Question about 2008 Victory Vision Street

2 Answers

2008 Victory Vision transmision "rattles" in 4th and 6th.

This noise comes on when oil is at 200F. Also shifting gets somewhat "crunchy" and loud and clunky esp. down shifting. The bike has 6000 miles on it and oil & filter have been changed as per manual.

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Someone already mentioned to make sure you use Victory Oil & Filter. As for the noisy ******, yes that is what that year (2008-2009) trannys sound like in the Visions. (Sounds like one of my old Harley trannys)They have a new ****** for the 2010 up Visions; real smooth & quiet! As a point of additional info: watch the front gear-shift linkage for breakage at the point where it comes out of the front pivot point at the foot board mount closest to the engine!

Posted on Sep 30, 2011

Ad
  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 25 Answers

Are you using the Victory specified oil and filter?

Posted on Jun 16, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2004 Victory Kingpin Base noisy clutch at idle


Hi, Doug, I would love to help you with your engine or chassis noise but I just loaned my brand new pair of listening ears to your local dealer's chief technician so he could take your bike for a test ride and give you his professional opinion and estimate about your noise and repair cost. If you are a little short on "DRACHMA" and a Dealership is not on your list of fun places to visit then perhaps the list below will help soothe your worried mind so you can make an informed decision.
1. Bearings---SCREECH---WHINE
2. Belts---CHIRP
3. Brake Rotors---BUZZ
4. Cam Chains---CLICKIT
5. Clutches---CHATTER
6. Cylinders---PING
7. Fairing Panels---WHISTLE
8. Fenders---SCRAPE
9. Fronk Forks---Plunk
10. Fuel pumps---WHIRR
11. Gears---WHINE
12. Head Gasket---HISS
13. Hydraulic Lifters---TAP
14. Instrument Clusters---BUZZING
15. Kick Starter---GRINDS
16. Pistons---SLAP
17. Power Valves---CLINK& RATTLE
18. Radiators---GURGLE
19. Rear Chains---RATTLE
20. Rear Shocks---SQUEAK
21. Relays---CLICK&BUZZ
22. Shaft Drives---WHIRR
23. Shifting Trans---CLUNK
24. Solid Lifters---TICK
25. Speedometers---bzzz
26. Starters---CLICK
27. Rods Go---KNOCK-KNOCK---who's there, it's me "*****"
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
clutch basket noise Victory Forums Victory Motorcycle Forum Knocking Noise in Primary
03 05 Vegas KP Service Manual pdf
04 Kingpin parts manual pdf
2004 Victory Kingpin Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Jun 13, 2018 | 2004 Victory Kingpin Base

1 Answer

My 2011 victory vision is getting a whining noise through the speakers from the engine. Any ideas how to fix this??


check with them on autos u need noise suppression plug wires don't know about cycles sometimes its the ground to the radio or the ant.

Apr 29, 2016 | 2011 Victory Vision Tour

1 Answer

How and where do I install an xplod 10 cd changer in a 2008 victory vision tour and how difficult is it?


Not worth the extra weight or the time it takes and the space it takes up..why not go for a USB MP3 player ? cheap as chips and easy to fit and hold 5000 times more music

Dec 15, 2014 | 2008 Victory Vision Tour Premium

1 Answer

Clutch noise


You got it, Bad throw out bearing!

Apr 17, 2014 | 1993 Chevrolet Corvette

1 Answer

Loud clicking noise coming from engine when at high rpms. I have a stick. The noise happens just as I'm about to shift from 1st to 2nd, 2nd to 3rd, 3rd to 4th. Doesn't happen much in 4th gear or...


sounds like the rockers or lifters have some play due to wear.you don`t say what rpm you are shifting at other than high rpm.by changing the oil you have increased the viscosity of the oil as its new and not dirty and thin and cold oil is thicker than warm oil.you might want to try a heavier oil to see if it helps.you may not get this noise out unless you replace components or adjustment of rockers if they are adjustable.if its not very bad you may have to live with it.

May 09, 2011 | 2005 Ford Escape

1 Answer

2008 victory vision tour. getting harder to downshift. locked up twice in fourth going in to 3rd. Now applying alot of foot pressure on pedal to make bike shift. Any advice?


Hi Esvssimpat, for this situation I would call my local dealer or reputable shop's service department and inquire about any possible quick fix. If necessary transport your vehicle to the dealer or shop and have a professional technician take it for a test drive, if possible, and give you a written estimate of repairs and answer any specific questions you may have about your issue. Good luck and have a nice day.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Dec 13, 2010 | 2008 Victory Vision Street Tour

1 Answer

2006 R6 Shifting Problem


Howdy: The 3rd and 4th gears are used the most, after awhile the dog and shifting forks get worn more. Try changing to Yamaha Lube simi-syn oil 10/40. Drain oil after warm up (get trans oil warm). The oil is in a silver 4gal containe at the Yamaha dealer. This oil has helped me.
Good luck - Doug

Dec 09, 2009 | 2006 Yamaha YZF-R6

2 Answers

Oil change frequancy


There are several schools of thought on this. Some say you should change your oil every 3000 miles; others say every 6000 miles is fine. In any case, you should change it every 3 months.

Nov 10, 2008 | 2008 Victory Vision Street Premium

2 Answers

Amana Mod # ABB2223DEB Refrigerator


Try damper part number W10167268 from Whirlpool. They re-engineered the part, it's works different. Whirlpool issued a bulletin to servicers, but won't cover it under warranty (I have tried for many customers) "A bulletin is NOT a recall"

Jun 03, 2008 | Refrigerators

Not finding what you are looking for?
2008 Victory Vision Street Logo

573 people viewed this question

Ask a Question

Usually answered in minutes!

Top Victory Experts

Marvin
Marvin

Level 3 Expert

81285 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

5055 Answers

Joseph Hoffmann

Level 3 Expert

1746 Answers

Are you a Victory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...