Question about 2004 kawasaki VN 800 A Vulcan

Open Question

No coolant from drain plug

Removed drain bolt to change coolant....nothing came out.....why???.....drained 2.4 litres of coolant at lower radiator hose....I'm confused

Posted by Anonymous on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 3 Answers

SOURCE: Drained radiator to change coolant. How do you refill radiator when reservoir only takes about 3/4 of a quart?

under the the gas tank

Posted on May 19, 2009

  • 738 Answers

SOURCE: Drained radiator to change coolant.

Remove cap from radiator and fill this way, the meaning of the word reservoir remove oir from the end and you are left with the word reserve, the mass of the coolant is located in the radiator, the resovoir holds the coolant that is exsess when the engine is hot and the water has expanded,

Posted on May 01, 2011

sisadsl
  • 1508 Answers

SOURCE: went to change oil klx

pin with the rounded end first , then spring , then plug
It helps the gear selecter stay in gears

Posted on Sep 08, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is the thermostat in my 95 Isuzu rodeo 3.2 ltr. V6


where is such a simple word
where;
3.2L V6, SOHC head 6VD1 (not the 6vd1w twin cam heads)
x marks the spot
asked many time here, and same answer.
if you look , you see it, then see its not possible to get to the 2 rear bolts (telling you what?)
pull engine block, ? no
pull intake, yes.

here-bp54dlzlp0pmj5fwzd335nwr-4-0.jpg

Mar 07, 2017 | Isuzu Rodeo Cars & Trucks

1 Answer

Diagram for taking out a radiator


Here is the procedure: Remove radiator cap, Drain coolant, remove drain plug located at bottom of radiator. Remove upper and lower radiator hoses, Remove electric fans mounting 4 bolts and disconnect electrical plug connection, Remove Hi & Lo transmission cooler lines connected behind radiator and finally, remove upper radiator mounting bolts located on top and remove radiator upward.

Nov 03, 2013 | 1997 Ford Taurus

2 Answers

Engine Diagrams


Hello. Here a non-photo diagram. Hope this helps!!!

The thermostat is located on the side of the water pump, the water pump is located just above the a/c compressor, the thermostat is fed coolant from the radiators lower radiator hose.
Thermostat :
1. drain coolant and tighten drain plug ( easier method : remove radiator cap, get big drain pan, place drain pan under lower radiator hose to radiator connection, remove clamp, slowly remove hose, allow coolant to drain into pan, now is a good time to remove radiator hose and clamp from thermostat housing )
2. remove thermostat cover / cap ( easiest to get at this when front of car is supported by jack stands and right hand side lower cover is removed ).
3. thermostat cap is held on by 3 bolts / remove thermostat.

You will notice that the thermostat's air bleed hole is pointing up and lines up with notch in water pump housing,,

ATTENTION :failure to install new thermostat in the correct location will cause engine to overheat.

1. install new thermostat to water pump, make sure air bleed hole lines up with notch, install and tighten bolts, install a new lower radiator hose, fill cooling system.

thermostat # 17670-77E00
lower radiator hose #17854-65G20
hose clamp #09401-36403
upper radiator hose # 17852-65G20

Suzuki factory manual

Oct 21, 2013 | Cars & Trucks

1 Answer

2000 plymouth breeze found drain plug on radiator turned it nothing came out i put 2 pitchers of water in so i know there is liquid in it


The area behind the drain plug on the radiator is likely plugged up with debris. Removing the lower radiator hose will do the same thing and a little faster. You also run the risk of the drain plug leaking if you remove it. Removing the lower hose will prevent this from happening as well. Let me know if you have any questions and I'll do my best to answer them. Thank you for using FixYa.com!

Feb 20, 2012 | 2000 Plymouth Breeze

2 Answers

I want to learn how to drain and flush my radiator. I need help on how to do so without making as mess


well its bound to make a little mess but you should have a drain plug on the radiator at the bottom towards the engine side on one of the 2 tanks (sides of radiator ) unscrew drain plug and let drain into a pail or pan ( 2 gallon ) after it drains remove lower radiator hose. use a garden hose and fill radiator and let it flush for a little, hook lower radiator hose back, tighten drain plug and fill with a 50/50 mix new antifreeze,

