Question about 2011 Derbi Senda DRD Pro 50 SM

1 Answer

My derbi wont start at all, no matter what i try...

My derbi wont start no matter i kick or jumpstart it. it worked before the winter and now it is leaking gas too. please help me out

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Renaissance:

    An user who is expert in 3 categories / brands.

  • Derbi Master
  • 1,190 Answers

Remove carb and clean the jets etc and replace the fuel as it will be bad !! new plug be good !

Posted on Mar 29, 2014

Testimonial: "I have cleaned the carb and the air filter. new gas and the spark plug works. Everything is looks fine but i cant start it..."

  • 2 more comments 
  • Tage Solvberg
    Tage Solvberg Mar 30, 2014

    and my gas was yellow.. oil. is it suppose to be like that?

  • paul
    paul Mar 30, 2014

    fuel can be yellow , blue , green ! put a small drop of your fuel in a clean cup and light it carefully ! if you cant light it then its bad or its diesl fuel ! Quick fuel test !!!

  • Tage Solvberg
    Tage Solvberg Mar 30, 2014

    i did what u said an it lit up, but quickly stops burning.. and i cleaned the carb and the air filter. new gas and the spark plug works. Everything is looks fine but i cant start it...

  • Tage Solvberg
    Tage Solvberg Mar 30, 2014

    an i know there is oil in there, i could taste it when i drained the tak.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Derbi adventure takes ages to start


Hi, Anonymous and the usual suspects are:
1. Spark plugs in bad condition or have an improper gap or are partially fouled.
2. Spark plug cables in bad condition.
3. Battery nearly discharged, should have 12.5 volts.
4. Discharged battery, check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
5. Throttle controls not adjusted correctly.
6. Water or dirt in the fuel system.
7. Water or dirt in the carburetor.*
8. Intake air leak.
9. Fuel tank vent hose and vapor valve plugged, or fuel line closed off, restricting fuel flow.*
10. Enricher valve inoperative.*
11. Engine lubricant to heavy (winter operation).
12. Ignition is not functioning properly (possible sensor failure).
13. Faulty ignition coil.
14. Valves sticking.
* Carbureted models.
For more information about your issue and valuable "FREE" downloads that you will need please visit the websites below. Good luck and have a nice day.
http://www.singaporebikes.com/forums/archive/index.php/t-214832-p-2.html
Derbi Gpr 125 4T problems
Derbi GPR 125 Racing Workshop Manual
https://www.oemmotorparts.com/oem2.asp?M=Derbi
http://www.derbi.com/fr/images/stories/modelos/37/manual.pdf

May 26, 2014 | 2011 Derbi Mulhacen 125

1 Answer

Derbi adventure125 wont start


Hi, Anonymous and the usual suspects are:
1. Spark plugs in bad condition or have an improper gap or are partially fouled.
2. Spark plug cables in bad condition.
3. Battery nearly discharged, should have 12.5 volts.
4. Discharged battery, check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
5. Throttle controls not adjusted correctly.
6. Water or dirt in the fuel system.
7. Water or dirt in the carburetor.*
8. Intake air leak.
9. Fuel tank vent hose and vapor valve plugged, or fuel line closed off, restricting fuel flow.*
10. Enricher valve inoperative.*
11. Engine lubricant to heavy (winter operation).
12. Ignition is not functioning properly (possible sensor failure).
13. Faulty ignition coil.
14. Valves sticking.
* Carbureted models.
For more information about your issue and valuable "FREE" downloads that you will need please visit the websites below. Good luck and have a nice day.
Hard Cold start on the Derbi 125cc
DERBI SENDA TERRA 2008 JUST ADJUSTED THE IDLE COLD START
Derbi GP1 125 250 Workshop Manual
https://www.oemmotorparts.com/oem2.asp?M=Derbi
http://www.derbi.com/fr/images/stories/modelos/37/manual.pdf

May 26, 2014 | 2011 Derbi Terra Adventure 125

1 Answer

My derbi wont start at all, no matter what i try...


