Question about 2001 Honda CBR 929 RR Fireblade

1 Answer

2001 Honda CBR 929 RR Fireblade fault codes

Warning light flashing on the dash on my CBR 929rr,3 long flashes, and 4 quick flashes, keeps on repeating it self

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    One Above All:

    The expert with highest point at the last day of the past 12 weeks.

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

  • Honda Master
  • 48,599 Answers

Hi, Anonymous for this scenario you will need your service, parts fiche, and owners manual if you can't find the best tool you ever bought for your Honda, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
http://www.fireblades.org/forums/honda-fireblade/63940-cbr-929rr-several-problems-fi-light.html
Honda Motorcycles Fault Codes Motorcycle Manuals PDF
http://www.cyclechaos.com/images/9/97/Honda_CBR929RR_Service_Manual.pdf
http://www.partsfish.com/page/oem-parts-for-honda
Honda CB Owners Manuals

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Posted on Aug 08, 2017

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
karan4aaki
  • 68 Answers

SOURCE: Second Gear is out on

heyii there is a shaft coming ut of the engine crank that connects to your transmission shaft which drives your gears and hence wheels.. so your 2nd gear must have worn out and for that reason the gear isn't working well.. get your gear box opened and check the gear.. Belated Merry X-mas and Happy New Year [:)]

Posted on Dec 27, 2008

  • 22 Answers

SOURCE: honda fireblade slips out of 2nd &3rd gear at 7500rpm,8000rpm

need to re do the trany

Posted on Feb 25, 2009

wayneman01
  • 301 Answers

SOURCE: having trouble with my honda 2001 cbr

There are several possible causes; fuel mixture is too rich, air filter is clogged, or worn piston rings and/or valve guide seals. The latter, however, will most likely produce blue smoke - under acceleration means worn rings, blue smoke under deceleration means bad valve guide seals. Also make sure that the crankcase vent is not obstructed as this will tend to force oil up, past the rings and into the combustion process.

Generally, an examination of the spark plugs will give you a good clue as to what the offender is. Black, sooty spark plugs indicates too much fuel (clogged air filter or mixture too rich). Oily spark plugs means worn engine parts, as mentioned above.

Posted on Oct 27, 2009

  • 653 Answers

SOURCE: what motor oil is recommended for 2001 honda cbr

Any oil with SAE 10/40W for late model bikes (check Castrol, or Benray website). When changing oil recommended to change oil filter every other oil change.

Posted on Mar 28, 2010

  • 921 Answers

SOURCE: red light on dash next to neutral on and a number

do you mean "FI" fuel injection, i think thats what you mean. you should take it to the dealer so they can pull up the codes on the computer.
Or you first try s can of Sea Foam Fuel treatment from Autozone $10, pour in 1/3 can to 2 gallons fuel and ride the bike for about 10 to 15 miles..the injectors might just be dirty.

Posted on May 05, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2002 f150 cruise inop shows code 3?


  • 3 flashes - deactivator switch is open or circuit defective.
    • Flash code 3 - deactivator switch circuit failure
    • Central junction box (CJB) fuse 13 (20A).
    • Circuitry.
    • Deactivator switch.
    • Speed control servo.
    • Go To Pinpoint Test H .
    PINPOINT TEST H: FLASH CODE 3 - DEACTIVATOR SWITCH CIRCUIT FAILURE
  • CONDITIONS DETAILS/RESULTS/ACTIONS H1 CHECK THE DEACTIVATOR SWITCH CIRCUITRY
    Speed Control Servo C122
    Measure the voltage between the speed control servo C122 pin 9, circuit 307 (BK/YE), harness side and the speed control servo C122 pin 10, circuit 57 (BK), harness side.
    • Is the voltage greater than 10 volts?
    Yes INSTALL a new speed control servo. REFER to Speed Control Servo in this section. REPEAT the self-test.

    No GO to H2 . H2 CHECK DEACTIVATOR SWITCH POWER
    Deactivator Switch C1025
    Measure the voltage between the deactivator switch C1025, circuit 10 (LG/RD), harness side and ground.
    • Is the voltage greater than 10 volts?
    Yes GO to H3 .

    No REPAIR the circuit. REPEAT the self-test. H3 CHECK CIRCUIT 307 (BK/YE) FOR AN OPEN Measure the resistance between the speed control servo C122 pin 9, circuit 307 (BK/YE), harness side and the deactivator switch C1025, circuit 307 (BK/YE), harness side.
    • Is the resistance less than 5 ohms?
    Yes INSTALL a new deactivator switch. REFER to Speed Control Deactivator Switch in this section. REPEAT the self-test.

