Question about 2011 Gilera Fuoco 500ie

1 Answer

Nothing on starter button battery all ok

Nothing on starter button battery fine every thing ok lights hooter, ignition, brake lights, fuses

Posted by Anonymous on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 44 Answers

I had an intermittent starting problem with my Piaggio MP3 which turned out to be water ingress and some "corrosion" inside the ENGINE STOP SWITCH
Nothing on starter button battery all ok - 51fe08b5-13bf-4f61-96e8-e3d020b4de60.jpg

It's very easy to get at, fairly easy to disconnect from the wiring loom connector and then remove from the handlebar shroud, and not too difficult to open it up and get inside.
It's then simple to dry and clean up any contact metal surfaces that look dirty or "corroded".
I used several cotton buds and some isopropyl alcohol

You can get a very soft abrasive "eraser" specially designed to remove oxidation from PCB edge connectors which would also do a fine job of cleaning up these contacts

Once cleaned I applied a little bit of petroleum jelly to both help protect the electrical contacts and repel water

Then just reverse the processes.

Mine's been OK ever since

Posted on Apr 03, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2008 jeep wrangler, no power to ignition or accessories, after replacing starter.


Take it to a shop. U fu--ed up royally doing the swap. If you had done the job correctly you would not be having this problem. Decent thing to do at this juncture is help your buddy pay for the correct repairs.

Apr 15, 2017 | Jeep Cars & Trucks

3 Answers

I just purchased 1198 Nissan frontier. I had to replace the battery right away. And after installing a new battery. I turn the key and nothing. No dash lights. No buzzers or clicks. nothing comes on. No...


use a test light and follow the main supply wires going into the cars cab keep poking thru the insulation with the tester probe at regular intervals until you dont get any power. there might be a fusable link or a maxifuse somewhere blown. check fuse panel for pwoer and check the wires to and from the ignition switch.

Sep 23, 2010 | Nissan Frontier Cars & Trucks

1 Answer

No ignition lights all fuses found are ok, main fuse by battery ok and fuses on pod ok,are there any more fuses at all?


Your ignition switch has a replaceable contact base .The problem is probably dirt on the contacts. If your careful you can remove the switch, take off the base, and clean the contacts. You can remove the base cover by turning the switch to the on position and gently pushing the three tabs in. Then carefully disassemble noting where all the pieces go. If this does not work and the switch is bad you should be able to buy a new one at the local Honda dealer. The only other thing that turns off lights is the two position switch (starter button) it first turns off lights (halfway in) then it turns on starter. If starter button is the problem then ,if you cant clean or fix, you have to replace the assembly.

Jun 20, 2010 | 1982 Honda GL 1100 Gold Wing

1 Answer

1500 Ram wont start, no crank no click nothing. Air cond and dash lights work just fine just wont start. Battery is ok tried to jump, no luck, put in different battery no luck.


First thing is to check is the ignition fuse/relay under the hood for a blown fuse or bad relay. If everything is ok then set parking brake with truck in park/netural and have someone to turn the ignition over to start and at the same time use a test light to check for fire at the starter solenoid. If no fire then the ignition switch or netural switch on transmission is causing the problem. If you do have power to the starter solenoid then the problem would be either the solenoid or the starter drive locked up on the flywheel. Be sure to remove the negative wire from the battery if you need to remove the starter. Hope this will help you.

Jun 02, 2010 | 2008 Dodge Ram 1500 2WD

2 Answers

Starter


You need to check and see if when you turn the key to start that you get current at the starter soldnoid. If not check the safty switch and the ignition switch. If you get current check and see if it goes thru to the starter if not replace soldnoid if it does check the starter itself. These are all electrical and can fail at any time without any warning. Good luck.

Nov 17, 2009 | 2006 Ford F-150

2 Answers

Starting fault


There are two safety switches that you may need to test. 1) Neutral safety switch- this switch is what tells the bike that it's in neutral and allows the starter to engage. 2) Kickstand safety switch- this switch will not allow the bike to run in gear if the kickstand is down. My initial guess is the neutral safety switch. If the neutral safety switch is bad, then you will not be able to start the bike with the kickstand down because the bike thinks that it's in gear (even if in neutral). This also may explain why the initial intermitent problem of not starting when warm since the metal contacts will expand and possibly not make contact when warmed up. Are you trying to start the bike with the kickstand up or down? If it were the kickstand safety switch, the bike would probably start okay and then die when you put it in gear.

Oct 10, 2009 | 1995 kawasaki ZZR 1100

1 Answer

Cannot diagnose source of electrical fault


TRY A TO BYPASS ALL SYSTEMS WITH A POSITIVE LEAD SHOULD WORK BUT YOU NEED AT LEAST 9VOLTS TO GET THE IGNITER TO EVEN THINK ABOUT LETTING THE COILS HAVE ANY POWER TO EXPLODE THE GAP POINT OF YOU'RE SPARK PLUGS SO GOOD LUCK

Jun 14, 2009 | 1997 Yamaha XVS 650 Dragstar

2 Answers

My 1996 dodge stratus es wont start!


sounds like the starter here is why....
fuse blows in the under hood fuse block because the draw is to high to the starter. I got lucky and changed to a higher amp fuse to start the car to get in to my garage..... DO THIS ONLY ONCE AS HIGH CURENT IS NOT THE FIX,

May 25, 2009 | 1996 Dodge Stratus

1 Answer

I can not start my Honda Goldwing 89 1500 Trike


Hi it sounds like the starter solinoid or starter relay is not working or there could be a loose wire or the starter motor is faulty

Nov 22, 2008 | 1989 Honda GL 1500 Gold Wing

Not finding what you are looking for?
2011 Gilera Fuoco 500ie Logo

119 people viewed this question

Ask a Question

Usually answered in minutes!

Top Gilera Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

Fabrice Wolters

Level 2 Expert

321 Answers

Are you a Gilera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...