Question about 2011 Harley Davidson FLHX Street Glide

1 Answer

Harley fairing speakers

Trying to take farring apart to change speakers

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 24 Answers

There are 7 torx screws to remove and use a #27 torx head Turn the forks to one side and look from the tank side in on the buttom you will see one then turn the other way and you'll see the other buttom one then their are the other two almost inline with the levers and then the three for the windsheid. When you go to put it all back together only start them all first and then go back and tighten them.

Posted on Apr 05, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2010 flhx harley no power with ignition switch


Hi Anonymous, you may need an alarm reset, for more information about your question please visit the website below. Good luck and have nice day.
Set Change Override Transport Harley Security Alarm PIN Code No Key Fob...

Feb 09, 2013 | 2008 Harley Davidson FLHX Street Glide

1 Answer

How do i remove the inner fairing to fix a speaker


Hi Anonymous, for more information about your question please visit the websites below. Good luck and have nice day.
Uninstall remove Install replace front fairing speakers on Harley Davidson...

Jun 23, 2012 | 2000 Harley Davidson FLHT Electra Glide...

1 Answer

Boom audio, blown fuse


Fill the air with sound from this Boom!™ Audio Boom Bagger Kit. This complete audio kit provides the latest in Harley-Davidson® audio components. When installed, the increased power of the amplifier provides the speakers with a clean signal, and a custom equalization is available to further optimize the performance of the Boom!™ Audio speaker system.
  • 4-Speaker Ultra Boom!™ Bagger Kit
  • Ensure maximum output of your audio system with the recommended High Output Charging System P/N 29900028
  • Dealer Digital Technician software update is required
  • Dealer installation is recommended
  • Kit includes Boom!™ Audio 6.5" fairing speakers, Boom!™ Audio 4-channel fairing-mounted amplifier, amplifier mount and wiring harness
  • Speakers feature two-year warranty
  • Stop by a participating dealer to interact with a unique audio display that lets you simulate how your bike will sound with Boom!™ Audio upgrades. Contact your local dealer for details
From: http://www.harley-davidson.com/store/boom!-audio-boom-bagger-amp---speaker-kit-pa-08-76000411--1

Jun 11, 2012 | Harley Davidson Motorcycles

1 Answer

How do i replace speakers in road glide fairing


Hi Anonymous, for more information about your question please visit the websites below. Good luck and have nice day.
Uninstall remove Install replace front fairing speakers on Harley Davidson...

Feb 13, 2012 | 2004 Harley Davidson FLTRI Road Glide

1 Answer

I just recently purchased a 2007 flhx street glide. the front inner and outer fairing have been replaced. QUESTION. my oil pressure gauge just started bouncing all over the place as far as the pressure...


Some bikes with after-market fairings have sloppy workmanship when it comes to extending the wiring out to the fairing. You may be suffering from this condition. Open the fairing enough to check the wiring--when two wires are just twisted together and taped, they will not stay together. Try tugging at any joints you find to see if they pull apart easily. Crimped **** splices are best and don't need to be taped. Check the back of the gauge for loose connections as well. Hope this helps!

Sep 30, 2010 | 2008 Harley Davidson FLHX Street Glide

1 Answer

How to remove to replace speakers 05 electra glide classic


Hi Lynnhatcher, for more information about your question please visit the websites below. Good luck and have nice day.
Uninstall remove Install replace front fairing speakers on Harley Davidson...

Aug 07, 2010 | Harley Davidson FLHTC - FLHTCI Electra...

1 Answer

2003 Ultra. My radio and CD player speakers will only come on at half volume adjustment resulting in the speakers being to loud. When I adjust the speakers below 50% no volume is produced. .


Same thing happened to my bosses gold wing, we tore that thing apart, finally, found a fuse in line, buried deep in the guts of the fairing, it was blown, replaced it , the volume came back on no problem. The fuse wasn't even listed in the owner's manual. Check it out.

Jun 18, 2010 | 2003 Harley Davidson FLSTC Heritage...

1 Answer

Do I need to remove my fairing to replace the headling bulbs?


Hi there,

well you can please follow the below steps -

Remove the Fairing - 1. Unscrew all seven outer fairing fasteners using a Torx driver. These screws are located on the inner fairing near the windshield, the speakers, and the handlebar clamps.
2. Stand in front of the motorcycle. Tilt the outer fairing toward you and hold it firmly. Reach in and disconnect the wire connectors for the headlight assembly by hand.
3. Move the fairing to a work bench to continue the procedure.

Change the Headlights - 1. Remove the wire harness connectors from the back of each headlight that need replacement. Turn the plastic retainer counterclockwise by hand to remove each bulb from its housing.
2. Install the new headlight bulb or bulbs, with each bulb's wider ears on the bulb back plates oriented toward the top. Screw in the plastic retainer rings by hand.
3. Connect the headlight wire harness connectors to the back of each headlight.
4. Move the fairing back to the motorcycle. Reinstall the fairing, battery and seat in reverse order.
Please post comments if you need more help or information.........

Good Luck!!

Thanks

Mar 17, 2010 | 2004 Harley Davidson FLTRI Road Glide

1 Answer

Is there anything i should now about taking apart fairing


well pretty easy not to hard when you pull it leave front head light in just unplug from back of fairing

Oct 01, 2009 | Harley Davidson FLHX Street Glide...

1 Answer

On my 2003 ultra classic the left speaker on the fairing goes on and off and the right speaker sometimes pops and sometimes does nothing the speakers on the tour pack work fine. when i use the channel...


Check for loose wires on front speakers (remove faring, 7 screws). The popping one may be blown.
Try some electrical contact spray on the handle bars control switch, and then work the switch.

Aug 12, 2009 | Harley Davidson 426290 AM/FM Radio

Not finding what you are looking for?
2011 Harley Davidson FLHX Street Glide Logo

53 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Gills Lango

Level 2 Expert

195 Answers

Mike

Level 3 Expert

4336 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...