Question about 2011 Derbi Senda DRD Pro 50 SM

1 Answer

My derbi wont start at all, no matter what i try...

My derbi wont start no matter i kick or jumpstart it. it worked before the winter and now it is leaking gas too. please help me out

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Derbi Master
  • 40,760 Answers

Hi, Tage and the usual suspects are:
1. Fuel tank empty.
2. Fuel supply valve/petcock turned off.
3. Fouled spark plugs.
4. Engine flooded as a result of overuse of the enricher.
5. Vacuum hose to the fuel supply valve/petcock disconnected, broken, cracked, or pinched.
6. Fuel valve/petcock or filter clogged.
7. Discharged battery, check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
8. Loose or corroded wire connection at the coil, battery or plug between ignition sensor and module.
9. Spark plug cables in bad condition and shorting, cable connections loose, or connected to the wrong cylinders.
10. Ignition timing incorrect due to a faulty ignition coil, ignition module or sensors (MAP, CMP, CKP, O2 and/or BAS).
11. Security alarm needs a reset.
For more information about your issue and valuable free downloads that you will need please visit the websites below. Good luck and have a nice day.
Derbi Senda DRD PRO 50CC Hard to start
My 50cc Derbi senda sm xtreme cuts out when get it running why
Derbi service manuals page 1
https://www.oemmotorparts.com/oem2.asp?M=derbi
http://www.derbi.com/fr/images/stories/modelos/37/manual.pdf

Posted on Mar 02, 2016

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 16 Answers

SOURCE: help. my sons derbi send r 125 wont start. all

have you checked your air filter. If its dirty wash out with air filter cleaner or petrol and replace.

Posted on Feb 21, 2009

  • 3567 Answers

SOURCE: Kick start for Derbi GPR

No kick start is availabe as an add-on. You will need to install a new battery.

Posted on Aug 09, 2009

  • 5370 Answers

SOURCE: i have a derbi senda r xtreme 50cc, it only starts

Sometimes it stats and runs, this clears that there is actually, not the problem.But suddenly it will not star, his indicates problem with connections, either something i getting loose or short. You need to test h voltage to battery,stator[voltage regulator] and starter when you face this no start problem. IF all this parts show correct voltage, then inspect fuel pp n spark plug voltages.IF that also checked ok,then get the,ignition system checked, ignition start switch is getting Short and check compression for ignition cylinders ,if compression differs on any cylinder then that is the problem and needs to be replaced.-------- Getting, this possibilities checked will help.Thanks.Helpmech.

Posted on Aug 14, 2011

paul4_judith
  • 1190 Answers

SOURCE: my derbi wont start at all, no matter what i try...

remove carb and clean the jets etc and replace the fuel as it will be bad !! new plug be good !

Posted on Mar 29, 2014

Testimonial: "I have cleaned the carb and the air filter. new gas and the spark plug works. Everything is looks fine but i cant start it..."

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does my Derbi adventure 125 take forever to start?


Hi, Anonymous and the usual suspects are:
1. Spark plugs in bad condition or have an improper gap or are partially fouled.
2. Spark plug cables in bad condition.
3. Battery nearly discharged, should have 12.5 volts.
4. Discharged battery, check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
5. Throttle controls not adjusted correctly.
6. Water or dirt in the fuel system.
7. Water or dirt in the carburetor.*
8. Intake air leak.
9. Fuel tank vent hose and vapor valve plugged, or fuel line closed off, restricting fuel flow.*
10. Enricher valve inoperative.*
11. Engine lubricant to heavy (winter operation).
12. Ignition is not functioning properly (possible sensor failure).
13. Faulty ignition coil.
14. Valves sticking.
* Carbureted models.
For more information about your issue and valuable "FREE" downloads that you will need please visit the websites below. Good luck and have a nice day.
Derbi GPR50 starting problems
Derbi Gpr 125 4T problems
Derbi GP1 125 250 Workshop Manual
https://www.oemmotorparts.com/oem2.asp?M=Derbi
http://www.derbi.com/fr/images/stories/modelos/37/manual.pdf

May 26, 2014 | 2007 Derbi Senda Baja 125 R

1 Answer

Derbi adventure takes ages to start


Hi, Anonymous and the usual suspects are:
1. Spark plugs in bad condition or have an improper gap or are partially fouled.
2. Spark plug cables in bad condition.
3. Battery nearly discharged, should have 12.5 volts.
4. Discharged battery, check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
5. Throttle controls not adjusted correctly.
6. Water or dirt in the fuel system.
7. Water or dirt in the carburetor.*
8. Intake air leak.
9. Fuel tank vent hose and vapor valve plugged, or fuel line closed off, restricting fuel flow.*
10. Enricher valve inoperative.*
11. Engine lubricant to heavy (winter operation).
12. Ignition is not functioning properly (possible sensor failure).
13. Faulty ignition coil.
14. Valves sticking.
* Carbureted models.
For more information about your issue and valuable "FREE" downloads that you will need please visit the websites below. Good luck and have a nice day.
http://www.singaporebikes.com/forums/archive/index.php/t-214832-p-2.html
Derbi Gpr 125 4T problems
Derbi GPR 125 Racing Workshop Manual
https://www.oemmotorparts.com/oem2.asp?M=Derbi
http://www.derbi.com/fr/images/stories/modelos/37/manual.pdf

