Question about 2001 Suzuki VZ 800 Marauder
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
the bike should be straight up and down and the oli level should be in the middle of the glass you bike should take around 4 qts
Posted on May 15, 2009
My 2007 C90t which is the same motor as yours requires 4 1/2 quarts of 10/40wt.
Stick with Suzuki brand oil btw. When I changed to Amsoil, I developed a problem.
Posted on Sep 11, 2009
• Place the front fork vertically without spring.
• Compress it fully.
• Pour specified front fork oil up to the top level of the outer
Capacity (each leg): 490 ml (16.6/17.3 US/lmp oz)
99000-99044-L01: SUZUKI FORK OIL L01
or an equivalent fork oil
• Move the inner rod slowly with the special tool ten times and
more until no more bubbles come out from the oil.
09940-52841: Inner rod holder
Refill front fork oil up to the top of the outer tube so that bubbles
are visible while bleeding air.
• Refill specified front fork oil up to the top level of the outer
tube again. Move the outer tube up and down several strokes
until no more bubbles come out from the oil.
• Keep the front fork vertically and wait 5 – 6 minutes.
* Always keep oil level over the cartridge top end, or air may
enter the cartridge during this procedure.
* Take extreme care so as to pump out air completely.
• Hold the front fork vertically and adjust fork oil level with the
When adjusting the fork oil level, compress the outer tube fully
without the fork spring.
Fork oil level: 153 mm (6.02 in)
09943-74111: Front fork oil level gauge
Posted on Dec 20, 2009
you can loosen the tank at the back by undoing the two bolts that double as seat brackets, once youve done that you can lift it up enough to gain access but it will slip off backwards if you undo the gas tap and release the breather pipe under the tank aswell, the tank is held in place by two rubber bungs at the front that slip into two locating grooves on the tank,, slip off backwards and slips back on forwards,,you wil need long reach sparkplug sockets,, and when putting them back in finger tight them first to make sure youve got em in right
Posted on Jan 03, 2010
Tips for a great answer:
Jun 19, 2015 | 2003 Suzuki VZ 800 Marauder
Jan 20, 2013 | 2003 Suzuki VZ 800 Marauder
Jul 15, 2011 | 1999 Suzuki VZ 800 Marauder
Jul 13, 2011 | 2004 Suzuki VZ 1600 Marauder
Aug 26, 2010 | 1999 Suzuki VZ 800 Marauder
Aug 10, 2010 | 2000 Suzuki VZ 800 Marauder
Oct 04, 2009 | 1999 Suzuki VZ 800 Marauder
Jul 25, 2009 | 1998 Suzuki VZ 800 Marauder
May 15, 2009 | 2001 Suzuki VZ 800 Marauder
39 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: