Question about Harley Davidson FLHTCUI Electra Glide Ultra Classic Motorcycles

1 Answer

Engine pops and back fires

Stage 2 big bore

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Harley Davidson Master
  • 43,050 Answers

Hi Anonymous, and the usual suspects are:
1. Spark plugs in bad condition or partially fouled.
2. Spark plug cables in bad condition or leaking.
3. Spark plug gap to close or to wide.
4. Faulty ignition coil, module and or sensor.
5. Battery nearly discharged.
6. Damaged wire or loose connections at battery terminals,
ignition coil, or plug between ignition sensor and module.
7. Intermittent short circuit due to damaged wire insulation.
8. Water or dirt in fuel system, carburetor or filter.
9. Fuel tank vent system plugged or carburetor vent line closed off.
10. Carburetor controls misadjusted.
11. Damaged carburetor.
12. Loose or dirty ignition module connector at crankcase.
13. Faulty MAP, CKP, and or CMP sensors.
14. Incorrect valve timing.
15. Weak or broken valve springs.
16. Damage intake or exhaust vale.
This should keep you busy for awhile. Good luck

Posted on May 01, 2015

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Torque settings on a yaris 1.3 16v big ends,mains,flywheel,cylinderhead


Toyota Yaris Main and Big end Torque settings:
Tighten the main and big end bolts in sequential order and in two steps.
Main bearings. Stage 1.
22 ft lbs.
Stage 2.
44 ft lbs

Big end bearings.
Stage 1.
11 ft lbs.
Then Rotate bolt head a further by 90 degrees

Head bolt torque must be done in 3 steps:
1st 22 ft lbs
2nd 43 ft lbs
final 47 ft lbs
use this sequence of tightening:
9 - 3 -1 -6 -8
7 - 5 - 2 -4 - 10

Flywheel spec:
65 ft lbs

Jul 15, 2016 | 2007 Toyota Yaris

Tip

Harley davidson 1550


my Harley Davidson has a 1550 big bore kit and now it popping and back firing when you try to feed gas to motor and sounds like a knock in the motor

on Jun 21, 2008 | Harley Davidson Road Tech HA90 MP3 Player

1 Answer

I want to know the torque specifications for a 4D32 mitsubishi engine ?


we have 4g32 cyl head stage 1 70-76 nm stage 2 run for15 mins stage 3 tighten 78-83 nm
main bearings stage1 24-27 nm
stage2 49 -54 nm
big end stage 1 15-17 nm stage 2 31-34 nm I hope this helps from Coloneus

Jun 07, 2016 | Mitsubishi Cars & Trucks

2 Answers

1998 buick park ave car back fired and the map sensor popped off and cracked the big black piece of plastic what is the big plastic cover called?


It sounds to me like you are describing the intake plenum. What on earth happened? were you spraying starting fluid in the engine or something?

Aug 08, 2011 | 1998 Buick Park Avenue

1 Answer

Im looking for a spark plug wirng diagram for a 1966 corette 427


1966 - 1969 with 4 Barrel Carb (L36)
(Low Compression Model)
Max Brake Horsepower - 390 @ 5200 rpm
Max Torque - 470 @ 3600 rpm
Stroke - 3.76
Bore - 4.251
Compression - 10.25
Firing Order - 18436572

1966 with 4 Barrel Carb (L72)
(High Compression Model)
Max Brake Horsepower - 425 @ 5600 rpm
Max Torque - 460 @ 4000 rpm
Stroke - 3.76
Bore - 4.251
Compression - 11.0
Firing Order - 18436572


zjlimited_1418.jpg

283, 327, 396, 409 and 427 CID Engine 1965-1966
Firing Order 1-8-4-3-6-5-7-2


zjlimited_1417.jpg

350 CID Engine 1969-1974 Corvette, 427 CID Engine 1969 Corvette
Firing Order 1-8-4-3-6-5-7-2


Hope this helps (remember to rate this answer)

Jun 15, 2011 | Chevrolet Corvette Cars & Trucks

1 Answer

I need the torque specs for the main and rod bolt for a 99 escort 2.0l engine


engine tightening torques
Main bearings Renew bolts/nuts No
Main bearings Stage 1 43 Nm
Main bearings Stage 2 85 Nm
Big end bearings Renew bolts/nuts Yes
Big end bearings Stage 1 15 Nm
Big end bearings Stage 2 90°

Jan 21, 2010 | 2004 Ford Focus

1 Answer

Hi, im rebuilting a 88 2.0l 8v and i need the torque mesure for the block and head bolt thx


Eng.code 3A- Cyl.head-stage 1-40Nm,stage 2-60Nm,stage 3-180degrees. Main bearings - stage 1 - 35Nm, stage 2 - 65Nm, Big ends - stage 1 - 30Nm, stage 2 - 90degrees. Flywheel - stage 1- 60Nm, stage 2 90degrees. Eng.code AAD - All torques same as engine 3A. cheers

Dec 01, 2009 | 1988 Audi 80

1 Answer

1999 passat, sat for 2 yrs. Replaced battery and drove approx 20 miles no prob. Now car wont idle, runs super rough, must hold gas a little to keep running. Car wont go more than 20mph seems like it is...


power stage for ignition system is bad and the throttle needs adapted there is nothing wrong with the transmission the power stage is what fires the coils it usually stops firing cyl#2

Aug 03, 2009 | 1999 Volkswagen Passat

2 Answers

WOULD YOU KNOW THE TORQUE SETTINGS FOR MAIN BEARING AND BIG END BEARING CAPS FOR ISUZU 4JG2 ENGINE


Mains Stage 1 83nm
Mains Stage 2 167nm

Big ends Stage 1 29nm
Big ends Stage 2 45 - 60 degrees

Hope this helps

Jul 10, 2009 | 1994 Isuzu Trooper

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

67 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

Mike

Level 3 Expert

4340 Answers

yadayada
yadayada

Level 3 Expert

76649 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...