Question about 1997 Suzuki GSF 250 Bandit

Open Question

How do you raise seat on 650 suzuki bandit - 1997 Suzuki GSF 250 Bandit

Posted by Anonymous on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 2336 Answers

SOURCE: raise the seat

First take off the seat, turn it upside down, unscrew the two screws and two bolts that hold the two parts of the seat together. Separate the pillion and rider seat (takes a bit of wiggling), now you can concentrate on the riders seat. undo the four screw that hold all the rubber gromets down (make a note of the direction they are facing), and unbolt the two small bolts on the front. The seat should now come apart, move the bracket at the back of the seat down a hole. Re-attach the two halfs of the seat at the front but this time one hole up. You should see a gap between the two halfs. Put the rubber gromets back on, this is where I went wrong the first time, TURN THE FRONT TWO 180 degrees and leave the back ones how they are. Screw everything back together and you have one raised seat my long legged friend.

Posted on Nov 10, 2008

  • 2336 Answers

SOURCE: raise the seat

First take off the seat, turn it upside down, unscrew the two screws and two bolts that hold the two parts of the seat together. Separate the pillion and rider seat (takes a bit of wiggling), now you can concentrate on the riders seat. undo the four screw that hold all the rubber gromets down (make a note of the direction they are facing), and unbolt the two small bolts on the front. The seat should now come apart, move the bracket at the back of the seat down a hole. Re-attach the two halfs of the seat at the front but this time one hole up. You should see a gap between the two halfs. Put the rubber gromets back on, this is where I went wrong the first time, TURN THE FRONT TWO 180 degrees and leave the back ones how they are. Screw everything back together and you have one raised seat my long legged friend.

Posted on Nov 10, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I reset the alarm on a 2001 Suzuki Bandit after replacing the main battery on the bike ?


Hi, Phill for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for Suzuki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Bandit 1200 Electrical problem
Suzuki Bandit 650 Immobiliser Alarm
Suzuki GSF600Y 2000 Service Manual
OEM parts for Suzuki
http://mybikemanuals.com/suzuki

May 08, 2017 | 2001 Suzuki GSF 600 S Bandit

1 Answer

I HAVE A SUZUKI GSF650 BANDIT K6 PROBLEM, I'VE REMOVED THE FUEL TANK , AND WHEN I RE- ASSEMBLE IT IT SEEMS I MISS PLACED THE UNDER TABK WIRES , AND THE BIKE IS NOT WORKING !


it just like you said...you'll have to take the tank, seat, and fairings back off and search everywhere for them..they'll be there, unless someone cut them off.....you might have to put in some extra time start at the rear and work forward..hope you find them.

Nov 16, 2009 | 2005 Suzuki GSF 650 N Bandit

2 Answers

Battery access


it should be located under the seat

Aug 05, 2009 | 2005 Suzuki GSF 650 N Bandit

3 Answers

Ive lost the manuel for my 2005 Suzuki GSF 650 Bandit k5. Is there somewhere i can download a free copy?


http://www.manualesdemecanica.com/en/service-manuals.html?func=fileinfo&id=603

"This manual contains an introductory description on the SUZUKI GSF650/S and procedures for its inspection/service and overhaul of its main components."

You need to register, but it's free. Don't know if they spam alot, but it might me a good idea to use some other e-mail account than your primary one.

Regards,
Chris

Jun 05, 2009 | 2005 Suzuki GSF 650 N Bandit

2 Answers

Lost manual what are the tyre pressures for suzuki bandit 650


According to my Haynes manual for 600 and 1200 Bandit fours the correct pressues are 33psi front and 36 psi rear

Sayin that it says the 1200 is 36psi front and rear and everyone kens it's 36 and 42

Apr 13, 2009 | 2005 Suzuki GSF 650 S Bandit

1 Answer

Raising the seat on my 1983 Yamaha Venture


Custom seat - take your seat to a local upholstery shop (I prefer places that do boat seats since the bike seat is out in the weather like a boat seat is) and ask them to add some more foam to build the seat up higher. Custom seat makers like Corbin, Mr. Eds, and Russell day-long saddles can do this too. You might consider moving the seating position back some too, this will reduce the passenger room but make your riding more comfortable.

You can also relocate your foot pegs for some extra room, if there is a kit for your bike. Touratech has kits for some bikes. If you are or know a skilled fabricator you can have some made.

Mar 17, 2009 | 2005 Suzuki GSF 650 N Bandit

1 Answer

Tire pressure


For the 600 it's 33psi (2.25 Bar) for the front and 36 psi (2.50 Bar) for the rear

Nov 10, 2008 | 2005 Suzuki GSF 650 N Bandit

1 Answer

Raise the seat


First take off the seat, turn it upside down, unscrew the two screws and two bolts that hold the two parts of the seat together. Separate the pillion and rider seat (takes a bit of wiggling), now you can concentrate on the riders seat. undo the four screw that hold all the rubber gromets down (make a note of the direction they are facing), and unbolt the two small bolts on the front. The seat should now come apart, move the bracket at the back of the seat down a hole. Re-attach the two halfs of the seat at the front but this time one hole up. You should see a gap between the two halfs. Put the rubber gromets back on, this is where I went wrong the first time, TURN THE FRONT TWO 180 degrees and leave the back ones how they are. Screw everything back together and you have one raised seat my long legged friend.

Nov 10, 2008 | 2005 Suzuki GSF 650 N Bandit

2 Answers

Raise the seat


First take off the seat, turn it upside down, unscrew the two screws and two bolts that hold the two parts of the seat together. Separate the pillion and rider seat (takes a bit of wiggling), now you can concentrate on the riders seat. undo the four screw that hold all the rubber gromets down (make a note of the direction they are facing), and unbolt the two small bolts on the front. The seat should now come apart, move the bracket at the back of the seat down a hole. Re-attach the two halfs of the seat at the front but this time one hole up. You should see a gap between the two halfs. Put the rubber gromets back on, this is where I went wrong the first time, TURN THE FRONT TWO 180 degrees and leave the back ones how they are. Screw everything back together and you have one raised seat my long legged friend.

Nov 10, 2008 | 1997 Suzuki GSF 250 Bandit

Not finding what you are looking for?
1997 Suzuki GSF 250 Bandit Logo

Related Topics:

13 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Ed Nelson
Ed Nelson

Level 2 Expert

149 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...