Question about Yamaha YZ 250 Motorcycles

2 Answers

How do i ajuste the timing on a yz 250 1987...

Posted by on

  • tombones May 11, 2010

    You have a 1987 YZ250-WR, is that correct?

  • bozcro
    bozcro May 11, 2010

    does it have electronic ignition or points or magneto?

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,567 Answers

You have CDI ignition. The ignition timing can not be changed.

Please give a "very helpful" rating on this answer. Thanks :-)

Posted on Jun 15, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

The stator and flywheel each have a timing mark located on them, connect a timing light to the plug wire, pos/neg leads to a 12v power source (i use a battery jumper) loosen the stator plate, start bike, adjust plate carefully using timing light until marks are aligned. tighten everything up.

enjoy knowing that you did the job correctly and didn't listen to retards on the interwebs.

Posted on Aug 15, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a small alarm clock with model # alck-487 and three buttons M, S, D. i can't find the right combo of push and/ or hold to change the time. can you assist?


ALCK-487 reset time:
Press M three times, you will see the seconds flashing.
Then press S once to adjust minutes, press D,
press S a second time to adjust hours, press D,
press S a third time to adjust date of month, press D,
press S a fourth time to adjust month, press D,
press S a fifth time to adjust day of week, press D,
Then press M to end settings.

Mar 11, 2014 | Audio Players & Recorders

1 Answer

Ducati clutch cable ajustment


its either on the lever or the cable !

Dec 30, 2013 | 2002 Yamaha YZ 426 F

1 Answer

Hello i have a 2002 yz 125 and im lookin for the timing specs


Hi, Anonymous for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
YZ 125 Timing Need help
Yamaha YZ125 timing specs Google Search
YAMAHA YZ125 Owner Service Manual
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-yz-owners-manuals

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Aug 08, 2013 | 2004 Yamaha YZ 125

1 Answer

Ajustment on carburator


This is a sealed carb and no adjustment is needed or provided for except idle speed.

Jul 15, 2012 | 2003 Yamaha YZ 250

1 Answer

How to set the timing on a yz 450 f cams


Hi, Richard for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
need help yz 450 cam timing YZ 400 426 450
How to change timing chain and set timing on YZ450f
YAMAHA YZ450F Owner Service Manual
OEM parts for Yamaha
http://www.yamaha-motor.com/assets/service/manuals/2004/lit-11626-17-11_784.pdf

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


Apr 20, 2012 | 2003 Yamaha YZ 450 F

1 Answer

1988 yz125 air fuel mixture screws where are they as i can not see them anywhere.. and my bike will roll start but wont kick start and has alot of compression as i put a new wiesco racing piston kit in but...


all thats been set at the factory--only thing can ajust is idle speed--the jets or float level may hav issues and the magneto cud be weak at kick

Oct 04, 2011 | 2003 Yamaha YZ 125

1 Answer

How do i make my wr450run like a yz450


get some YZ cams, a yz exhaust and a yz ignition.and rejet to suit

It is possible to change the valve timinig by a tooth to get YZ valve timing.
and a grey wire can be removed from the ignition but these are only partial solutions

Jun 04, 2010 | 2005 Yamaha WR 450 F

3 Answers

It will not start and it backfire after valve adjustment. did i put the cams back the wrong way?


did u hav piston @tdc power stroke-valves shud slightly clic with ur hand after ajust-mite hav performed it at exhaust stroke! let me know

Jan 26, 2010 | 2002 Yamaha YZ 426 F

1 Answer

My yz250f need valve ajustment do you know what


Set the intake at .006 and the exhaust at .008. Set when engine is cold.

Jan 05, 2010 | 2003 Yamaha YZ 250

2 Answers

Yamaha yfs 200 blaster manual


You might find a free pdf service manual on this site, they have a ton of them.
http://www.carlsalter.com/motorcycle-manuals.asp

or try your local library. Often guys will donate manuals to the library.

Please rate this solution. Thanks wikusnagel!

Apr 06, 2009 | 2003 Yamaha YZ 250

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

535 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

Tom

Level 2 Expert

314 Answers

vince

Level 3 Expert

1216 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1165 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...