when necessary, for example latex gloves or safety shoes.

Step 2 Gain access to headlight bulb.
o Tip: It is a good idea to check the high beam and low beam headlight bulbs at this time.

Step 3 Disconnect the wiring harness and replace the old headlight bulb with a new one.

Step 4 Turn on the headlights and check high and low beams to verify repairs.

Hope this help (remember rated this help). Good luck.

Mar 30, 2010 | 2008 Chevrolet Hhr

1 Answer

My tiger 1050 wont start, plenty of power in


I would first fill the tank with fresh fuel especialy if the bike has stood for any length of time also determine as to wether or not fuel is actualy reaching the barrrels remove the spark plugs & check if they are wet or dry if they are found to be dry open the drain plugs on the carby float bowls if fuel runs out of the drain it must be asumed that your broblemis carburation & will require the carbies to be removed stripped & cleaned this will involve the removal of all the jets the float & the needle & seat once these have all bean cleaned thoroughly [compressed air is usefull for this part of the operation] &reasembled return them to the machine &

Feb 20, 2010 | 2007 Triumph Tiger

1 Answer

Torque setting


The sprocket nut torque setting is 132Nm. If you are after the plastic cover torque settings, i dont think they have one. Hope this helps.

Mar 28, 2009 | 2007 Triumph Tiger

1 Answer

Can I go off road?


I think that the new 1050 is not as convidence inspiring as the older models, but I found it very stable when on wider forest service type roads. The rims are cast, so much more easily bent. My 1050 felt great as I would stand on the pegs and use my body more. Would slide it out to the side a few times, intentially, and did not feel out of control either.

Nov 10, 2008 | 2008 Triumph Tiger

Not finding what you are looking for?
2007 Triumph Tiger 1050 ABS Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Triumph Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Triumph Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...