Question about Harley Davidson FLHR-FLHRI Road king Motorcycles

1 Answer

2005 FLH HAS AN P0113 CODE AND WILL NOT CLEAR

I TRIED TO CLEAR THEM WITH THE TRIP RESET BUTTON BUT IT WONT CLEAR

Posted by Anonymous on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Harley Davidson Master
  • 40,840 Answers

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to reset the change oil light on a 1997 rav4


rav4 reset maintenance light
pretty standard
hold trip A in with engine and key off while holding trip button in turn key and engine on.
keep holding trip button in until light stops flashing when it stops flashing then release the trip reset button this should clear the maintenance warning light. hope this helps

Dec 26, 2014 | 1997 Toyota RAV4

1 Answer

2002 honda cr v select/reset button broken


replace it, its bad.
( as speedo shop can fix it at 2 times new. ?)

Jan 21, 2014 | 2002 Honda CR-V

1 Answer

How to reset trip meter to zero for every journey on jaguar s type and also where the button to reset is please?


The two buttons that control the trip options are on the dash adjacent to the hazard warning button. Press the TRIP button untill it shows a small A or B in the top left (say average mpg) then press the upper part of the toggle switch marked RESET/CLEAR and hold it for about four seconds, this will display A or " B resetting" depending on which trip you are currently in, then everything on that trip is reset to zero (mileage/mpg/ave.speed etc). I use A for the full tank recording and B for individual journeys that I wish to record.

Jul 21, 2011 | 2000 Jaguar S-Type

1 Answer

How do I turn the Maintenance warning light on my 2020 Nissan Murano? I tried the manual indications to no avail. Thanks in advance. Leo


1. Turn your ignition switch on.
2. Press the Trip Computer switch until "Maintenance" is displayed. The trip computer button is located above the "Trip Reset" button and has a square graphic printed on it.
3. Press the "Select" button to enter the "Maintenance" menu. The "Select" button is above the "Trip Reset" button and has a circle graphic on it.
4. Press and hold the "Trip Reset" button for about 10 seconds until the maintenance reminder resets.


  • Apr 03, 2011 | 2009 Nissan Murano

    1 Answer

    I had my oil changed in October after the "oil


    Try this procedure and let me know if this does not work;

    Turn the ignition switch to the "On" position but do not start the engine.

    1. Press the Trip/Reset button until "Setup Menu Hold Reset" is displayed.

    2. Then press and hold down the Trip/Reset button for approximately 2 seconds until "Reset For System Check" is displayed then release the Trip/Reset button.

    3. Then immediately press and hold down the Trip/Reset button again for approximately 2 more seconds until "OIL 100% RESET IF NEW" is displayed then release the Trip/Reset button.

    4. Then immediately press the Trip/Reset button once to display "HOLD RESET IF NEW OIL" then release the Trip/Reset button.

    5. Then immediately press and hold the Trip/Reset button again for approximately 2 seconds until "OIL LIFE SET TO 100%" is displayed.

    Turn off the ignition switch, and then start the engine to verify that the reset procedure did work, and you might have to repeat the procedure if the Trip/Reset button is not pushed fast enough, or it is not held down long enough, or it is held down too long during the reset procedure, and it may take a few attempts to be successful.

    Nov 11, 2010 | 2006 Ford Explorer

    1 Answer

    How do you clear the service light on a S60 T5 2003. Please can you help.


    Ensure all doors are closed.Turn ignition key to position 1.Press and hold reset button on a dashboard left hand side down/instrument panel/.Immediately turn ign.key to position 2.Keep reset button depresed until trip meter is reset to 0. NOTE:IF trip meter has already been reset.Hold reset button for 10-14 secondsuntil previous trip meter reading is shown.Press and hold reset button until trip meter is reset to 0 ;;;; Release a button within 4 secondsThere will be an audible signal When reset complete.

    Nov 28, 2009 | Volvo S60 Cars & Trucks

    1 Answer

    On a 2008 Lexus LS350 the oil light was not reset after an oil change. It does not have a key. I tried using the "hold tripodometer and pressing he start button with my foot off the brake" - no good!


    Turn ignition on, press trip button till you see trip A. Turn ignition off, press the trip button and turn the ignition on while you hold the trip button, once the 5 dashes flash away it will reset.

    Nov 17, 2009 | 2008 Lexus Rx 350

    1 Answer

    I have a 2004 Volvo S60. How can I clear the "Time for Regular Service" message. I service my own car.


    Close all doors.Turn ignition key to position 1.PRESS AND HOLD trip reset button,immediately turn ignition to position2,keep trip button held untill trip is reset to 0.A yellow warning light will show when it is time to release trip button.Release within 4seconds ,a bleep will be confirm reset.Before you start reset, do not reset trip,If trip has been reset to 0,turn ignition to position 2 hold reset for 10- 15 secs untill previous reading is shown,then start reset.

    Oct 31, 2009 | 2005 Volvo S60

    2 Answers

    2004 Nissan Murano How do you clear maintenance light after oil change?


    press maintanence button until you see engine oil, then hold trip/reset button... :)

    Oct 03, 2008 | 2004 Nissan Murano

    1 Answer

    Service req light wont turn off


    You have to press the trip button until you come to the actual odometer and not the trip A and Trip B. Once your on the actual odometer screen press and hold the trip button down while at the same time turning off the engine. Then wait for a few seconds to clear. Then while still holding the trip button down turn on the ignition. The odometer will reset to all zeros and flash a few times then the maintenance light will go away.

    Jul 21, 2008 | 2006 Scion xA

    Not finding what you are looking for?
    Motorcycles Logo

    Related Topics:

    111 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Harley Davidson Experts

    Arnie Burke
    Arnie Burke

    Level 3 Expert

    4514 Answers

    Gills Lango

    Level 2 Expert

    195 Answers

    Mike

    Level 3 Expert

    4336 Answers

    Are you a Harley Davidson Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...