I was riding, got off to open a gate and came back and the atv was off. i hit the start button and it didnt even click. the green neutral light wont come on either. the recoil starter will turn the motor over but wont fire. i checked the battery and it was charged, i checked the connections from the ignition and the were clean and tight.
had to list it under a motorcycle to post the problem
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Are you comfortably taking apart, cleaning and checking your carburetor? Got a lot of experience with the recons - cleaning that carb and checking it out is the #1 place I'd start. Here are your vacuum lines - for the TE TM - I can show you exactly how to tear down, check, set and put back together that carb or most of any other. Just let me know - Thanks, Justin M. 17 South Industries, LLC
2002 2003 2004 HONDA RECON TRX250TM TRX250TE CARB HOSE ROUTING - there's your routing - check all of the hoses first. If they're all fine - take the carb off. If you don't have the specs/tech info just let me know and I'll make sure you see how to do it by the book.
I have a 1999 Chrysler T&C 3.8 liter like yours and it sounds
like you are having the same the same problem I had.
Every time you hit the door unlock or lock button, it made a loud
buzz like you just missed a question on a game show. ;-)
It turned out the problem was the rear lift gate lock actuator. The part costs
about $40 from the dealer if I can recall correctly.
The repair involves: 1st removing the middle and rear seats to get
access from the inside to the rear gate
(obviously you will have to remove the seats from the side doors
since the rear gate won't open yet)
Remove the plastic inside rear gate panel and molding (phillips screws)
Once you remove the panel, you may see a way to manually
open the rear gate. As I recall, I think there was a access opening
covered from the inside with a black weather/insulation tape.
Carefully removing this out of the way gave access to a way to
manually open the gate, making the rest of the work easy.
Remove the electrical connector and the mounting bolts
to remove from the actuator. It is attached to the inside
rear gate with 2 or 3 bolts (10 mm?)
Remove the old one and replace the part, then put it all back
together, make sure you reconnect the electrical connector
Make sure you back up all songs on the GoGear before attempting this solution. 1) Back up all files on the GoGear 2) Open up Philips Device Manager (Start --> All Programs --> Philips) 3) Click on the Repair Tab, and look for a msg that says connect the player while holding the volume + button 4) Disconnect the GoGear from the computer and turn the GoGear off - hold in the volume + button and continue to hold it as you reconnect the GoGear to the computer; after holding the volume + button for up to 20 or 30 seconds, a window will open up saying that your device is being repaired (now you can let go of the volume + button); after the repair is successfully complete, your GoGear will be good as new Now you can do the firmware upgrade that will prevent this problem from occuring in the future. Open up Philips Device Manager and click the Update tab. This problem was caused because most GoGear's were designed for Windows XP with Media Player 10 (which is no longer the latest standard). -Tha Mp3 Doctor