Hi, Tage and the usual suspects are:
1. Fuel tank empty.
2. Fuel supply valve/petcock turned off.
3. Fouled spark plugs.
4. Engine flooded as a result of overuse of the enricher.
5. Vacuum hose to the fuel supply valve/petcock disconnected, broken, cracked, or pinched.
6. Fuel valve/petcock or filter clogged.
7. Discharged battery, check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
8. Loose or corroded wire connection at the coil, battery or plug between ignition sensor and module.
9. Spark plug cables in bad condition and shorting, cable connections loose, or connected to the wrong cylinders.
10. Ignition timing incorrect due to a faulty ignition coil, ignition module or sensors (MAP, CMP, CKP, O2 and/or BAS).
11. Security alarm needs a reset.
For more information about your issue and valuable free downloads that you will need please visit the websites below. Good luck and have a nice day.
Derbi Senda DRD PRO 50CC Hard to start
My 50cc Derbi senda sm xtreme cuts out when get it running why
Derbi service manuals page 1
https://www.oemmotorparts.com/oem2.asp?M=derbi
http://www.derbi.com/fr/images/stories/modelos/37/manual.pdf

Mar 29, 2014 | 2011 Derbi Senda DRD Pro 50 SM

1 Answer

Wont start


Hi, Tage and the usual suspects are:
1. Fuel tank empty.
2. Fuel supply valve/petcock turned off.
3. Fouled spark plugs.
4. Engine flooded as a result of overuse of the enricher.
5. Vacuum hose to the fuel supply valve/petcock disconnected, broken, cracked, or pinched.
6. Fuel valve/petcock or filter clogged.
7. Discharged battery, check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
8. Loose or corroded wire connection at the coil, battery or plug between ignition sensor and module.
9. Spark plug cables in bad condition and shorting, cable connections loose, or connected to the wrong cylinders.
10. Ignition timing incorrect due to a faulty ignition coil, ignition module or sensors (MAP, CMP, CKP, O2 and/or BAS).
11. Security alarm needs a reset.
For more information about your issue and valuable "FREE" downloads that you will need please visit the websites below. Good luck and have a nice day.
Derbi Senda DRD PRO 50CC Hard to start
Derbi Senda 50cc got spark compression and fuel wont run
https://scootergrisen.dk/scooterhjemmeside/download/derbi_gp1_servicemanual.pdf
https://www.oemmotorparts.com/oem2.asp?M=Derbi
http://www.derbi.com/fr/images/stories/modelos/37/manual.pdf

Mar 29, 2014 | 2011 Derbi Senda DRD Pro 50 SM

1 Answer

Honda scooter push button wont work only if kick start


it may have dirty cotacts on push button pull apart ad clea cotacts and check spring

Apr 12, 2013 | 2006 Derbi Atlantis City 100

1 Answer

60 plate gp1 open fitted new battery wont start only on kick no indicators


check you earth cable connections for corrosion, esp around solonoid, check for damaged wires at rectifier

Mar 14, 2013 | 2009 Derbi GP1 50 Open

1 Answer

Derbi Senda Xtreme wont start any ideas please???


check your spark plug to see if you have a spark if not check your spark plug cap to see if that id the reason and if its not that check your ht lead dowt it will be that but its possible then check your coil to see if theres any power coming from that .
2nd... you might be starving it from petrol remove your carb and clean it all out remove your jets and blow them to get a dirt out that is in them , then remove your petrol pipes and clean them out to prevent any blockege

May 21, 2012 | 2006 Derbi Senda XTreme 50 R

1 Answer

Kick start for Derbi GPR


No kick start is availabe as an add-on. You will need to install a new battery.

Aug 09, 2009 | 2005 Derbi GPR 125 Racing

1 Answer

Wont start


How is the stator plate and coil? Do you have a new plug in? Are you getting fuel to the carb?

May 25, 2009 | 2004 kawasaki VN 1500 Vulcan Classic

Not finding what you are looking for?
2011 Derbi Senda DRD Pro 50 SM Logo

Related Topics:

226 people viewed this question

Ask a Question

Usually answered in minutes!

Top Derbi Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Derbi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...