Question about 2004 Honda CBR 1000 RR Fireblade

2 Answers

HELP ME WITH HOW DISABLE A HONDA IGNITION SECURITY SYSTEM

I PURCHASED A USED MOTOR BIKE HONDA CBR1000 RR SLIGHTLY DAMAGED, IN AFRICA AND NOTICED THAT THERE IS H.I.S.S LOCK IN THE SYSTEM THAT MAKES IT ALMOST IMPOSSIBLE TO START. I AM COUNTING ALL MY HOPE ON YOU. THANK U.

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,567 Answers

Go to this site and you can download a free PDF factory service manual. There should be a wiring diagram in the electrical section and somewhere there should be information on HISS. I have never worked with HISS so can't advise how to disable. Once you get the HISS taken care of you now have a manual for other repairs also!
www.carlsalter.com/motorcycle-manuals.asp

A “very helpful” rating for this answer? Thanks!

Posted on Jun 18, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

When you download from pirate sites like www.carlsalter.com/motorcycle-manuals.asp , most likely all you will get is a virus.

Honda doesn't put instructions on how to disable their security system in the factory service manual. The whole point of the system is to discourage theft. Why would they publish a manual with instructions for how thieves can disable it? Why would they deliberately design it to be disabled? That would defeat the whole point.

The correct answer is to contact a Honda dealer and see if they can program new keys for you. You can buy the special transponder key blanks from the dealer or the aftermarket, but the dealer has to help you program the transponder.

Posted on Feb 08, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2004 honda cbr1000 fuel pump relay location


Hi, Anonymous for this scenario you will need your service/owners manual if you can't find the best tool you ever bought for your Honda, despair not, for a mere $10 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
2004 honda cbr1000 fuel pump relay location Google Search
Where is the location of the fuel relay on 04 05 cbr1000rr
2004 2005 CBR1000RR Fireblade Repair Manual Download Manuals Technical
http://www.partsfish.com/page/oem-parts-for-honda
Honda CBR1000RR Fireblade Owner Manual

Oct 30, 2012 | 2004 Honda CBR 1000 RR Fireblade

1 Answer

2004 Honda CBR 1000 RR - running rough


Have you had the computer control module scanned for fault codes yet? You need to have this done by a dealer. Until you do that you are just guessing, and Honda doesn't sell any parts for less than your arm and my leg. Bottom line scan the system.

Feb 17, 2012 | 2004 Honda CBR 1000 RR Fireblade

1 Answer

I have a honda cbr rr 600 i need to know how to change the radiator and the fan is also not working the bike runs very hot due to the radiator duhh rite but anyway if u can help me out i would highly...


Park the bike in a flat, easily accessible area, and stand the bike on its center stand. This will make the bike much easier to work on, and less likely to fall...drain coolant.
Use a standard Phillips screwdriver to remove the motorcycle's radiator shroud covers. On most Honda CBR models, the shroud covers will be secured by only three bolts...disconnect electrical end connections on the bottom edge of the radiator fan. Look for things like solder gapping, bubbling and corroding...Remove coolant hoses & mounting bolts & slide radiator and fan out. Inspect your hoses, flush and clean system. I would change thermostat now also. Make sure to use only Honda approved coolant when you refill. This is very important for the life of the pump and cooling system. Good luck, i hope this helps.

Jul 05, 2011 | 2006 Honda CBR 600 RR

1 Answer

Where can I get an after-market muffler to fit my 1992 Honda CBR1000FN motorbike?


Here is a link to a quality system that sounds great. Do not forget to rejet the bike as well. I use jet kits from dynojet.
http://www.bikebandit.com/1992-honda-cbr1000-full-systems/c/a644017?mg=1031&t=1

Apr 29, 2011 | Honda CBR 1000 F Motorcycles

1 Answer

2005 Honda CBR 1000 RR Fireblade bleed cooling system


Hi, Geoff for this scenario you will need your service/owners manual if you can't find the best tool you ever bought for your Honda, despair not, for a mere $10 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
How to bleed air from coolant system Honda CBR1000 Forum 1000RR net
How to Coolant Flush Honda CBR 1000RR 12 part 1
2004 2005 CBR1000RR Fireblade Repair Manual Download Manuals Technical
http://www.partsfish.com/page/oem-parts-for-honda
Honda CBR1000RR Fireblade Owner Manual

Oct 28, 2010 | 2005 Honda CBR 1000 RR Fireblade

1 Answer

My new 08 cbr1000 is pushing out some major heat around my ankles. i have had three gixxers and never felt heat like this. the temp gauge on bike is normal.


Like you are sitting on a blow torch. I know, some bikes do it and some don't. My Ducati is like a pizza oven, but when you are freezing to death, you don't feel any heat. My buddies Kaw is the same way. If you look at your fairing, it is funneling the heat right to your ankles.

Apr 11, 2010 | 2008 Honda CBR 1000 RR Fireblade

1 Answer

CBR 1000rr wont start


check for spark, make sure the test plug is grounded to the engine or it can damage electrics

Apr 10, 2010 | 2004 Honda CBR 1000 RR Fireblade

1 Answer

Bikes been dropped and need to reset fi light, how??


Hi and welcome to FixYa,

Initially, check / bypass or replace the bank angle sensor.

Good luck and thank you for asking FixYa.

Apr 09, 2010 | 2007 Honda CBR 1000 RR Fireblade

2 Answers

I PURCHASED A USED, SLIGHTLY DAMAGED HONDA CBR1000 RR IN AFRICAN USED GOODS MARKET AND FOUND OUT THAT THERE IS A HONDA IGNITION SECURITY SYSTEM(H.I.S.S.) ON THE BIKE MAKING TOTALLY IMPOSSIBLE TO START. YOU...


you are going to need to find the security box for the bike and try a few things first disconnect the negitive on the battery and wait for 15-30 min longer the better. then hook neg back up and try. if that does not work you are going to need to pull the security box off the bike. if it is in with the ecu of the bike you are going to have to go and have it reprogramed at the dealer.

Jun 20, 2009 | Honda CBR 1000 RR Fireblade Motorcycles

Not finding what you are looking for?
2004 Honda CBR 1000 RR Fireblade Logo

2,182 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

bazzz7071
bazzz7071

Level 2 Expert

342 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...