Question about Yamaha V Star Classic Motorcycles

1 Answer

650 v star wont start battery good no green light

Posted by Anonymous on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Yamaha Master
  • 39,939 Answers

Hi, Anonymous and the usual suspects are:
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Discharged battery, needs to be 12.5 volts or better and be able to pass a load test if necessary, check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
4. Bank angle sensor tripped and ignition/light key switch not cycled to the "OFF" position and then back to the "ON" position.
5. Faulty starter button/switch.
6. Faulty kickstand or clutch pull in switch/sensor.
7. Security alarm needs a reset.
8. Starter control circuit, relay, or solenoid faulty.
9. Main fuse or circuit breaker may be blown or faulty.
10. Electric starter shaft pinion gear is not engaging or over-running starter clutch slipping.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have nice a day.
VStar 650 won start
Help My Star 650 Wont Start
98 00 Yamaha XV650 Star Service Manual XVS650 Moto Data Project
OEM parts for Yamaha
http://www.starmotorcycles.com/assets/service/manuals/2003/LIT-11626-16-05_22.pdf

Posted on Jun 01, 2016

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Benimur
  • 6966 Answers

SOURCE: My bike wont start up, fuzes are good, oil good,

Hi and welcome to FixYa,

Initially, determine if there is a clicking sound when the START button is pressed. The click is significant. If there is, this indicates that the starting relay is engaging but for some reason, the starter motor is not cranking. This could either indicate a faulty starter relay (particularly the contacts) or a faulty starter motor (specifically, the carbon brushes). To determine which:

  • with the side covers off, expose the starter relay particularly the 2 large terminals;
  • have somebody start the bike normally using the key and button start switch;
  • determine if indeed the clicking is coming from the starter relay;
  • while the start button is still pressed, jump the 2 big terminals;
  • if the engine cranks, then the internal contacts of the starter relay are corroded or burned;
  • if the engine will not crank, then the starter motor is faulty.
If there is no click, you may want to check the alarm/security/immobilizer if your bike is so equipped. others to check would be side stand switch, clutch switch and neutral light indicator.

Good luck and thank you for using FixYa.

Posted on Feb 22, 2009

DickCanFixIt
  • 948 Answers

SOURCE: my 650 v-star wont start cylinode is clicking

Your battery is too low. Take out the battery and have it tested.

Posted on Mar 06, 2009

  • 1 Answer

SOURCE: 2007 650 v-star turns over but does not start

substitute of three legs ic number 7812 in yamaha psr2000 keyboard

Posted on Dec 12, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 v star custom i accidentaly grounded out my battery while jumping it off now my fuel pump does'nt come on an my push button start does;nt work. but all my lights and my horn works and have a relay...


Hi, Anonymous and the usual suspects are:
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Discharged battery, needs to be 12.5 volts or better and be able to pass a load test if necessary, check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
4. Bank angle sensor tripped and ignition/light key switch not cycled to the "OFF" position and then back to the "ON" position.
5. Faulty starter button/switch.
6. Faulty kickstand or clutch pull in switch/sensor.
7. Security alarm needs a reset.
8. Starter control circuit, relay, or solenoid faulty.
9. Main fuse or circuit breaker may be blown or faulty.
10. Electric starter shaft pinion gear is not engaging or over-running starter clutch slipping.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have nice a day.
VStar 650 won start
Help My Star 650 Wont Start
http://www.sloneservices.com/SilverBack/Other-Stuff/V-StarShopManual99-07.pdf
OEM parts for Yamaha
https://dd5394a0b8ca8e97ba29-abf76f3d91a2125517d6c7c409f095c7.ssl.cf1.rackcdn.com/content/common/manuals/1999/LIT-11626-12-30_126.pdf

Apr 26, 2014 | 2000 Yamaha V Star Custom

1 Answer

2006 yamaha v star 650 carburetor choke wont move


Hi, Anonymous for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
Cleaning Star 650 Carburetors
http://www.starbikeforums.com/forums/18-engine-work/35745-losing-my-mind-carb-starting-issue-v-star-650-a.html
98 00 Yamaha XV650 Star Service Manual XVS650 Moto Data Project
OEM parts for Yamaha
http://www.starmotorcycles.com/assets/service/manuals/2003/LIT-11626-16-05_22.pdf

Jan 10, 2014 | 2006 Yamaha V Star Classic

1 Answer

I also checked all the fuses we could find. 6 fuses on the right side of the bike. All are good.


Hi, Rbest and the usual suspects are:
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Discharged battery, needs to be 12.5 volts or better and be able to pass a load test if necessary, check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
4. Bank angle sensor tripped and ignition/light key switch not cycled to the "OFF" position and then back to the "ON" position.
5. Faulty starter button/switch.
6. Faulty kickstand or clutch pull in switch/sensor.
7. Security alarm needs a reset.
8. Starter control circuit, relay, or solenoid faulty.
9. Main fuse or circuit breaker may be blown or faulty.
10. Electric starter shaft pinion gear is not engaging or over-running starter clutch slipping.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have nice a day.
VStar 650 won start
Help My Star 650 Wont Start
98 00 Yamaha XV650 Star Service Manual XVS650 Moto Data Project
OEM parts for Yamaha
http://www.starmotorcycles.com/assets/service/manuals/2003/LIT-11626-16-05_22.pdf

Oct 18, 2013 | 2003 Yamaha V Star Classic

1 Answer

Yamaha 650 v star classic won't start


Hi, Anonymous and the usual suspects are:
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Discharged battery, needs to be 12.5 volts or better and be able to pass a load test if necessary, check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
4. Bank angle sensor tripped and ignition/light key switch not cycled to the "OFF" position and then back to the "ON" position.
5. Faulty starter button/switch.
6. Faulty kickstand or clutch pull in switch/sensor.
7. Security alarm needs a reset.
8. Starter control circuit, relay, or solenoid faulty.
9. Main fuse or circuit breaker may be blown or faulty.
10. Electric starter shaft pinion gear is not engaging or over-running starter clutch slipping.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have nice a day.
Help My Star 650 Wont Start
V650 won start in 650 Star Tech Forum
98 00 Yamaha XV650 Star Service Manual XVS650 Moto Data Project
OEM parts for Yamaha
http://www.starmotorcycles.com/assets/service/manuals/2003/LIT-11626-16-05_22.pdf

Sep 28, 2013 | 2004 Yamaha V Star Classic

1 Answer

V star 650 new battery but no power


Take a look at the start solenoid ...

Mar 21, 2013 | Yamaha Motorcycles

1 Answer

2006 Yamaha 650 V star wont start


what is your battery voltage? check for loose batter terminals and ground cables. Charge the battery if its low and then see if it will start. once its running test the voltage again. It should put out 13.5-15 volts just off idle. if it doesnt, something is wrong with your charging system.

Mar 14, 2012 | Yamaha Motorcycles

1 Answer

My v-star 650 will not start ,the battery is charged i have checked all fuses and wiring but when i turn the key to start nothing happens.


Hi, Madmike76 and the usual suspects are:
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Discharged battery, needs to be 12.5 volts or better and be able to pass a load test if necessary, check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
4. Bank angle sensor tripped and ignition/light key switch not cycled to the "OFF" position and then back to the "ON" position.
5. Faulty starter button/switch.
6. Faulty kickstand or clutch pull in switch/sensor.
7. Security alarm needs a reset.
8. Starter control circuit, relay, or solenoid faulty.
9. Main fuse or circuit breaker may be blown or faulty.
10. Electric starter shaft pinion gear is not engaging or over-running starter clutch slipping.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have nice a day.
VStar 650 won start
V650 won start in 650 Star Tech Forum
http://www.sloneservices.com/SilverBack/Other-Stuff/V-StarShopManual99-07.pdf
OEM parts for Yamaha
http://www.starmotorcycles.com/assets/service/manuals/2003/LIT-11626-16-05_22.pdf

Apr 08, 2010 | 2000 Yamaha V Star Classic

1 Answer

650 classic v star NO POWER TO STARTER ?....


Hi and welcome to FixYa,

For a good number of brand/models/versions of bikes including the Yamaha VStar 650, please click here.

Good luck and thank you for using FixYa.

Apr 14, 2009 | 2001 Yamaha V Star Classic

2 Answers

My 650 v-star wont start cylinode is clicking


Your battery is too low. Take out the battery and have it tested.

Mar 06, 2009 | 2004 Yamaha V Star Classic

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

dhnguyen

Level 2 Expert

281 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1144 Answers

Tony

Level 3 Expert

2600 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...