Question about 2002 Yamaha YZ 426 F

1 Answer

Fork oil level - 2002 Yamaha YZ 426 F

Posted by Anonymous on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Yamaha Master
  • 39,973 Answers

Hi, Anonymous for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
01 yz426 fork oil specs YZ 400 426 450
00 YZ426 fork oil level
Yamaha YZ426F Owner Service Manual
OEM parts for Yamaha
Yamaha YZ450F Owner Manual Page 3

Posted on Aug 02, 2016

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 3567 Answers

SOURCE: fork oil level

Forks can get pretty complicated. If they have been worked on it is not just re-filling with oil to a certain level. That would be the case if the seals leak a bit and all you are doing is adding oil to replace what has gotten past the seals. I am giving you a site where you can download a free factory service manual. Everything on servicing the forks and the rest of the bike is in the manual. There is a 2003 manual on the site. Your 2004 forks are the same as the 2003. All other service procedures are also the same. Go to this site and you can download a free PDF service manual. The site may take up to 20 seconds to load the complete list of manuals. Please rate my answer. Thanks!
www.carlsalter.com/motorcycle-manuals.asp

Posted on Nov 22, 2009

  • 67 Answers

SOURCE: amount of oil in forks

The forks have to be bled correctly, then oil filled to the correct level by oil level (height) measurement. You need the service manual for your model if you are not familiar with the procedure. Since you asked the "amount" instead of "level" in millimeters - I assume you need the manual.

Posted on Feb 16, 2010

  • 653 Answers

SOURCE: 07 rmz 450 fork oil lvel

about 200-250cc in each fork. Good?

Posted on Apr 26, 2010

SOURCE: i need to know the oil level per fork for a

Oil Capacity each fork 286+/-4cm cubed {10.1+/-0.14Impoz,9.67+/-0.14US oz}
please visit this site for more info --> http://www.xjbikes.com/Forums/viewtopic/t=18730/highlight=seca+fork+rebuild.html

Posted on Jun 10, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the oil apacity or oil level and the fork oil weight for the front fork of a Kawasaki ZX1200b 2002?


474ml when totally dry and 405ml when changing the oil according to the manual. The level should be 124mm from the top of the fork tube with the fork compressed and the spring removed. 20w

Oct 02, 2014 | Motorcycles

1 Answer

Whats the correct amount of fork oil per leg in cc yamaha tw 125 2002 thanks


Front fork leg oil level (from the top of the inner tube, with the inner tube fully compressed and without the fork spring) 135 mm

Sep 29, 2014 | Yamaha Motorcycles

1 Answer

How to change fork seals in a 2008 fxd


To change the fork seals in a 2004 FXD you will need to remove the forks from the bike and then drain the oil and then remove the dust seal and the retaining ring and spacer from the top of the fork and then remove the Allen head screw from the bottom of the fork to release the fork tube and then using the fork tube like a slide hammer drive the upper bushing, seal and spacer out the top of the slider. While apart you should also inspect the rings and bushings etc. You will need a special seal driver to reinstall the upper bushing, seal and spacer and then you will need to accurately refill the fluid to the correct level/amount. FXD/FXDL uses 10.6 OZ or 0.31 cc of Harley-Davidson TYPE E FORK OIL (Part No. HD-99884-80) and the level measurement is 6.69 inches or 169.9 mm. Be very careful and accurate with the oil level as too much or too little will adversely affect the function, ride and steering of the bike. It is best to use a fork oil level gauge and set it so that the ring will sit 6.69 inches or 169.9 mm from the end of the tube and secure it at that position. If your gauge has a plunger cylinder on it push the plunger on the cylinder all the way in and then with the fork tube bottomed in the fork slider, insert the tube until the ring rests flat on top of the fork tube and pull the plunger out to suck up excess oil from the fork tube. If no oil is sucked up into the gauge cylinder you need to add more oil until there is enough excess oil in the fork tube to have an excess amount sucked out of the fork tube. In this manner the gauges and cylinder will accurately set the fork oil level. If you have a vacuum operated gauge such as with a tool that attaches to a vacuum brake bleeder you will set the tool at 6.69 inches or 169.9mm as with the other type of tool and operate it the same way to remove excess oil to a precise and accurate specified fork oil level which is very important as an incorrect oil level can adversely affect motorcycle handling.

