Question about Harley Davidson XL 1200 C Sportster Custom Motorcycles

1 Answer

Tourque setting for exhaust stud - XL 1200 C Sportster Custom Harley Davidson Motorcycles

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that got 5 achievements.


    An expert who has answered 20 or more questions within one hour.


    An expert who has answered 20 questions.

  • Contributor
  • 40 Answers

8pound is what most of them are

Posted on Apr 13, 2014


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Exhuast stud tourque setting

If you mean the nut that threads onto the stud to compress the exhaust pipe flange, 10-15 Ft-Lbs

Apr 12, 2014 | Harley Davidson XL 1200 C Sportster Custom...

1 Answer

Exhuast stud torque setting

Be careful,you dont want to over tighten and break studs ,just use lock washer and snug up,thats all,done lots of exhaust changes on my 94 Wide Glide quite easy,take care.

Apr 12, 2014 | Harley Davidson XL 1200 C Sportster Custom...

1 Answer

Remove exhaust port bolts from 2005 FXDLI

Are they BOLTS, or nutted STUDS?

If bolts, put a wrench to them!

IF you mean how to remove the studs AFTER the exhaust is removed, screw two nuts onto the stud, tighten them together, the loosen the stud by turning the nut closest to the cylinder head.

To install studs, double nut again, and turn nut FURTHEST from cylinder head to install.

Feb 17, 2014 | 2005 Harley Davidson FXDL - FXDLI Dyna Low...

1 Answer

Ttr 125 exhaust stud size

Hi, Anonymous for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry. For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Help nneded Exhaust manifold stud snapped off
How to remove exhaust studs
YAMAHA TT R125 Owner Service Manual
OEM parts for Yamaha

May 25, 2012 | Yamaha TTR 225 Motorcycles

1 Answer

I need to install an exhaust stud on my 2010 wide glide 96 ci

You need two nuts that match the thread on the stud.. you thread the stud in far as you can by hand then the two nuts thread them both on to the stud till just just enough to be securely on the stud. then then oppose thread them so the two nuts lock against each other turn the top nut clock wise to tight stud and tun the bottom nut anti clock wise to undo the stud to remove the two nuts turn them simultaniously in opposite direction to loosen then just undo them off don't feel the need to over tighten the exhaust stud it only needs be nipped in there it will naturally get more torque when you mount the header back on any way - hope this is help to you regards Jamie

May 23, 2011 | Harley Davidson FXDWG - FXDWGI Dyna Wide...

1 Answer

Torque spec on exhaust manifold for 2000 yukon xl

EXHAUST MANIFOLD BOLT TORQUE 2000 GMC Truck Yukon XL 1500 2WD 5.3L SFI 8cyl The Exhaust Manifold Bolt Torque

Exhaust manifold bolts (first pass) 11 Lb/Ft.Exhaust manifold bolts (final pass) 18 Lb/Ft.Exhaust manifold nuts 39 Lb/Ft.Exhaust manifold stud 16 Lb/Ft.Air injection reaction (AIR) Pipe to exhaust manifoldnuts 18 Lb/Ft.(AIR) Pipe to exhaust manifold studs 4 Lb/Ft.Exhaust manifold AIR pipe studs 4 Lb/Ft.Note:To torque bolts and nuts, start in center usingcrisscross pattern working outward.

May 07, 2011 | GMC Yukon XL Cars & Trucks

1 Answer

Replace exhaust maifold gasket on 2.0 liter, 140


Locate the exhaust manifold, there will be 8 bolts attaching it to the engine block. Remove these bolts, they may need penetrating fluid to loosen them. Slide the manifold off the exhaust studs.

Remove the gaskets, scrub where they have been with a wire brush and refit new ones. Use some gasket sealant to affix them and replace the manifold. Start at the middle studs and work outwards in a criss-cross formation.

Torque up the studs to the correct settings (check the manual) and don't overdo it as you could crack the cylinder head (been there done that).

Start the motor and check for any leaks around the manifold, if so, check gaskets again for a good seal then try again.

Hope this helps and please vote for me :)

Jul 12, 2010 | Boating

1 Answer

Broken exhaust bolt front not the one closest to frame how to fix

you will have to remove the exhaust from the head
if there is any of the stud left protruding from the head there is a tool that you can buy from your automotive spare parts dealer to remove the remaining stud
If no part of the stud is protruding you will have to drill a hole in the centre of the stud and use an easy-out to remove it, use some penetrating oil first to loosen any corrosion etc

Jul 09, 2010 | 2005 Harley Davidson FLHT - FLHTI Electra...

1 Answer

Head stud torque

cyl head torqes.1st stage 29 nm. 2 nd stage 57-67 nm. 3rd stage slacken off 360 cegrees, 4th stage 29 nm. 5th stage 64-74 nm. intake and exhaust valve clearance .38 mm hot setting. hope it goes ok.

Aug 14, 2009 | 1987 Nissan King Cab

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

38 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4898 Answers


Level 3 Expert

4349 Answers


Level 3 Expert

79865 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides