Question about 1999 Suzuki GSX-R 600

1 Answer

97 srad no power under 4000 rpm in, in first gear acceleration

I have a 97 gsxr 600 bike has rebuilt 99 motor with 97 carbs DandD exhaust K&N filter and stage 1 dyno jet kit. it runs great over 3500 - 4000 rpm. it also idles very nice, very smooth. sounds smooth when i crack throttle open in neutral but if i am trying to acceslearate smoothly from a stop in 1 gear under 3500 rpm it will buck and feel like it wants to fall on its face. if i pull in the cluch while it is doing that it will stall. i have not had a shop work on it but i have cleaned the carbs and the tank tank looked good but carbs had little dirt in bottom of bowls.

Posted by on

  • Robert Cary Jun 17, 2009

    not sure if it had stock needs in it from the begining i bought the bike used. but when i was puting the jet kit in i noticed that the ones i took out were much thinner,

  • Robert Cary Jun 17, 2009

    this was also happening befor i installed jet kit, could this be a pilot jet issue

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 408 Answers

If you have installed the Dynojet kit's carburetor needles take them off and use the stock ones.
Dynojet's needles are for track use only and the don't work properly under 4000rpm.

Posted on Jun 15, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Suzuki gsxr600 srad 1998 bike .When stationary in neutral ot starts and runs fine .... it revs sweetly up through the rev range , when when on the road it accelerates well in 1st , then jit second gear and...


You need to tunes up the carbs. The small jets in the carbs can easily run at idle when partially clogged but can't sustain a high rev without bucking the bike.

Oct 12, 2013 | 1999 Suzuki GSX-R 600

1 Answer

I have a GSXR 600 Srad 1999 Intermittently the bike will stall on take off or sometimes it will try to die on revs when moving into first when decelerating. It is not poor clutch control and only does it...


i have a gxsr srad 600 99 that only stalls when i get to 80 miles to the gallon when my tank is full i have no problems only happens when my tank gets low any help

Jan 13, 2012 | 2006 Suzuki GSR 600

1 Answer

Loss of power accelerating after the bikes warms up GSXR 600 K7


Did you adjust the freeplay on your clutch lever? You should havee 3-5 mm of freeplay. If so, maybe youjust need a new clutch.

May 12, 2010 | 2007 Suzuki GSX-R 600

1 Answer

How do you remove the front disc's from suzuki gsxr 600 srad?


take the front wheel out of the bike....then you will beable to undo the disc bolts & take the disc's off

Mar 13, 2010 | 1997 Suzuki GSX-R 600

2 Answers

My 97 suzuki gsxr 1100. start but that is it Help.


Rebuild the top end? Run screaming from that shop. The fact that they said they couldn't sync the carbs should have been your first clue. I would have been suggesting a fuel problem anyway but take it to a shop that knows what it's doing and you should be fine but you will probably have to replace th spark plugs because of the fuel problem.

Feb 25, 2010 | 2008 Suzuki GSX-R 600

1 Answer

I have a 97 gsxr 600 bike has rebuilt 99 motor with 97 carbs DandD exhaust K&N filter and stage 1 dyno jet kit. it runs great over 3500 - 4000 rpm. It also idles very nice, very smooth. Sounds smooth...


if you had cam overlap then it wouldnt start and when you pushed the starter if would smash the valves together, if it runs ok every where else then i would say its a crab fuel problem and at that rev range it would be pilot jets as the mains dont come into use at that rev range you should take your bike to your local dyno center and have them run it up they will sort you problem

Jun 19, 2009 | Suzuki GSX-R 600 M Motorcycles

1 Answer

My gsxr 600 srad 97 modle it runs fine when cold but when warm it splutters when in low revs and it back fires now an again


i have just had the same problem with my 99 srad 600. there is only one soloution to this and it is not a dyno, that just makes thing worse, the flat spot just off idle is due to it beign on carbs and i have put slightly shorter inlet tracts onto the carbs which helps them breeth easier this coupled with a new front sproket which is one tooth less than standard will get you over the stutter problem and will help the bike at lower revs as the sproket inceases the rev range right from the off throttle position, but be careful as the lower gearing makes for some good wheelies if your over keen on the gas. lol.

Apr 21, 2009 | 1997 Suzuki GSX-R 600

7 Answers

Top speed 2005 Suzuki GSX R 600?


It depends on weither or not you have any aftermarket stuff put on the bike. My 600 will do 182 but that is with a power commander, acceleration kit, k&n air induction kit, k&n filter, and having it dyno tuned. My buddys stock 600 will do about 166 mph

Nov 10, 2008 | 2007 Suzuki GSX-R 600

Not finding what you are looking for?
1999 Suzuki GSX-R 600 Logo

857 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

76051 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4521 Answers

Richard
Richard

Level 2 Expert

83 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...