Feb 07, 2011 | 1996 Ford Taurus

1 Answer

Radiator replacement


Start by removing the shroud over the radiator area. There should be little plastic screws in it holding it on. Then drain the coolant from the old radiator. there should be a drain on the lower passenger side of the radiator facing the rear. looks like a white nut, turn that until fluid runs out. Make sure you have something available to catch the coolant. I used a small rubber hose attached to the end of drain to direct it to container. After all fluid has drained, disconnect the overflow hose running to the plastic bottle on right of radiator. Remove the 3 bolts holding the bottle in place, and remove. You will not have to remove fan and shroud from vehicle if you just remove the four bolts holding the blade itself to the pulley you can then slide them back far enough away from radiator to get it out. That will make things much easier. there are two other hoses that attach to the radiator 1 on upper passanger side and 1 on lower driver side, remove those. Then remove the two transmission cooling lines from the radiator and plug the ends to prevent dirt getting in. Once all hoses and lines are detached from radiator remove the two mounting bolts at top of the radiator where it attaches. Those are the only bolts holding it in. it rest inside grooves at bottom so you just pull up the radiator and you have it removed. Installation is the opposite of removal. Try to get your plastic (degas) bottle as clean as you can if your reusing . If radiator will not drain through plug for whatever reason, removing the lower driver side hose will drain very quickly but be ready for a rush of coolant. I hope this helps you out.

Jul 11, 2010 | 1998 Ford Expedition

3 Answers

Where is the drain plug for the radiator


Should be a drain **** at the bottom of the radiator that unscrews out. It looks like a wing nut has been welded to a bolt on the end of it. Another way to do this is just pull off the bottom hose.

Mar 31, 2010 | 2001 Jeep Cherokee

3 Answers

Where is the engine coolant drain bolt on a 2003 2azfe camry? i found the radiator drain but can't find the engine drain plug-a photo would be great


The textbook method is to remove the drain plug on the bottom of the radiator.

Most drain plug is make of inexpensive nylon/plastic and it may fall apart while you turn it.

The professional method is to loosen the lower radiator clamp and drop to lower radiator hose.

Drain the coolant onto a large drain pan and recycle the coolant

===

I just did a FREE write up on air purge from coolant system and how to detect initial state of blown head gasket at the Fixya tip selection.

Click HERE

or follow link below.

http://www.fixya.com/cars/r3582329-how_to_inspectdiagnose_and_repair_minor_

Nov 17, 2009 | 2003 Toyota Camry

2 Answers

Where is the radiator drain plug on a 2005 kia sedona?


The textbook method is to remove the drain plug on the bottom of the radiator.

Most drain plug ismake of inexpensive nylon/plastic and it may fall apart while you turn it.

The professional method is to loosen the lower radiator clamp and drop to lower radiator hose.

Drain the coolant onto a large drain pan and recycle the coolant

===

I just did a FREE write up on air purge from coolant system and how todetect initial state of blown head gasket at the Fixya tip selection.

Click HERE

or follow link below.

http://www.fixya.com/cars/r3582329-how_to_inspectdiagnose_and_repair_minor_

Nov 08, 2009 | 2005 Kia Sedona

1 Answer

My heat will suddenly go cold, then after a while it will work again. i think it may be the thermostat, but i'm not sure. I have all the tools to do a thermostat change, I just don't know where it is on...


Removal & Installation CAUTION When draining coolant, keep in mind that cats and dogs are attracted to ethylene glycol antifreeze, and could drink any that is left in an uncovered container or in puddles on the ground. This will prove fatal in sufficient quantity. Always drain the coolant into a sealable container. Coolant should be reused unless it is contaminated or several years old.

  1. Raise and support the vehicle safely on jackstands.
  2. From the driver's side portion of the radiator, open the draincock and drain the radiator so the coolant level is below the coolant outlet elbow which houses the thermostat. If the radiator has been replaced, the replacement unit may not have a draincock. In this case the lower radiator hose will have to be loosened and removed to allow for the coolant to drain out.
On some models it may be necessary to remove the distributor in order to gain access to the thermostat housing mounting bolts.
  1. Remove the outlet elbow retaining bolts and position the elbow clear of the intake manifold or cylinder head to provide access to the thermostat.
5eb8a98.jpg Loosen and remove the bolts and/or stud which secure the thermostat housing to the engine

Installation is in reverse order....

The housing that "holds" your thermostat is right below the distributor.

Oct 31, 2009 | 1987 Mercury Grand Marquis

Not finding what you are looking for?
2004 kawasaki VN 800 A Vulcan Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...