Question about Harley Davidson FLHRCI Road King Classic Motorcycles

1 Answer

Replaced battery but the solinoid just ticks the bike is 2006 road king custom

Posted by on

  • randy_barron Jun 18, 2009

    found the problem, it was not the solinoid but it is shorting out in the left handle bar contols, what do i need to do to stop this problem





    randy.barron@usar.army.mil

  • randy_barron Jun 18, 2009

    found the problem, it was not the solinoid but it is shorting out in the left handle bar contols, what do i need to do to stop this problem

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 948 Answers

Check the voltage at the solenoid. If you have a loose cable or broken wire somewhere, as you try to start the bike your voltage will drop below 10v while attempting to start.

Posted on Jun 17, 2009

  • Dick
    Dick Jun 18, 2009

    The only thing you can do is open the switch there and look. Odds are small it is repairable, most likely you'll have to replace it.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What causes back tire lean to the right?


does the bike handle correctly? Are your swing arm bushings worn or wheel bearings bad or is it adjusted improperly?

Jul 21, 2014 | 2006 Harley Davidson FLHRS Road King...

1 Answer

What is the axle size for an 2006 road king custom


Hi Anonymous, call, take a ride or trailer your bike over to your local dealers service/parts department, I'm sure they will be happy to take your Harley Davidson for a test ride if necessary/possible and offer professional advice and assistance concerning your issue. Good luck have a nice day.

Jul 31, 2012 | 2006 Harley Davidson FLHRSI Road King...

1 Answer

When riding a 2005 road king custom with a 95 cubic inch engine. The engine starts to stall or hesitates. Why is this?


if it happens when the bike gets hot it is your crank position sensor it is located by your oil filter

Sep 19, 2011 | 2006 Harley Davidson FLHR Road king

1 Answer

What battery do i fit to replace the old one on a 2005 Harley Davidson Road King Custom?


I'd recommend replacing with a Harley-Davidson AGM battery. They are very good batteries and competitively priced.

Good Luck
Steve

Jan 31, 2011 | 2005 Harley Davidson FLHRS - FLHRSI Road...

1 Answer

2005 FLHRS - FLHRSI Road King Custom: did the 05 road king classic come with or could be...


You could have the dealership install the 103 CI kit if you like but no it didnt come from the factory with that engine in it already, only the CVO bikes such as the FLHRSE and FLHRSEI came with the 103 CI motor installed from the factory.

May 16, 2010 | 2005 Harley Davidson FLHRS - FLHRSI Road...

1 Answer

Replaced battery, bike cranked, after riding 4 miles, just ticks


check battery leads (both ends) , Then make sure battery is charged 100% (verry important) Get out your (Digital) volt meter set it to DC volts Connect leads to the Battery, it should have at least 12.6 v , Watch meter and start engine, if meter drops below 10.0 volts your battery may be weak and will have to be replaced, or your starter is'nt mechanicaly efficient and will have to be fixed or replaced. While engine is running note voltage should be 12.6-13v volts, then rev engine to 3000 RPM , meter should read 13.5- 15 vdc. If not you have a problem with your stator or regulator/rectifier.

Jul 09, 2009 | 2006 Harley Davidson FLHR Road king

1 Answer

Left controls on hdl bar get hot, and wont start, just ticks


remove the controls and insulate the exposed wire from contact with the handle bar.

Jun 18, 2009 | 2006 Harley Davidson FLHR Road king

2 Answers

2006 Harley Davidson FLHR Road King


yes you should start it at least once weekly to maintain battery and keep engine lubricated, also it keeps fuel flowing through the bike. but dont just start up then switch off, make sure you get it up to normal operating temprature, this keeps moisture out of the engine oil.

Jan 28, 2009 | 2006 Harley Davidson FLHR Road king

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

140 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4521 Answers

Mike

Level 3 Expert

4340 Answers

yadayada
yadayada

Level 3 Expert

76132 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...