Question about 2007 Suzuki Boulevard S40
Posted by Anonymous on
Tips for a great answer:
on Jul 09, 2009 | Universal Kreepy Krauly In-Ground Pool...
Aug 12, 2014 | Harley Davidson FLHTCUI Electra Glide...
Aug 26, 2013 | 1993-1999 Honda Cb900rr Motorcycle Clutch...
Aug 13, 2011 | Universal Kreepy Krauly In-Ground Pool...
The best way to install the foot pad is to the install the flat part of the cassette to feed the foot pad into the grove (as you turn it). It always always works best when warm, so if the foot pad has been out side and it is cold, then it will need to warm up.
When the foot pad finishes, the flat part will be towards the back and the rounded part towards the front of the cleaner.
INSTRUCTIONS FOR REPLACING THE FOOT PAD
Unthread and remove the cassette. Holding the Baracuda G3, press
down on the yellow clip while pulling the foot flange toward you. Pull off the
old footpad and stretch on the new one. Insert the locking clip of the foot
flange into the large opening, push forward to lock into place insert the
cassette and tighten.
If you need any additional information, please do no hesitate to ask! We all work hard here at Fix Ya and appreciate your feedback as well.
The Ugly Pool Guy
Dec 14, 2010 | Zodiac Baracuda G4 Automatic Pool Cleaner...
Dec 13, 2009 | 2005 Harley Davidson FLHTCUI Electra Glide...
Oct 18, 2012 | 2007 Suzuki Boulevard S40
12 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: