Question about 2006 Gilera Runner VRX 200
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
This sounds more like a lean fuel condition than ignition. If it was stored over the winter without the gas being drained or a fuel stabilizer being added, you'll likely have varnish build-up in the fuel system that is not allowing sufficient fuel flow. If your engine is fuel injected, it's likely your injector is partially clogged. If it's carbureted, your carb jets may be partially clogged or your carb float may be sticking and not allowing the needle valve to fully open. Fill the gas tank with fresh gasoline, but leave enough room for a can of Sea Foam. The Sea Foam may be able to break up the deposits and allow fuel to flow again. However, there's no guarantee and the fuel system may have to be disassembled to be cleaned.
Posted on May 05, 2009
If your Sitting on your bike. Its on the right side. The (silver) panel that is covering or surrounding the pillions footrest. Unscrew 3 small screws and one large one behind the pillions foot rest. Remove panel. Look into and downwards, you will see the wire that is connected to the spark plug. I just changed my plug today :) Hope this helps.
Posted on Sep 15, 2009
Tips for a great answer:
May 08, 2016 | Gilera Motorcycles
Apr 23, 2016 | Better Motorcycles
Jan 14, 2015 | Health & Beauty
May 19, 2014 | 2005 Gilera Runner VXR 200
Apr 08, 2010 | 2005 Gilera Runner VX 125
Jan 23, 2010 | 2005 Gilera Runner VRX 200
Jan 13, 2010 | 2005 Gilera Runner VX 125
Jan 12, 2010 | 2006 Gilera Runner VRX 200
Jan 02, 2010 | 2005 Gilera Runner VX 125
Aug 07, 2013 | 2006 Gilera Runner VRX 200
14 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: