The drain plug is a hose that comes down to a sprung clamp on the frame behind the gear box on the right side of your bike. Remove from clamp then undo the screw-ring round the hose to allow the plug in the hose to be removed, take lid off oil tank and turn engine over a coupla times to clear engine oil into drainage tank. Replace plug- etc before refilling with half the oil, turn engine over coupla times then add remaining top up oil. Drainage for your primary oil is at the rear inside near the gasket joint and can be removed with a Hex spanner, taking the large outside cover off your primary with star drive sockets to allow airflow for drainage and then to pour new oil in through after replacing drainage plug in the bottom. Buy a Manual Mate, its worth it eh considering the value of your bike?
1,148 views
Usually answered in minutes!
×