Question about 1993 kawasaki ZZR 600
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Hi and welcome to FixYa,
To my knowledge, there would only be 3 wires needed from the handlebars that affects the engine:
As to the ignition coil, 1 wire is IGN B+12 while the other would go to the CDI and should pulsate when cranking or engine running.
Good luck and thank you for using FixYa.
Posted on Feb 01, 2009
On your bike there are two clutch parts that can wear and cause this problem. The broken spring should be replaced but is not causing the problem. Check the bottom of the clutch release shaft #13102. The end of the shaft may be broken, bent or severely worn. The part the shaft engages with is the clutch rod #46102. It could be bent, broken or severely worn. This part is inside the clutch hub. Just remove the five springs and then the outer cover plate and the rod should be accessible.
Posted on Jul 24, 2009
Take riders seat off, undo small bolt in front of take. Will now lift up on rear hinge. Remove long bolt from rear hinge, remove fuel pipes and lift off.
Posted on Aug 12, 2009
Tips for a great answer:
Feb 16, 2017 | 1996 kawasaki ZX-9R Ninja
Aug 11, 2014 | 2000 Yoshimura-2001 Kawasaki Ninja ZX9R...
Jan 10, 2014 | kawasaki Ninja Zx7r Zx9r '94 To '04
Oct 20, 2012 | kawasaki Ninja Zx7r Zx9r '94 To '04
Aug 26, 2011 | kawasaki Ninja Zx7r Zx9r '94 To '04
Apr 29, 2011 | kawasaki Ninja Zx7r Zx9r '94 To '04
May 04, 2010 | 1994 kawasaki ZX-9R Ninja
Apr 18, 2010 | 2000 kawasaki ZX-9 R Ninja
Jun 09, 2009 | 1998 kawasaki ZX-9R Ninja
Aug 29, 2012 | 1993 kawasaki ZZR 600
112 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: