Question about Motorcycles

1 Answer

I have a 2004 Kawasaki Vulcan 2000 and I'm not getting power to the fuel pump checked fuses and they are ok please help

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    New Friend:

    An expert that has 1 follower.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

  • Expert
  • 109 Answers

You need to check your resistance from the fuse to the pump and make sure there isn't a break In the line

Posted on Apr 16, 2014

  • 3 more comments 
  • Abby Babson
    Abby Babson Apr 17, 2014

    Yes I traced it all the way to the black box under the battery what is the box

  • Joey Bain Apr 17, 2014

    Relay/control module

  • Abby Babson
    Abby Babson Apr 17, 2014

    Is there a way to bypass it and check it out and thanks for your help by the way

  • Joey Bain Apr 17, 2014

    I would recommend pulling the fuel pump out of your tank before testing it. You would then take the two leads and a meter and check your continuity

  • Abby Babson
    Abby Babson Apr 17, 2014

    Thanks

×

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Benimur
  • 6966 Answers

SOURCE: fuel pump won't power up on 94 rf600r

Hi and welcome to FixYa,

On most Suzukis with fuel pump that I have worked on, the wiring would be:

  • Yellow/Green - start interlock, connected to the clutch lever position switch and/or starter control relay;
  • Black/White - ground;
  • Orange/Yellow - ignition B+12; and
  • Black/Yellow - trigger pulse, connected to the - terminal of one of the ignition coils and/or to the CDI/igniter.
Just a start, do postback how things turned up or should you need additional information. Good luck and Thank you for using FixYa.

Posted on Nov 28, 2008

  • 22 Answers

SOURCE: fuel pump not priming

check the cdi in suzuki when goes bad some times the pump does not work.

Posted on Feb 24, 2009

zr800o1le
  • 19 Answers

SOURCE: Where can I find the Fuse Panel om a 2002 Kawasaki

I found the Manual telling me where it was Located.

Posted on May 12, 2009

shadtremonky
  • 353 Answers

SOURCE: kawasaki vulcan 750 1986 cannot source fuel tap

check vacuum lines to fuel switch

Posted on Jul 01, 2009

  • 19 Answers

SOURCE: 2004 Kawasaki vulcan 800 classic speedometer cable

Is the actual cable square? There should be a square hole that has to line up with your square cable. Slide the square cable into the square hole, then just screw the nut back on.

Posted on Aug 03, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Oil in air breather Vulcan 2000 2004 Model


Hi, Greg love that name and the usual suspects are:
1. Oil tank over filled always check your oil level with the engine at normal operating temperature, then try running it halfway between the low and full marks or if you have no dipstick 8 ounces less than recommended or a 1-inch air pocket in the oil tank.
2. Clogged, pinched, bent, or loose breather line/pipe. If your lines run into the air filter try routing them into a tee fitting and then a single line that goes towards the ground into a mini filter that is secured by a zip tie to a lower frame rail.
3. The piston rings are worn passed specifications which can be confirmed by a proper leak down test "OR" the rings were never properly seated during the initial break-in procedure and need to be replaced, this is caused by being too gentle on a new engine. Proper break-in procedures are in your owners manual.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
humungus oil leak from air filter cover
Vulcan 2000 Oil in Air Cleaner
Kawasaki VULCAN 2000 Service Manual
OEM Parts for Kawasaki
2004 Kawasaki Vulcan 2000 Owner Manual

Jun 09, 2017 | 2004 kawasaki Vulcan 2000

1 Answer

2003 Kawasaki Vulcan only signal lights work


Hi, Garry you may have a faulty ignition switch get out your test light and start tracking the lack power to your lights for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Kawasaki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
2003 Kawasaki Vulcan wiring diagram Google Search
Kawasaki Motorcycle Wiring Diagrams
KAWASAKI VN800 Service Manual
OEM Parts for Kawasaki
2003 Kawasaki Vulcan 800 Owner Manual

Apr 20, 2017 | 2003 kawasaki VN 800 Vulcan Classic

1 Answer

What could make my 2003 Kawasaki mean streak shut off at 2000 rpm


Hi, Donald and the usual suspects are:
1. Severely discharged or a damaged battery should have 12.5 volts or better and be able to pass a proper "LOAD" test if necessary your battery may show 12.5 volts or more but have little or zero amps and must be replaced.
2. Failed alternator/generator and or voltage regulator.
3. Loose or corroded battery terminals and or cables especially the "NEGATIVE" cable, look for loose, corroded, or broken connectors inside the cable harness at "BOTH" ends.
4. Failed main circuit breaker or ignition switch, check for loose connections and continuity.
5. Failed system and or ignition relay, check for continuity.
6. Failed ignition coil, ignition/electronic module.
7. Failed CKP, CPS, CMP, MAP, TPS, or BAS sensor, corroded, loose or broken wire connector pins/sockets.
8. Throttle cables and or idle speed improperly adjusted hot idle speed should be 950 RPM to 1000 RPM.
9. Fuel tank empty.
10. Fuel tank contaminated with ethanol sludge.
11. Water or dirt in the fuel system, or clogged filter.
12. Restricted, blocked or kinked fuel line.
13. Faulty fuel pump.
14. Faulty pressure regulator.
15. Faulty or clogged fuel injectors.
For more information about your issue and valuable "FREE" downloads that you need please click on the blue links below. Good luck and have a wonderful day.
03 1600 Classic hesitates now turning off
Mean Streak Power surging around 2000 rpm
Kawasaki VN1500 MEAN STREAK Service Manual
OEM Parts for Kawasaki
http://mybikemanuals.com/kawasaki/kawasaki-vulcan-owners-manuals

Apr 15, 2017 | 2003 kawasaki VN 1500 Vulcan Meanstreak

1 Answer

Does the 1996 Vulcan 1500 classic have a fuel pump relay @nd if so location please?


Hi, Gorillazoe yes it does for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Kawasaki, despair not, for a mere zero $ you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
1996 Kawasaki Vulcan 1500 fuel pump relay location Google Search
http://tearitupfixitrepeat.blogspot.com/2010/08/if-your-1500-vulcan-wont-start.html
http://diagramas.diagramasde.com/otros/Kawasaki%20VN1500%2087-99%20Service%20Manual%20ENG%20By%20Mosue.pdf
OEM Parts for Kawasaki
Download Manual 1996 Kawasaki Vulcan 1500 Classic Owner Manual

Dec 24, 2016 | 1996 kawasaki VN 1500 Vulcan Classic

1 Answer

2006 kawasaki vn2000-a1 vulcan 2000 wont start like no fuel but pump is priming


Hi, C-mo' and the usual suspects are:
1. Fuel tank empty.
2. Fuel supply valve/petcock turned off.
3. Fouled spark plugs.
4. Engine flooded as a result of overuse of the enricher.
5. Vacuum hose to the fuel supply valve/petcock disconnected, broken, cracked, or pinched.
6. Fuel valve/petcock or filter clogged.
7. Severely discharged or damaged battery, you need 12.5 volts or better and be able to pass a load test if necessary.
8. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
9. Loose or corroded wire connection at the coil, battery or plug between ignition sensor and module.
10.. Spark plug cables in bad condition and shorting, cable connections loose, or connected to the wrong cylinders.
11. Ignition timing incorrect due to a faulty ignition coil, ignition module or sensors (MAP, CMP, CKP, O2, TPS, ETP, IAC,or BAS).
12. Faulty neutral, clutch lever, or kickstand safety switch.
13. Faulty fuel pump fuse or relay.
14. Security alarm needs a reset.
For more information about your issue and valuable "FREE" downloads that you will need please click on the websites below. Good luck and have a nice day.
charged battery now bike won start
wont start
http://www.kawasakimotorcycle.org/forum/kawasaki-cruisers/95808-05-kawasaki-1500-vulcan-classic-wont-start.html
http://www2.vulcanrider.se/DL/2004_VN2000_Service.pdf

Apr 07, 2016 | kawasaki Motorcycles

1 Answer

Im trying to find out where to connect a 1992 kawasaki vulcan 400 fuel line from the tank to carburetor


Didn't know they made a Vulcan 400.

BUT, if you meant a Vulcan 500, maybe this'll help:

http://www.bikebandit.com/houseofmotorcycles/1992-kawasaki-vulcan-500-en500a-fuel-evaporative-system/o/m150088sch55170

Oct 26, 2013 | 2004 kawasaki VN 800 Vulcan Classic

1 Answer

2003 kawasaki 1500 fi nomad - No battery power to bike. Battery charged, no lights or displays, main fuse and and fuses in fuse box OK.


Ok, locate and check the fuse at the starter solenoide, this is the main power fuse, follow the red battery lead until you locate the solenoide, here you should find under a cover a 30 amp fuse, hope this helps , paul

Feb 27, 2011 | 2003 kawasaki VN 1500 Vulcan Classic...

1 Answer

THE BATTERY I CHARGED BUT I GET NO POWER TO LIGHTS OR STARTER WHEN I TURN ON THE KEY, NO ELECTRIC FUEL PUMP HUM, NO NEUTRAL LIGHT ETC....


It sounds like the main fuse is blown, have you tried checking the fuses, I have seen them blow when the battery gets to low and it when you try to start it with a low battery is causes excessive draw and usually pops the fuse.

Apr 20, 2010 | 2000 kawasaki VN 800 Vulcan Drifter

1 Answer

Crank fuse on 2005 vulcan classic


keep pressing the starter and find out were the click is comeing from,, then change the starter solenoid, it sounds like this is at fault

Mar 02, 2010 | 2004 kawasaki VN 1500 Vulcan Classic

1 Answer

Ignition Fuse keeps blowing


From another forum,

"You've got an exposed hot wire somewhere in the power circuit that's grounding out and causing resistance in the wire. Not sure how to help on this one, electrical problems are damn near invisible, but I'd start looking for a burn mark or scorched insulation on any of the wiring leading up the relay, starter, or main fuze block in the tail."

Apr 28, 2009 | 2000 kawasaki VN 1500 Vulcan Classic...

Not finding what you are looking for?

Open Questions:

Motorcycles Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motorcycles Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75817 Answers

kakima

Level 3 Expert

102366 Answers

Are you a Motorcycle Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...