Jul 12, 2014 | 2004 Harley Davidson FXD - FXDI Dyna Super...

1 Answer

2005 Yamaha YZ 85 fork oil capacity


Standard oil level:
90 mm (3.54 in)
Extent of adjustment:
80 ~ 120 mm (3.15 ~ 4.72 in)
From top of outer tube with
inner tube and damper rod fully
compressed without spring.

CAUTION:
Adjust the oil level in 5 mm (0.2 in) incre-
ments or decrements. Too low oil level
causes the front fork to produce a noise at
full rebound or the rider to feel some pres-
sure on his hands or body. Alternatively,
too high oil level will develop unexpectedly
early oil lock with the consequent shorter
front fork travel and deteriorated perfor-
mance an characteristics. Therefore, adjust
the front fork within the specified range.

Apr 03, 2013 | 2005 Yamaha yZ 85

1 Answer

How much fork oil in each fork


Every Honda motorcycle is different you have to give the year and model to get an accurate answer on the fork oil level. A wrong fork oil level will damage the forks.

Aug 27, 2010 | Honda CB 600 Hornet F Motorcycles

3 Answers

I need to know the oil capacity of the front forks on my 1999 Suzuki Marauder VZ800.


FORK OIL
• Place the front fork vertically without spring.
• Compress it fully.
• Pour specified front fork oil up to the top level of the outer
tube.
Capacity (each leg): 490 ml (16.6/17.3 US/lmp oz)
99000-99044-L01: SUZUKI FORK OIL L01
or an equivalent fork oil
• Move the inner rod slowly with the special tool ten times and
more until no more bubbles come out from the oil.
09940-52841: Inner rod holder
NOTE:
Refill front fork oil up to the top of the outer tube so that bubbles
are visible while bleeding air.
• Refill specified front fork oil up to the top level of the outer
tube again. Move the outer tube up and down several strokes
until no more bubbles come out from the oil.
• Keep the front fork vertically and wait 5 – 6 minutes.
NOTE:
* Always keep oil level over the cartridge top end, or air may
enter the cartridge during this procedure.
* Take extreme care so as to pump out air completely.
• Hold the front fork vertically and adjust fork oil level with the
special tool.
NOTE:
When adjusting the fork oil level, compress the outer tube fully
without the fork spring.
Fork oil level: 153 mm (6.02 in)
09943-74111: Front fork oil level gauge

Dec 18, 2009 | 1998 Suzuki VZ 800 Marauder

1 Answer

What is the fork oil level after replacing seals


Here is a manual for your bike....search for English parts of it.....
http://safemanuals.com/user-guide-instructions-owner-manual/HUSQVARNA/CR%20125-_M

The manual has directions for taking out parts, putting in SAE 5 or SAE 7.5 fork oil, and then measuring the distance from the top of the fork tube to the top of the oil. It should be 3.5 inches. That doesn't sound right, but maybe that is with the forks compressed, the directions may be indicating that. You could judge by the amount you drained out of the forks. Here are the directions in the manual.......
OIL FORK LEVEL
For the regular fork operation,
both legs must be provided with
the necessary oil quantity.
Remove the forkrods from the
fork to check the oil level inside
the forkrods. Work as follows:
- remove the power rod caps;
- remove springs from the stems
letting the oil drop into the
latter;
- bring forks to stroke end;
- check that the level is at
distance “A” below the upper
limit of rods.
(distance A is 3.5 inches)

Oct 03, 2009 | 2002 Husqvarna CR 125

1 Answer

Oil level in front forks


Recommended fork fluid: Pro-Honda Suspension Fluid SS-8 Fork fluid capacity/level: 474 ± 2.5 cm3 (16.0 ± 0.08 US oz)/100 mm (3.9 in)

May 18, 2009 | 2005 Honda VT 750 Shadow Aero

3 Answers

KX 125 (2003) motorcycle


its 120 mm or 4.7 inches from the top of the fork
Some measure the oil quantity and fill the fork up, some fill the fork up and measure the oil level. The most correct method is to measure the level, I guess, but many guys measure in quantity.. both ways work well.
1dcced6.jpg

Nov 26, 2008 | 2003 kawasaki KX 125

Not finding what you are looking for?
2002 Yamaha YZ 426 F Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

dhnguyen

Level 2 Expert

281 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1144 Answers

Tony

Level 3 Expert

2600 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...