May 26, 2014 | 2011 Derbi Mulhacen 125

1 Answer

Derbi adventure125 wont start


Hi, Anonymous and the usual suspects are:
1. Spark plugs in bad condition or have an improper gap or are partially fouled.
2. Spark plug cables in bad condition.
3. Battery nearly discharged, should have 12.5 volts.
4. Discharged battery, check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
5. Throttle controls not adjusted correctly.
6. Water or dirt in the fuel system.
7. Water or dirt in the carburetor.*
8. Intake air leak.
9. Fuel tank vent hose and vapor valve plugged, or fuel line closed off, restricting fuel flow.*
10. Enricher valve inoperative.*
11. Engine lubricant to heavy (winter operation).
12. Ignition is not functioning properly (possible sensor failure).
13. Faulty ignition coil.
14. Valves sticking.
* Carbureted models.
For more information about your issue and valuable "FREE" downloads that you will need please visit the websites below. Good luck and have a nice day.
Hard Cold start on the Derbi 125cc
DERBI SENDA TERRA 2008 JUST ADJUSTED THE IDLE COLD START
Derbi GP1 125 250 Workshop Manual
https://www.oemmotorparts.com/oem2.asp?M=Derbi
http://www.derbi.com/fr/images/stories/modelos/37/manual.pdf

May 26, 2014 | 2011 Derbi Terra Adventure 125

1 Answer

My derbi wont start at all, no matter what i try...


remove carb and clean the jets etc and replace the fuel as it will be bad !! new plug be good !

Mar 29, 2014 | 2011 Derbi Senda DRD Pro 50 SM

1 Answer

Wont start


Hi, Tage and the usual suspects are:
1. Fuel tank empty.
2. Fuel supply valve/petcock turned off.
3. Fouled spark plugs.
4. Engine flooded as a result of overuse of the enricher.
5. Vacuum hose to the fuel supply valve/petcock disconnected, broken, cracked, or pinched.
6. Fuel valve/petcock or filter clogged.
7. Discharged battery, check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
8. Loose or corroded wire connection at the coil, battery or plug between ignition sensor and module.
9. Spark plug cables in bad condition and shorting, cable connections loose, or connected to the wrong cylinders.
10. Ignition timing incorrect due to a faulty ignition coil, ignition module or sensors (MAP, CMP, CKP, O2 and/or BAS).
11. Security alarm needs a reset.
For more information about your issue and valuable "FREE" downloads that you will need please visit the websites below. Good luck and have a nice day.
Derbi Senda DRD PRO 50CC Hard to start
Derbi Senda 50cc got spark compression and fuel wont run
https://scootergrisen.dk/scooterhjemmeside/download/derbi_gp1_servicemanual.pdf
https://www.oemmotorparts.com/oem2.asp?M=Derbi
http://www.derbi.com/fr/images/stories/modelos/37/manual.pdf

Mar 29, 2014 | 2011 Derbi Senda DRD Pro 50 SM

1 Answer

2000 yamaha yz426 wont start and gas is leaking out


Hi, Anonymous and the usual suspects are:
1. Enrichner system plugged, not properly functioning or improperly operated.
2. Fuel overflow.
3. Restricted fuel supply.
4. Gas cap and or fuel tank not venting properly.
5. Plugged slow jet or passages.
6. Inlet system air leak.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
99 YZ400F Leaking Carb Hard to start YZ 400 426 450
2001 yz426 carb problem need help
Yamaha YZ426F Owner Service Manual
OEM parts for Yamaha
Yamaha YZ450F Owner Manual Page 3

Sep 13, 2012 | 2001 Yamaha YZ 426 F

1 Answer

Derbi Senda Xtreme wont start any ideas please???


check your spark plug to see if you have a spark if not check your spark plug cap to see if that id the reason and if its not that check your ht lead dowt it will be that but its possible then check your coil to see if theres any power coming from that .
2nd... you might be starving it from petrol remove your carb and clean it all out remove your jets and blow them to get a dirt out that is in them , then remove your petrol pipes and clean them out to prevent any blockege

May 21, 2012 | 2006 Derbi Senda XTreme 50 R

1 Answer

Fitting back kick start spring mechanism derbi senda drd rro 50


Hi I have a derbi senda sm 2005 Just brought a kickstart shaft but carnt rember how to fit it n how the springs go If any1 can help please let me no

Oct 14, 2009 | 2004 Derbi Senda R 125 4T

1 Answer

Kick start for Derbi GPR


No kick start is availabe as an add-on. You will need to install a new battery.

Aug 09, 2009 | 2005 Derbi GPR 125 Racing

Not finding what you are looking for?
2011 Derbi Senda DRD Pro 50 SM Logo

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top Derbi Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

ARNE ERIKSSON

Level 2 Expert

204 Answers

Are you a Derbi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...