Question about Triumph Tiger Motorcycles

Open Question

Resetting service light

How to reset service remaining

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sharp Aquos TV


Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts.
http://electronicshelponline.blogspot.com/
In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.
Before going further; try a hard reset first. If it does not help you, replace the main digital board. There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; visit the site linked here. ..

Aug 06, 2016 | Sharp Televison & Video

2 Answers

Why does a wrench sign appears on the dashboard


Wrench light is a service due light and comes on every 10,000 klms. To reset light hold trip meter reset button in and turn on ignition whilst remaining hold on button for approx 10 seconds. spanner light will go out

Nov 24, 2012 | 2007 Ford Explorer Sport Trac

1 Answer

Reset the service light after oil change on a 2007 BMW 750Li


BMW insp. reset

- Iginition OFF (POS 0)

- Press and Hold the trip odometer button while turning key to position 1 (ACCESSORY)

- Keep the button depressed (about 5 secs.) until you see "Oil Service" or "Inspection" with "Reset" or "Re" in the display

- *Note: On vehicles with "High" cluster, you will also see the amount of fuel (in litres) remaining until next service

- Press the button again and hold for approx. 5 secs. until "Reset" or "Re" flashes

- While the display is flashing, briefly press the button again to reset the Service Interval. After the display has shown the new interval you should see "END SIA" for about 2 secs.

Note that if the "Reset" or "Re" does not flash, then you have not met the minimum consumption level and cannot reset.

May 31, 2011 | BMW 750 Cars & Trucks

1 Answer

I have just done my oil and filter service in the garage. The mechanic forgot to reset the service light. I did it myself acc to this forum suggestions. However, when I check the remaining km status on the...


TO RESET, MOST VEHICLES TURN ON THE IGNITION SWITCH, [DO NOT START THE ENGINE ] PRESS THE GAS PEDAL TO THE FLOOR 3 TIMES, THE LIGHT SHOULD GO OUT. IF THAT DOESN'T WORK, YOU CAN DISCONNECT THE NEG. BATTERY CABLE FOR A MINUTE THEN RECONNECT, START THE ENGINE, THE LIGHT SHOULD BE OUT

Dec 25, 2010 | 2006 Audi A4

1 Answer

Reset coolant level light in a chevy impala 2002 and reset the airbag light too,,, please


COOLANT LEVEL ON MESSAGE CENTER COMES ON, WHEN CAR REACHES CERTAIN TEMP. GOES AWAY. SERVICE ENGINE SOON ON MESSAGE CENTER REMAINS ON

Oct 10, 2010 | 2002 Chevrolet Impala

1 Answer

How do you reset the service warning light on a Sportcity 250


Hi,
When the vehicle is started and right after the ignition check, if there are less than 300 km (200 mi) left
to the next Service, the specific icon flashes for 5 seconds. Once the service mileage has been reached,
the icon remains steadily until the Service is reset.
The warning light can be zero set even if the mileage is lower, up to 300 km (200 mi), compared with
the Service mileage. During the 300 km (200 mi) before the service warning light comes on, the light
flashes 5 times each time the key is set to ''ON''.
The light should turn on first at 1000 km (625 mi). Successive times are strictly at 10000 km (6215 mi)
20000 km (12430 mi), etc
RESET
Hold the MODE button down.
Turn the key to ''ON'' and wait 10 seconds.
During this operation the service icon flashes.
Good luck,
Alex
PS-Don't forget to vote me, thanks!

May 07, 2010 | 2007 Aprilia Sportcity 250

2 Answers

How to resit service light on VW passatt 1.8T 2002


Try removing the negative and positive lead on the battery for fifteen seconds. Then, hold the contacts together for 10 seconds and then reinstall them. Next, leave the driver's side door OPEN and turn the ignition switch to ON (but DO NOT start the car) and let it remain there for 30 seconds. This should reset the check engine light.

Feb 22, 2010 | Supersonic Car Audio & Video

2 Answers

Hilti 76 p atc


Hi . The solution offered by rowdy (pull the trigger and hold it until light goes out) will only work on older machines, the newer machines have more complex electronics that need reseting using an optical reader which plugs into a PC , you will also need the Hilti ODA Software. this is not available to the general public. you may have to send it back to hilti for service and reset. this is free if the machine is less than 2 years old.

Jul 02, 2009 | Hilti TE 7-C 120V Rotary Hammer Drill

2 Answers

Change oil indicator light remains on


There are codes to reset it after the oil has been changed. My car is an 2001 and i have to pump the gas pedal 4 times to reset it when the car is off. Look in the manual it should say in there.

Feb 16, 2009 | 2004 Chevrolet Impala

1 Answer

Check engine light on


they forgot to reset your light take it back and they will reset the light for you..

Dec 01, 2008 | 2007 Ford Mustang GT California Special...

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Triumph Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a Triumph Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...