Question about 1997 Suzuki VS 800 Intruder
97 Suzuki intruder 800 backfires when leaving a stop sign.
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 1997 suzuki intruder 800
Sound like it's time to get the carbs looked at.
It wouuld seem your float is bad, stuck, or not properly adjusted,; thus causing too much fuel to enter the cylnder
Posted on Sep 11, 2009
Did you sync the two carbs? If not the rear may be getting all the gas from the rear carb and none to the front. Twist throttle engine off and see if front carb cable is pulling the carb open.
Also unscrew the spark plug boot from the front spark plug wire and trim 1/8th inch off the wire and screw the boot back in. The plug wire end may be corroded on that wire.
Posted on Feb 08, 2010
SOURCE: 1997 Suzuki intruder. Runs fine,
If the spark is there then the ignition is working well : the CDI is generating the spark correctly, at the right moment - you can't have a timing issue at only one cylinder. That cylinder overheats and starts to detonate the mixture because there are carbon and calamine deposits in the chamber - you will need to remove the head and clean it and the piston.
Posted on Sep 01, 2011
Tips for a great answer:
Apr 11, 2017 | 1997 Suzuki VS 800 Intruder
Dec 04, 2016 | 1996 Suzuki VS 800 Intruder
Apr 14, 2014 | 2001 Suzuki VS 800 Intruder
Sep 13, 2013 | 1996 Suzuki VS 800 Intruder
Oct 25, 2010 | 1996 Suzuki VS 800 Intruder
Apr 09, 2010 | 1996 Suzuki VS 1400 Intruder
Mar 06, 2018 | 2000 Suzuki VS 800 Intruder
Sep 11, 2009 | 1997 Suzuki VS 800 Intruder
Jun 01, 2009 | 1995 Suzuki VS 800 Intruder
Apr 02, 2009 | 1999 Suzuki VS 800 Intruder
293 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: