Question about 2001 Suzuki FXR 150

2 Answers

THE YELLOW LIGHT IN THE LCD DISPLAY ON MY FXR150 IF OFF FOR COUPLE OF WEEKS....SHOULD I CHANGE THE BATTERY?????

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

It has nothing to do with the battery. The two light bulbs that illuminate the display panel from the inside have to be replaced.

Do not attempt to unscrew the panel face. Those "screws" are fake! Instead, remove the front fairing to gain access to the back of the display panel. You will see two black rubber covers on the two ends of the back. Pull out the covers. This exposes the bulb. Twist it out and check if they are bad. Your moto shop should have them in stock. They are common bulbs. Put everything back on your bike and you should have light again. Good luck.

Penguin

Posted on Jun 25, 2010

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 88 Answers

Do what the handbook tells u yo do when these lights come on. They indicate a problem of a failure which will/ could damage the bike

Posted on Apr 19, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My battery light has been coming on and off for a couple of weeks now and saying "Service Battery Charging System".


Have your charging system tested. The battery light is turned on when there is a charging system problem causing an over/under charge condition. You may possibly have an alternator problem. If the battery is not being charged properly, the computer will start shutting down electrical components for protection and to keep enough voltage supply to enable the vehicle to continue running

Jan 27, 2016 | Cars & Trucks

1 Answer

I have fluke 789, now there is no display only at the left side have 3 led light on ,


you can try replacing lcd, if that does not fix problem then send it in for service

Feb 12, 2014 | Science & Laboratory

1 Answer

After recording with a full new battery (and the old one) the power just shuts off after about 15 min. Why?


The camcorder will shut off (i.e. go into "sleep" mode) after a few minutes of inactivity - to save your battery, particularly when your battery is at half or lower.
I find that my (fully charged) battery lasts only about 30 minutes (or less, if I use the zoom a lot, or, I use the filming (night) light, or I do not put the lens cover on when not in use, or I do not close the LCD display screen). I'll usually power off after completing my shots.
I keep a close watch on the battery meter and switch batteries as soon as it shows a red bar. (Just give it a minute to wrap-up before shutting down). I usually carry a couple of extra charged batteries. A larger (after market) battery that I bought lasted a hour or so, but it didn't hold a charge well after a couple of weeks of use.

Jun 10, 2010 | Samsung SC-DC173 DVD Camcorder

1 Answer

Display has light, no picture


It may be any one of them, Best bet is if you are on apple protection plan or any other insurance they will fix it for you for free.
Regards

Jul 21, 2009 | Apple 15" PowerBook G4 Aluminum 1.67 GHz...

2 Answers

Blank screen on Nokia 6085


Frist U Change LCD Second Change Display Strip Third Change LCD IC  In Last Flash Phone.

Apr 09, 2009 | Nokia 6085 Cellular Phone

1 Answer

The camera wont turn on


hi...ensure that the camera is turned on. If applicable, ensure the lens cover has been removed before taking pictures. the LCD backlight is turned on by pressing the DISPLAY button several times until the screen appears. Depending on the camera model, the DISPLAY button may be labeled as DISP or with a display icon. This button could be a standalone button or it depends upon the camera model.....
If operating the camera with a battery, ensure the battery is fully charged.
Ensure the battery is inserted properly in the camera.
If operating the camera with the power adapter, ensure it is plugged into a working AC outlet.
Ensure no Audio/Video (A/V) cables are connected for viewing pictures on a TV; the LCD screen will not display when an A/V cable is connected.
Perform a reset procedure on the camera....

Apr 04, 2009 | Kodak EasyShare C743 Digital Camera

2 Answers

ViewSonic LCD (VA1912w) Went Blank


ViewSonic LCD (VA1912w) Went Blank

I am using this great LCD for about an year. But few times in the past my LCD didnt show up the display though the Green light was still ON, turning off the LCD and opening it again always solved the problem. But now My LCD completely went blank. Turning off/on didnt work at all now. I've tried couple of other tweaks mentioned on this site but they didnt work. I am just seeing a blank screen with green light ON. and ya theres a very low hissing sound coming from the LCD.

Feb 18, 2009 | ViewSonic VA1912w 19" LCD Monitor

1 Answer

Problem with display


It's the inverter you need to change.
Usually that's the symtoms when it goes.
You can usually find one on ebay or amazon or wherever it's not very hard to change either.
Just has a couple of plugs and they are affordable.

Dec 23, 2008 | Toshiba Satellite A85-S107 Notebook

1 Answer

LCD monitor goes blank


It appears that the display resolution set in your display properties is out of the range that the LCD can display.

Try this.

Boot to the ENABLE VGA MODE by pressing F8 to get the Windows Boot Menu. If you can get to the desktop, then go to display properties, and see if you can change the resolution to higher settings and maintain video. (If the video blanks out, then it should revert to the previous setting in 15 seconds)

Aug 03, 2008 | Gateway FPD2275W LCD Monitor

Not finding what you are looking for?
2001 Suzuki FXR 150 Logo

141 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

Richard
Richard

Level 2 Expert

83 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...