Question about Harley Davidson XL 1200 C Sportster Custom Motorcycles

1 Answer

Exhuast stud tourque setting - XL 1200 C Sportster Custom Harley Davidson Motorcycles

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Renaissance:

    An user who is expert in 3 categories / brands.

  • Harley Davidson Master
  • 1,554 Answers

If you mean the nut that threads onto the stud to compress the exhaust pipe flange, 10-15 Ft-Lbs

Posted on Apr 12, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Exhuast stud torque setting


Be careful,you dont want to over tighten and break studs ,just use lock washer and snug up,thats all,done lots of exhaust changes on my 94 Wide Glide quite easy,take care.

Apr 12, 2014 | Harley Davidson XL 1200 C Sportster Custom...

1 Answer

Tourque specs


torque the cylinder head bolts to eighteen (18) foot pounds (ft/lbs) in the sequence shown in the attached photo.
27b117e1-d4c4-4596-8a8a-f275444e8ed9.jpg

Dec 07, 2013 | 1995 Isuzu Pickup

1 Answer

Tourque specs


what engine 1,6 zetec

Mar 24, 2010 | 2004 Ford Focus

1 Answer

How to install twin kadrons on a stock 1600 and do i need to install anything else first


fuel pressure needs to be between 1.5 and 2 psi (after the fuel filter) unbolt the throttle cable and remove all hoses from the existing carb. remove the air cleaner. unbolt the intake from the heads and from the exhuast. remove the whole assembly from the vehicle. go ahead and set your valve clearances. plug the preheat hole in the exhuast manifold. install the studs on the intake. apply a little oil on the mating surfaces then apply the gasket, install the carb onto the manifold and the manifold onto the head. do the same for the other side. install the linkage and filter. set the jets all the way in on both sides then back them out two full turns and that should get you to where you can start it. then sync and adjust them accordingly.

Jul 08, 2009 | 1998 Volkswagen Beetle

1 Answer

Taking torque converter inspection plate off 86 s10 blazer


Hello tapout383: My name is Roger and I will answer for you. There is no way to remove the flywheel cover with out dropping the exhaust. I have tried every way you could imagine. You will also need to replace the donut gaskets when you put it back together.Be careful not to break the exhaust studs when you loosen them. Good luck on your repair. Please rate the quality of your answer. This is how we track you received the correct answer. Thank You for using FixYa. Roger

May 06, 2009 | 1986 Chevrolet S-10 Blazer

1 Answer

Tourque specs for 1968 camaro


Do you mean the tightness of the ball joint nuts? If you do use 55lbs, then tighten further if cotter pin hole does not line up. DON'T back off to get pin to go in!

Apr 18, 2009 | Chevrolet Camaro Cars & Trucks

1 Answer

Exhuast leak manafold bolt stipped


you need to drill out the manifold bolt and replace the stud,  Or buy a used manifold from the junk yard

Mar 26, 2009 | 1991 Toyota Pickup

1 Answer

Need to know what tourque for the valve cover bolts, 97 tercel


10 foot/pounds. Hint from experience, change the gasket.

Dec 04, 2008 | 1997 Toyota Tercel

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

73 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4521 Answers

Mike

Level 3 Expert

4339 Answers

yadayada
yadayada

Level 3 Expert

76070 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...