Question about 2011 Suzuki Van Van 125

1 Answer

Suzuki vanvan 2004, what size hex for front wheel spindle and where do I buy it ?

What size is the hex wrench for the front wheel spindle, where do I buy it and where can I get a manual for the 2004 model. Thanks

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

Not sure about the size of the axle nut, but you can get service manuals on Amazon or eBay (Haynes or Chiltons), or a pdf download from servicemanualrepairs.com.

Posted on May 16, 2014

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 3567 Answers

SOURCE: suzuki dr 125

Don't worry about the metric size. Just call a Suzuki parts department and tell them Year and Model of your bike and see if they have a nut in stock. The nut is what is called a "castle nut". There should be a cotter pin inserted through the castle and through the drill hole in the axle then spread around the nut. This keeps the nut from coming loose.

I believe the part number for the nut is 09159-12027
The cotter pin number is 04111-25308

Please rate this solution. Thanks! :)

Posted on May 21, 2009

bazzz7071
  • 338 Answers

SOURCE: What size front rim and tire do i need to replace

Call the dealer they will happily give the answers and prices

Posted on Jul 07, 2010

  • 1 Answer

SOURCE: My 2004 Suzuki Marauder is leaking red fluid on

I'm having a similar issue with my 2003 Marauder. I now believe it's coming from the fork suspension. The red fluid is inconsistent with the color of brake fluid. The brake fluid in my bike is tan in color where as the leaking fluid is red in color.

I also do not believe it is any other fluid since the leak is only at the front wheel. Thus, it can not be transmission fluid, oil, radiator coolant or anything else. I'll reply to this posting when I completely resolve the issue

Posted on Sep 13, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Need hex wrench for intex control unit


if bought new the multi tool is included if used any hardware/or store selling tools carries the hex key

Jun 11, 2017 | Cars & Trucks

1 Answer

What is the axle nut size on a 2000 and a 2004 Pontiac sunfire are they the same?


Spindle Nut:
Thread: M20-1.5; Hex Size: 30mm; Height: 19mm

2000 and 2004 are the same size.

Nov 04, 2016 | Pontiac Sunfire Cars & Trucks

1 Answer

I have a Ryobi WS730 wet saw. I suppose the manual was discarded by my wife with the box. I need to change the blade and do not find a stopping mechanism to hold the blade while I use a wrench on the...


The saw should have come with a wheel wrench and a hex key. The hex key will act as your stopping mechanism if you hold it.

With the saw unplugged, loosen the wheel guard lock and rotate the wheel guard to expose the arbor nut. Put the wrench on the arbor nut and a hex key in the spindle. Keep the wheel from turning with the hex key and loosen the arbor nut with the wrench (turn counter-clockwise). Then remove the hex key, wheel wrench, arbor nut, and outer washer to access the blade. Remove the old blade then wipe a drop of oil on the inner washer. Place the new blade on the spindle. Replace the outer washer and then the arbor nut. Again use the wheel wrench and the hex key to tighten the arbor nut while keeping the wheel from turning. Then replace the wheel guard and tighten the wheel guard lock.

The manual is available from Ryobi: http://www.ryobitools.com/catalog/power_tools/tile_saws/WS730 . The direct link to the manual is http://www.ryobitools.com/product_manual/file_url/11/WS730_414_eng.pdf .

I hope this helps.

Cindy Wells
(If you can't find the hex key, get another that will just fit the opening in the spindle.)

Jul 05, 2011 | Garden

2 Answers

How to remove the front wheel on the 90 model zxr 750.


To do this safely and securely you will need to obtain a front paddock stand which supports your front wheel, you will then need a "24mm hex drive socket" to loosen the wheel, pull the spindle out and wheel shoul slide out easily.

Oct 07, 2010 | 1990 kawasaki ZXR 750

1 Answer

How do you lock spindle on Delta Osillating sander to change sand rolls?


The spindle screw is reverse tread and you need to turn it clockwise to loosen and counter clockwise to tighten the screw. You can usually hold the spindle with your hand then turn the screw clockwise to loosen the screw. Worst case scenario, carefully turn the machine upside down. Place it on a clean supporting surface. Use a flat-head screwdriver or similar device to remove the plastic gear cover to gain access to socket-head screw. Carefully place the machine on its side. Attach the spindle adapter to the motor shaft turning the spindle adapter counter-clockwise on the shaft.
NOTE: Motor shaft has a left-hand thread.
Place a 7/16" open-end wrench on the flats of spindle adapter. Insert a 3/16" hex
wrench into the socket-head screw located where the plastic gear cover was removed.
Hold the hex wrench to prevent the motor shaft from turning. Turn the wrench counter -clock wise to
fasten the spindle adapter on the motor shaft.
Reinstall the plastic gear cover that was removed above.

Jul 10, 2010 | Garden

1 Answer

What wrench is needed to remove the 2002 GTI lug nuts?


they are the locking wheel nuts(lugs)and you will need a key(not a hex allen key)to remove them.if you look close you will see that the sides are not equal.
I use a nut spilitter or an old socket hammered onto the nut to remove it,means replacements but next time you buy a car check to make sure you have the radio code and the wheel nut key.

May 29, 2010 | 2002 Volkswagen GTI

1 Answer

How do I remove spindle nut on a 1997 suzuki sidekick


on some models they are put on with a impact wrench i used to just put a impact wrench on it put it on remove and pull the trigger

Mar 27, 2009 | 1997 Suzuki Sidekick

1 Answer

Can't Get Blade Off


without a model number I cant look at a breakdown but if it is like the table saws that I work on I would assume that you removed the center plate to get to the hex nut and spindle, if so what I have to sometimes is put my wrench on the spindle and brace it against the saw frame and using a soft mallet tap on the hex wrench to loosen the nut. After this initial blade change the hex nut has to be tight but not to the point of breaking wrenches. If this doesn't work get me the model number and I will dig deeper to try and help

Jan 01, 2009 | Skil 10" Table Saw

Not finding what you are looking for?
2011 Suzuki Van Van 125 Logo

124 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4521 Answers

Richard
Richard

Level 2 Expert

83 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...