    No REPAIR the circuit. REPEAT the self-test.

Nov 23, 2016 | 2002 Ford F-150

1 Answer

2001 Honda CBR 929 RR Fireblade fault codes


Hi, Anonymous for this scenario you will need your service, parts fiche, and owners manual if you can't find the best tool you ever bought for your Honda, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need for viewing and printing please click on the blue links below. Good luck and have a wonderful day.
Honda Motorcycles Fault Codes Motorcycle Manuals PDF
929rr error codes
http://www.cyclechaos.com/images/9/97/Honda_CBR929RR_Service_Manual.pdf
http://www.partsfish.com/page/oem-parts-for-honda
Honda CB Owners Manuals

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


Jun 26, 2014 | 2001 Honda CBR 929 RR Fireblade

1 Answer

2001 Honda CBR 929 RR Fireblade fault code 35 34


Hi, Anonymous for this scenario you will need your service, parts fiche, and owners manual if you can't find the best tool you ever bought for your Honda, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
My CBR 929rr FI light is flashing code 34 CBR Forum Enthusiast forums for...
http://www.fireblades.org/forums/honda-fireblade/4229-error-code-35-a.html
Honda Motorcycles Fault Codes Motorcycle Manuals PDF
2000 2001 Honda CBR929RR Fireblade Service Manual Moto Data Project
http://www.partsfish.com/page/oem-parts-for-honda
Honda CB Owners Manuals

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Jan 14, 2014 | 2001 Honda CBR 929 RR Fireblade

1 Answer

2001 Honda CBR 929 RR Fireblade fuel injection light is blinking


Hi, John, it should be noted that the reasons your EFI light stays on constantly or flashes and your bike will or will not start and may turn over or not, these conditions will vary from bike to bike depending on the year, make, and model and you should always refer to your owners/service manual for proper diagnostic procedures. It should also be noted that any type of prior work done to the bike or an abnormal event occurrence IE: adding accessories, electrical curiosity/adventures, laying bike down/crashes, rain storms/bike washings just before EFI light issues started can be significant hints/aids into tracking down the gremlin, also carry the appropriate jumper wire to access fault codes to reduce the risk of being stranded or towed, that being said the usual suspects are:
1. Faulty Fuel Pump, fuse or system relay switch.
2. Battery starting to fail due to old age/damage, perform a load test.
3. A discharged battery, check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
4. Faulty safety switches/sensors: run/off, ignition, clutch lever, neutral, side stand, tip over, fuel, and or their connections.
5. Broken wire or worn insulation exposing wire to a ground situation especially inside wire harness at tight bends around fairing brackets, under dash panels, under fuel tanks over cylinder heads etc. Many harnesses are open on the ends that will allow water to enter and accumulate at v-bends.
Dielectric grease and contact cleaner are your best friends for wire/cable/harness connectors, look for corroded, broken, or loose pins/sockets.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
http://www.fireblades.org/forums/honda-fireblade/63940-cbr-929rr-several-problems-fi-light.html Honda Motorcycles Fault Codes 2000 2001 Honda CBR929RR Fireblade Service Manual Moto Data Project
https://www.partsfish.com/page/oem-parts-for-honda
Honda CB Owners Manuals

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Mar 18, 2013 | 2001 Honda CBR 929 RR Fireblade

1 Answer

How to do a self diagnostics code test on a Chrysler Concorde LXI 2001


put key in ignition turn key to start position then off then to start then off then start and leave on. count the check engine light flashes. the first number will be a long flash then the numbers after will be short flashes, then a pause and then the next code will flash with the first number a long flash then followed by short flashes. count the flashes. if the first flash is a single flash and the next flash is say 3 quick flashes then this is code 13. these are a 4 number code system like 1013 is the same as a code 13. I hope you understand as its difficult until you get the hang of it. Chrysler has a code at the beginning to indicate codes starting and one at the end to indicated codes ending. and will repeat the cycle 3 times. it maybe easier to get them pulled using a code reader.

