Question about Yamaha FZR 600 Motorcycles

1 Answer

Popping during running - FZR 600 Yamaha Motorcycles

Posted by Anonymous on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Yamaha Master
  • 40,021 Answers

Hi, Anonymous popping on deceleration is usually caused by an air leak in the exhaust system and is generally located where black carbon soot is seen as a flashing build up from any joint connection. This condition can easily be remedied by removing and cleaning both joint pieces and reassembling with high temp silicone and the correct torque applied to the exhaust clamps where present. Coughing is usually caused by an air leak in the intake system and will generally have the same telltale signs of location by a wet or damp buildup of oil/gas seepage at the intake manifold to cylinder head or carburetor connection and in rare instances a worn throttle plate shaft and or seals. Spitting is usually caused by a faulty accelerator pump and or nozzle, or the float bowl needle and seat leaking and overflowing through the main jet mixing well nozzle, or the air-fuel mixture ***** set to lean. For more information about your issue and valuable "FREE" downloads that you need please visit the websites below. Good luck and have a nice day.
Info needed on running lean rich
View topic Carb Tuning Who Undserstands Carburetors
https://www.tradebit.com/filedetail.php/269137237-yamaha-fzr600-1989-1999-factory-service-repair-manual
OEM parts for Yamaha
http://www.fzrarchives.com/fzr600/600_manual/1999fzr600r.pdf

Posted on Mar 24, 2016

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Mercedes Viano 2013 Long diesel... Hi, my rear off side manual sliding door has started to 'pop' open during journeys of various speeds but normally longer journeys 20 miles plus...


You have a unibody vehicle. After running it, the heat will make it move/stretch. Things don't quite align properly. Think about it like your house when the sun sets and you start hearing it creaking and popping. Or between winter and summer, when the doors or windows don't close the same. Same applies to vehicles.

Sep 07, 2015 | Cars & Trucks

2 Answers

Popping noise vacuum


Please give us some more details like the brand and model of your vacuum and whether the popping noise comes when you first start the vacuum or when it shuts down or during the whole time that it is running. With details like that we can be of better service to you in giving you advice.

Apr 17, 2015 | Vacuums

1 Answer

Popping sounds only during video/ you tube on tv from my computer.


Because of the amount of voltage required to run the older-style "tube" televisions, many problems, sounds and noises occur in tube televisions than in the newer, flat-panel televisions. Sounds occur for multiple reasons, with some being just part of the normal process these televisions run through in order to operate. On the other hand, some of these noises may indicate a problem with the television that could warrant repair.


Worn Insulation
Voltage against metal. Inside your television's tube, there are many wire parts that electricity runs through in order to make the television run. Usually, these parts are insulated with a rubber or foam casing that prevent the sound of the electricity. If the insulation surrounding these components is thin, weak, worn or absent, you are bound to hear buzzing, popping and cracking sounds coming from your television. While this may not mean you have to run out tomorrow and get a new one, the chances are that your TV's tube is working extra hard to make it all happen for you, and you may want to start pricing new sets for the near future. b> Static During Warm-Up b> Just like rubbing your feet on a thinly-carpeted floor can cause static electricity, the same can also build up inside your television. If the noise is relatively subtle, only occurring when you first turn it on, and not overly-disturbing, the chances are that the cracking and popping sounds you are hearing are just the television's way of warming up and getting rid of the unnecessary electricity. Bad Lamp b> Deep inside the heart of your tube television, there is a light-bulb fixture that makes the entire unit light up so that you can see a picture. If the cracking and popping sounds you are hearing tend to go along with the picture on the TV becoming unclear, it could be that the picture tube is failing. It is very difficult and costly to replace the picture tube on a tube TV, so this is an instance where you may benefit more from buying a new television than taking the old one in for repair. Hope this helps.

Dec 21, 2012 | Computers & Internet

1 Answer

Cracklin/popping with m audio bx8 d2's thru fast tack mk2


Check for flucuations in your power supply. If none then put a shield sleeve on your cord.

May 03, 2012 | Avid M-Audio BX8 D2

1 Answer

Crackling and popping during playback/recording, latency issues. Using Firestudio Project, Windows 7 and Cubase 5.


Turn OFF all resource hogs such as Anti-virus, Anti-pop-up, and other background programs. Disconnect all internet access such as wireless and Ethernet service programs. All these resource hogs and programs for instance that keep track of when to run scans just cause interrupts of the servicing of the high speed audio grabbers. Your machine should be BARE of all these hogs.

Feb 23, 2011 | PreSonus Firestudio 2626 26x26 + Cubase...

1 Answer

With bike warm and choke off my 2002 crf450 pops on deacceleration. reves and runs exellent only on de aceeleration will it pop.


Popping during deceleration is unburned fuel igniting in the exhaust system. Four stroke dirt bikes are highly prone to this. However, you should be able to minimize the popping by restricting the air leaking into the exhaust. Replace the exhaust gasket in the head between the head and head pipe and the head pipe to the muffler. If there is no gasket between headpipe and muffler you may be able to improvise with a strip of fiberglass cloth

Sep 22, 2010 | 2004 Honda CRF 450 R

1 Answer

Freezes up during start up. Mouse does not respond, beep and then nothing. What can be done?


click on start menu> click on run (winXp) or start search (winvista or win7) > type in msconfig> click ok
a new pop window
click on startup> on the bottom part click on disable all> click apply and then ok> restart pc

Apr 01, 2010 | Acer Aspire One AOD250-1924 Netbook

1 Answer

1996 royal star, left rear valve seems to be sticking or something, getting rough idle with lots of backfire popping from that pipe, and motor is missing badly during takeoff and downshift idling. anybody...


The The Air Injection System AIS for that cylinder could be leaking (chrome pipe running up to a fitting right by the exhaust pipe) or more likely the rubber pipe that goes from the engine intake to carburetor is either loose at the engine or carburetor, or the rubber pipe is cracked, split or broken. This would cause air to be sucked into the crack, split or loose fitting during during acceleration or downshifting.

Aug 27, 2009 | 1996 Yamaha Royal Star XVZ 1300 A

1 Answer

Dishwasher pops the circuit breaker


Hi,

Here is a tip that I wrote that will help you ti find out why the circuitbreaker is tripping.

Circuit Breaker Keeps Tripping
heatman101

Jul 01, 2009 | Whirlpool GU1100XTLB / GU1100XTLQ /...

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

11 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

dhnguyen

Level 2 Expert

281 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1144 Answers

Tony

Level 3 Expert

2600 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...