Question about 2005 Cagiva Raptor 125

1 Answer

How to remove gear box seal

My regal raptor 300 is leaking oil from gearbox how do you replace seal on gearbox

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    One Above All:

    The expert with highest point at the last day of the past 12 weeks.

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

  • Cagiva Master
  • 49,480 Answers

Hi, Andrea sorry you can't find the first and best tool you ever bought for your Cagiva despair not for a mere $0 you can download another one. For more information about your issue and free downloads that you will need please visit the websites below. Good luck and have a nice day.
CAGIVA MITO 125
Gear shift oil seal Aprilia RS125
Free Cagiva Motorcycle Service Manuals for download
http://www.oemmotorparts.com/oem2.asp?M=Cagiva
http://www.cagiva.nl/media/owner_manuals/?tx_motomondo_pi4%5Bmodel%5D=&tx_motomondo_pi4%5Byear%5D=-1&tx_motomondo_pi4%5Bmanual%5D=

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Posted on Jan 22, 2016

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
Doktir
  • 55 Answers

SOURCE: water leak/mixing with oil

The gasket on the gear shaft is dead. Water runs around it between the outer cover and the gearbox, and unfortunately the gear shaft needs to go all the way through them to get to the 'box. There should be a flat O-shaped gasket around the shaft, and that's leaking water into the oil, and out the side. This is a pretty tough job if you havn't got the right tools, so maybe rather take it to a workshop mate! Hope that helps!

Posted on Mar 10, 2009

tundrajet
  • 80 Answers

SOURCE: kx250 gearbox/drianplug leaking

There is pressure in the crankcase when the engine is running and when you rev it up this pressure increases. Oil pressure inceases with RPM and yes the oil will get frothy under pressure.

If you suspect the drain plug is leaking then remove the plug and wrap the threads with teflon tape and reinstall the plug, this should prevent the plug from leaking.

Posted on Jun 07, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Verso gearbox leaking oil


There is a seal in the gearbox and this has been damaged so oil is leaking past it out of the gearbox. You will have to carefully replace this seal, to do this you need to take the gearbox out of the car, put it on a bench and carefully remove the old seal and press in a new one.

Dec 20, 2013 | 2006 Toyota Corolla

1 Answer

Leaking oil between the gear box and engine


Leaking rear main seal.
Remove the gearbox and clutch, inspect clutch, pressure plate and throw out bearing for wear and replace if necessary, remove flywheel.
Now that you've gained access to the rear main seal, remove it carefully with a hook or screwdriver, some are bolted in (don't score chip or mark the crank) inspect the crank for a wear grove. If a groove is evident and more than 5 or 6 thou deep, get the crank repaired or speedy sleeve it yourself, re-fit new rear main seal, re assemble, bleed clutch if it's hydraulic and no more leak.

Sep 05, 2013 | Cars & Trucks

1 Answer

Skoda gear selector assembly manual gearbox 1998 felicia please show design and possible solution to oil leak from gear box end


Normally there is a seal of sorts here (it may be a felt seal or a rubber flap) but I find that if there is a problem here I check firstly the oil level in the gear box and the viscosity of the oil in the box Remove the filler plug (plug in the side of the box ) and drain until oil is level with the bottom of the threads. Best replace oil with a known viscosity oil for you gear box.

Apr 01, 2013 | Skoda Cars & Trucks

1 Answer

2003 passat 130bhp tdi auto. oil leaking fromtork converter the car recently had a gearbox oil and filter change and drove perfectley but when i put it into reverse and drove it for about 50 meters all...


Hi Craig,
I'd suggest that the oil seal which seals between the torque converter neck and the gear box casing is damaged and will need replacing. The job seems simple but in fact can result in breaking the gearbox oil pump, when the torque converter is refitted to the gear box. the neck has to align with the gears inside the gear box and the oil pump, if the torque converter is not fitted correctly the damage I've mentioned will take place when refitting box.
If you would like to proceed let me know.
Regards Johngee10

Mar 02, 2011 | 2004 Volkswagen Passat

1 Answer

I have a leak coming from inside the bell housing of my transaxle leaking onto my clutch making it slip new clutch replaced less than a week ago and rear main seal replaced oil smells like gear oil (rotten...


There is an oil seal on the gearbox/transaxle input shaft. If this has failed it will leak oil on to the clutch.It might be able to be replaced by just removing the gearbox again to access the seal. Most likely though is, the gearbox will need to be opened up to replace it.

Oct 12, 2010 | 1998 Suzuki Swift

3 Answers

Is the gear box on an old Woods Bush Hog packed in grease or a heavy weight gear oil and what type is best. How do you prevent leaking


90 weight only. Fill through top until level with side opening. If it is leaking, it has likely blown it's seals. If leak is slow, just keep checking and filling it. If it's just flowing out, it's best to replace the box. No too fun. I've had to do it twice in about 15 years. Hope this helps a little:)

Aug 19, 2010 | RTO 1:1.2 Mower Gearbox Brush Hog Rotary...

1 Answer

Oil leak from driveshaft n/s


not sure if you can interchange the manual & aut shafts, but you should check to see if there is excessive play where the shaft enters the gear box if so the diff bearings my be worn, if there is no play or noises from gear box when driving, remove the shaft again an try the seal on the shaft to check it's a proper fit, before fitting seals it is a good idea to leave them soaking in oil for a few hours prior to fitting

hope this helps

Regards

Jim

May 29, 2010 | Hyundai Motor S Cars & Trucks

2 Answers

My K45SS is leaking some kind of oil or grease from the part of the mixer above where the mixer part attaches. It otherwise seems to be functioning fine.


its gear oil from the gear box that the motor turns to make the beaters turn,you need to replace the seals or keep adding food grade oil before you dry out the gearbox and ruin it

Mar 09, 2010 | KitchenAid K45SS Classic Stand Mixer

1 Answer

How to fix oil leak from top of a manual gearbox housing


sorry but its going to be a big job. you need to remove the gearbox to open up and get to the seals. you could try and use an additive in the gear box, its like oil seal for engine you can get it for engines gear boxes and difs and power steering. it sometimes goes by seek and seal, in older vehicles its quite good. you will need to replace the oil it will need to be done twice to clean it all out so it can get a good seal.. i.e change oil run engine get the gearbox to move for 20 min then change the oil as its warm not hot so let it cool down for 10-20 min then drain. put the seek and seal in and top up with oil and run as normal, check after a few days to see if its worked. usual does.

Jun 12, 2017 | 1995 Ford Ranger Supercab

1 Answer

Micra gear box Cv joint relacement


this easy, drain oil from gear box remove that drive shaft (u need a ball joint splitter)
replace gearbox seal, pry out old 1 with screw driver, gently tap new in, oil edge of new seal 1st. replace oil, ps dont leave to long as will damage gearbox when lack of oil

Aug 09, 2009 | 1994 Nissan Sentra 4-Door

Not finding what you are looking for?
2005 Cagiva Raptor 125 Logo

Related Topics:

241 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cagiva Experts

Marvin
Marvin

Level 3 Expert

81423 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

5065 Answers

bazzz7071
bazzz7071

Level 2 Expert

342 Answers

Are you a Cagiva Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...