Question about 2011 Honda Activa

1 Answer

2011 Honda Activa no turn signal or seat belt sound

The turn signal and seat belt chimes don't work

Posted by Anonymous on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Honda Master
  • 39,932 Answers

Hi, Anonymous the answer to this question is way above my pay grade for this situation, I would call or visit my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
http://www.family-motorsports.net/GY6-50cc-150cc.pdf
http://www.partsfish.com/page/oem-parts-for-honda
Honda activa 2009 Owner Manual
Honda Activa 2011
Honda Activa Wikipedia

Posted on Aug 13, 2017

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 72 Answers

SOURCE: seat belt chime always on belts operate correctly

Find the wire under the seat and disconnect it, or pull the fuse (just make sure the fuse is not operating anything else).

Posted on Jul 04, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2001 vw passat, seat belt chime stays on, and if you turn on the headlights, sound is a continuous buzzing. Any ideas how to fix?


Yes, the same way I did. Locate the wire in the buckle that sends the signal and unhook it. My jetta did the same thing. A friend that had a similar problem with his chevy found the wire was one piece with no connections, he found the little speaker for the chime and cut the wire. One method or the other, both worked, Grim

Aug 18, 2015 | Seat Cars & Trucks

1 Answer

How do i disconnect fuse to seat belt alarm tried three time method didnt work


The seat belt warning chime is controlled by the central timer module ! You can't just disconnect fuses , other things may stop working !
Safety Belt Warning Indicator Lamp and Chime
The safety belt indicator and chime feature is controlled by the CTM. The driver safety belt switch is hardwired to the CTM. If at any time during the first 60 seconds after the ignition switch is placed in position II, if the driver safety belt is sensed as being unfastened, the CTM will process the input, and in turn, output a signal to the CTM through a hardwired circuit. In turn the CTM will output a visual warning to the instrument cluster. If at any time during the first six seconds after the ignition switch is place in position II and the safety belt is not fastened, the safety belt warning chime will sound.
When the seat belt is connected the warning still chimes ? Could have code stored in the CTM .
B1464 Safety belt switch circuit short to battery CTM Go To Pinpoint Test B .
SoW

Jun 30, 2015 | 2002 Ford SVT Focus

1 Answer

7 dings and a beep when starting 2000 ford explorer? what does that mean


NOTE: The generic electronic module/central timer module (GEM/CTM) is connected to the ISO link and is diagnosed through the data link connector (DLC) with a scan tool.
There are five warning chimes and lamps the GEM/CTM controls: headlamps operating without the ignition on (chime only), door ajar (chime and lamp), key-in-ignition (chime only), driver seat belt warning (chime and lamp), and message center.


Audible Warnings Warning Condition Lamp Duration Audible Duration Audible Output Safety Belt 60 Seconds 6 Seconds Chime, 60/Min. 740 Hz Key In Ignition - Continuous Chime, 120/Min. 740 Hz Headlamps On - Continuous Chime, 240/Min. 740 Hz Door Ajar Continuous 1 Second Single Tone, 1000 Hz Message Center (Tone Request) - 1 Second Single Tone, 1000 Hz
When the is turned to RUN or START from OFF or ACC, the chime will sound for six seconds or until the safety belt is buckled.
The will turn on for 60 seconds or until the driver safety belt is fastened. Both the chime and the lamp turn on at the same time.
If the safety belt is buckled before the ignition switch is turned to RUN or START, from OFF or ACC, neither the chime nor lamp will be activated.
Anytime the is changed to RUN from START while the safety belt warning indicator is activated, the safety belt warning indicator will remain activated until either the timing sequence has been executed or the safety belt is buckled.
When at least one door is ajar and the key is in the RUN position, the door ajar cluster lamp is activated and remains on until all doors are closed. A warning tone will sound once any time the key is in the ignition switch and any door is open.
The key-in-ignition warning will sound when the driver side is opened with the key in the and the in OFF or ACC. It will continue to sound until the key is removed, the is closed, or the is in RUN or START.
The headlamp-on reminder chime will be activated if the headlamps or parking lamps are on, the key is not in the ignition switch, and the driver door is opened.
A single tone will be provided each time a ground signal is received from the message center. A one-second tone will sound for warning indications from the message center. A 100 milli-second tone will sound for each message center button depressed.

Feb 12, 2015 | 2000 Ford Explorer Eddie Bauer

1 Answer

2005 town and country touring i want to disconnect the seatbelt warning light and chime?


1. Turn the ignition switch to the off position and buckle the seat belt
2. Turn the ignition switch to run (engine does not need to be running), wait for the seat belt light to turn off.
3. Within 60 seconds, unbuckle and rebuckle the drivers seat belt at least 3 times, ending with the seat belt buckled.
4. Turn the ignition key to the off position. A single chime will sound to signify that you have successfully completed the programming.

It can be reactivated by repeating these steps.

The alert will be deactivated but the warning light will continue to stay on will the belt is unfastened.

Feb 13, 2013 | 2005 Chrysler Town & Country

1 Answer

1995 Pontiac bonneville sea t belt chime won't turn off


sounds like a bad wire or sensor in one of the seats or connections. Check grounds and broken wires. Check inside connectors for blockage of some type.

Jan 27, 2013 | 1995 Pontiac Bonneville

1 Answer

2007 HHR Radio and chimes not working


Check the radio fuse. As unusual as it seems, GM has started having the radio (even though not turned on) generate the chimes and turn signal sounds. If the radio fails, all the chimes fail too.

This applies to other vehicles besides the HHR. My 2003 Silverado had the door chimes fade down so I could barely hear them. The fix was to replace the radio (under warranty, fortunately...).

Mar 10, 2010 | 2007 Chevrolet Tahoe

1 Answer

HOW DO YOU DISABLE THE SEAT BELT CHIME ON A 1997 MERCUTY SABLE WA


Q: Are you wearing your seat belt? Yes? No?

A: No.
Solution: Put on your seat belt!!!!!! Save a life!!!

A: Yes.
Soultion: There has to be a fuse either under the dash or under the hood that controlls the chime.
There is a switch in the seatbelt connecter that controlls the chime. It has either failed or the wireing that carried the signal to shut the chime off has been damaged.


Apr 21, 2009 | 1997 Mercury Sable

1 Answer

Seat Belt chime


you could push some thing into the female end like an old blockbuster card or equivelent to depress the switch inside so it thinks your seat belt is on

Aug 22, 2008 | 2005 Chevrolet Malibu

2 Answers

Arter I put on Seat Belt, another chime goes on for 6 rings,then stops


HI.
ON Ford cars and Suv's,
Some times the sound chime after the seat belt buklet.
Is like a open door.
The problem on this car is that the the DOOR AJAR SWITCH. come danaged. and the Body cumputer don't recievethe door close signal.
But is intermitent.
The door ajar switch is on the door lacth.
You only can get front the dealer.
OK. I hope this information can be useful for you.

Thank you.

Jul 17, 2008 | 2001 Ford Explorer Sport

Not finding what you are looking for?
2011 Honda Activa Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

74945 Answers

Gino Cussen
Gino Cussen

Level 2 Expert

216 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...