Mar 10, 2013 | 2001 Chrysler Concorde

1 Answer

Warning lights on dash of my cbr 929 rry


Instructions
    • 1 Place a rear stand under the motorcycle's swing arm to support it.
    • 2 Remove the right side fairing panel from the motorcycle, using a 5 mm Allen wrench to unscrew the fairing's bolts. Pull the fairing slightly away from the motorcycle. Reach behind the fairing and unplug the right front turn signal. Set the fairing aside.
    • 3 Shift the motorcycle into neutral and start the motor. Let it warm up for three minutes, then stop the motor.
    • 4 Place an oil pan beneath the drain plug on the bottom of the motor, centered between the exhaust pipes. Unscrew the filler cap from the clutch cover on the right side of the motorcycle.
    • 5 Unscrew the drain plug, using a 17 mm socket and a socket wrench, and drain the motor's oil into the oil pan. Clean the drain plug with a shop towel and reinsert it into the motor. Use a torque wrench to tighten the drain plug to 22 foot-pounds.
    • 6 Use an oil filter cap wrench to unscrew the oil filter from the right side of the motor.
    • 7 Spread an even coat of 10W40 motor oil over the new oil filter's O-ring. Screw the oil filter onto the motor by hand. Use a torque wrench to tighten the oil filter to 20 foot-pounds.
    • 8 Place a funnel into the clutch cover's filler. Pour up to 3.3 quarts of 10W40 motor oil into the motor. Remove the funnel and screw the filler cap into place.
    • 9 Reinstall the right side fairing panel, using a 5 mm Allen wrench to insert the fairing's bolts.
    • 10 Lower the motorcycle from the rear stand and rest it on its kickstand.

Jan 16, 2013 | 2001 Honda CBR 929 RR Fireblade

1 Answer

Rear antispin warning light??


You have a problem with your Rear Antilock Brake System (RABS) Your system outputs flash codes and all that is needed to retrieve the cods is a jumper wire.

Locate the RABS diagnostic connector. It is located in the main wiring harness on the driver's side just rearward of where the wiring harness goes through the firewall. (See the attached illustration) It is a single pin connector and has a black wire with an orange stripe. To get the codes, ground this wire with a jumper wire momentarily with the ignition in the "RUN" position. Watch the RABS warning light. It will start flashing.

To read the code, count the flashes. The code consists of several short flashes and ends with a long flash. Count the long flash as part of the code. For instance, if there are 4 short flashes and 1 long flash, then the code is 5. It is recommended that you read the code several times to make sure you are reading it correctly. The code will repeat itself until the ignition switch is turned off.

The trouble codes are as follows:
Code 1 (This is not a valid code)
Code 2 (open isolate circuit)
Code 3 ( open dump circuit)
Code 4 (closed valve switch or open dump valve)
Code 5 (system dumps too many times)
Code 6 (speed sensor signal rapidly cuts in and out)
Code 7 (no isolate valve self-test)
Code 8 (no dump valve self-test)
Code 9 (High sensor resistance)
Code 10 (Low sensor resistance)
Code 11 (stoplight switch circuit)
Code 12 (fluid level switch closed during a stop)
Code 13 (speed sensor check)
Code 14 (program check)
Code 15 (memory failure)

dttech.gif

Jan 16, 2011 | 1991 Ford F150

1 Answer

My display keeps shutting off five minutes after starting to watch TV- the sound continues, but the screen is black and the red warning light flashes


Hi,

Please check the sequence in which your warning light flashes.

I will tell you what might be the problem according to the fashing of warning light,
If,

Flashing repeatedly --- Improper voltage supply
Flashing once --- Malfunctioning of fan
Flashing twice ---excessive temperature
Flashing 3 time or more--other problem

When flashing occurs please remove the power cord from receptacle and inform your dealer about the flashing sequence.

Thanx

Jul 02, 2010 | Fujitsu Plasmavision 42" TV

1 Answer

2008 blade fuel injection warning light remains on when riding. when turning on ignition light flashes 3 x slow and 4 x fast.


The flashes are what is called a 'blink code' - in your case indicating Error No. 34

Error 34 is the ECV (exhaust control value) POT voltage.

Check is the 6-pin black connector to the EGCA (the valve actuator).

Hope this helps.

Jun 13, 2009 | 2008 Honda CBR 1000 RR Fireblade

1 Answer

2002 cbr 954 red light on gauge blinks


sounds like the engine management fault code signal. there is a free download service manual here. with it you should be able to decifer it http://www.carlsalter.com/motorcycle-manuals.asp

Apr 04, 2009 | 2002 Honda CBR 954 RR Fireblade

Not finding what you are looking for?
2001 Honda CBR 929 RR Fireblade Logo

Related Topics:

110 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4988 Answers

yadayada
yadayada

Level 3 Expert

80417 Answers

bazzz7071
bazzz7071

Level 2 Expert

342 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...