Question about 2005 Suzuki Boulevard C50

1 Answer

How do I replace the bezel on 2012 Suzuki C50T headlight?

I have a damaged headlamp bezel on my 2012 Suzuki C50T how do I replace the bezel?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

There should be two small philips screws on each side of the bezel. Remove those screws, then turn the bezel slightly counter-clockwise (if you're facing the front of the bike) and if should pop loose and pull out.

Posted on May 10, 2014

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 7 Answers

SOURCE: I got a 08 Suzuki boulevard c50t, what weight of

i dont knowbut i whant to know that same question for my motorcycle i just called the dealer

Posted on Jun 22, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2015 suzuki boulevard c50t and i would like to know where the fuse box is for beam headlight?


Hi, Meghan sorry you can't find the first and best tool you ever bought for your Suzuki despair not for a mere $0 you can download another one. For more information about your issue and valuable free downloads that you will need please visit the websites below. Good luck and have a nice day.
Fuse box
2015 suzuki boulevard c50t fuse panel location Google Search
99500 38047 03E pdf
99011 43H50 03A pdf
OEM parts for Suzuki

Feb 16, 2016 | Suzuki Motorcycles

2 Answers

How to replace the headlight switch assembly on a 1997 dodge grand caravan


The best I can offer is for a 1996 caravan:

REMOVAL
  1. Remove steering column cover.
  2. Remove over steering column bezel.
  3. Remove left end cover.
  4. Remove screw at left end of cluster bezel and headlamp switch.
  5. Remove screws holding cluster bezel to instrument panel from each side of steering column.
  6. Disconnect clip holding cluster bezel to instrument panel from above right vent louver.
  7. Separate cluster bezel from instrument panel.
Disconnect wire connectors from back of the bezel.

INSTALLATION
  1. Connect wire connectors into back of the bezel.
  2. Place cluster bezel in position on instrument panel. Use care not to place hands on louvers.
  3. Connect clips to hold cluster bezel to instrument panel. Use care not to add pressure on the A/C louvers to seat the cluster bezel clips.
  4. Install screws to hold cluster bezel to instrument panel on each side of steering column.
  5. Install screw at left end of cluster bezel and headlamp switch.
  6. Install left end cover.
  7. Install over steering column bezel.
  8. Install lower steering column cover.



25677031-lce4vfjfhjrgmukp0vzfrbis-3-0.gif

May 02, 2015 | 1997 Dodge Grand Caravan

1 Answer

Replace headlight bulb in Suzuki xl7


unscrew the headlight bezel around the bulb and unplug then plug new one in,then replace the bezel and screws

Apr 22, 2015 | Suzuki Cars & Trucks

1 Answer

How do I remove the left side air vent cover?


Clips hold it in place , take a flat screw driver with some tape around the end , so you don't damage you dash panel ! Stick the screw driver between the dash panel an the vent cover an pry it up . Be carful plastic , Once you get it started you can get you hand , fingers behind an pull ! good luck hope this helps !
Instrument Panel Outer Air Outlet - Left
Tip
  1. Using a flat-bladed tool release, the headlamp bezel assembly from the instrument panel.
  2. Disconnect the headlamp electrical connector.
Using a flat-bladed tool release, the air outlet from the headlamp bezel.

Mar 14, 2015 | 2007 Buick Lucerne

1 Answer

Need to remove and repair headlight motor on a 1988 corvette


REMOVAL & INSTALLATION 1984–88 Vehicles
  1. Open the hood, then turn the headlights on.
  2. Detach the headlight motor wire on the outer side of the headlight.
  3. Turn the headlights off (the disconnected light should stay open).
  4. Unfasten the 4 screws at the bezel. There are 2 at the front and 2 at the sides. Fig. 1: With the hood in the raised position, unfasten the Torx® screws from the outer side of the headlight bezel/trim piece 91036p23.jpg
    Fig. 2: You must then remove the screws from the inner side of the bezel/trim piece 91036p24.jpg

  5. Remove the bezel. Fig. 3: Remove the first of the top bezel/retaining ring screws . . . 91036p25.jpg
    Fig. 4: . . . then remove the remaining Torx® screw 91036p26.jpg
    Fig. 5: Lift the bezel/trim piece away from the headlight assembly 91036p27.jpg

  6. Remove the retaining spring by carefully using a hooked end tool, such as a cotter pin removal tool to move it to the side.
  7. Remove the headlight from the aiming pins by rotating the headlight toward the center of the car.
  8. Unfasten the 4 retaining ring screws, then remove the ring. Fig. 6: With the hood closed, you can see the 4 headlight retaining ring screws (1) and 2 aiming screws (2) 91036p28.jpg
    Fig. 7: Remove ONLY the 4 retaining ring screws, do NOT touch the aiming screws 91036p29.jpg

  9. Remove the headlight pump from the mounting bracket, unplugging the socket as you pull it away. Fig. 8: Remove the headlight away from the mounting bracket, unplugging the socket as you pull it away 91036p30.jpg
    To install:
  10. Install the headlight bulb, making sure it is plugged in properly.
  11. Position the retaining ring and secure with the 4 screws.
  12. Position the headlight into the aiming pins. Move the retaining spring back into place.
  13. Install the bezel and secure with the retainers.
  14. Turn the headlights on, then connect the headlight motor wire.
  15. Turn the headlights off. Both should lower.
  16. Close the hood. Check the aim of the headlights, and adjust if necessary.
1989–96 Vehicles
  1. Open the hood.
  2. Open the headlight door halfway. This can be done either by turning the headlight switch on, then back to the parking lamp on position, or by the manual headlamp control knob (which is located on the inboard side of the headlight door). NOTE: Before removing the screws from the side of the headlight bezel, place your hand under the bezel to support and prevent damage to it.
  3. Remove the screws from the front of the headlight bezel. NOTE: Before removing the screws from the side of the headlight bezel, place your hand under the bezel to support and prevent damage to it.
  4. Remove the Phillips head screws from each side of the headlight bezel.
  5. Remove the bezel by pulling it straight out from the engine side of the hood. Fig. 9: View of the headlight bezel mounting 91036g28.gif

  6. Unfasten the screws from the headlight retaining ring.
  7. Remove the headlamp from the assembly, unplugging the electrical connector as you are pulling it away. Fig. 10: Exploded view of the headlight assembly 91036g29.gif
    Fig. 11: Location of the headlight mounting and aiming screws 91036g30.gif
    To install:
  8. Attach the headlight electrical connector.
  9. Position the retaining ring and install the screws securing the ring to the headlight.
  10. Position the bezel in place on the headlight assembly.
  11. Install the screws on each side of the bezel and tighten to 51 inch lbs. (5.8 Nm).
  12. Install the screws on the front of the bezel and tighten to 17 inch lbs. (1.9 Nm).
  13. Cycle the headlamps, then close the hood. Check the headlight aim, and adjust if necessary.
prev.gif next.gif

Jul 07, 2010 | 1988 Chevrolet Corvette

1 Answer

How do I replace dimmer switch on 2001 Tahoe?


Removal & Installation (If dimmer is on headlamp switch area) To Remove:
Instrument Cluster Bezel removal chevy_sub15_02-04_instrum_clust_bezel_rem.gif

  1. Remove or disconnect the following:
    • The instrument cluster bezel
      1. Unsnap the switch from the housing
    • The electrical connectors Headlight switch removal chevy_sub15_02-04_headlight_switch_rem.gif

    • The switch
To Install:
  1. Install or connect the following:
    • The electrical connectors
    • The headlamp switch by snapping the headlamps switch into place
    • The bezel to the instrument panel
  2. Operate the headlights to check performance
prev.gif next.gif

Jul 16, 2010 | 2002 Chevrolet Tahoe

1 Answer

Headlight replacement on a 1991 pontiac grand am


Sealed Beam Type
  1. Disconnect the negative battery cable.
  2. Unfasten the headlight bezel attaching screws, then remove the bezel.
8ed2813.gif
Remove the headlight bezel

To avoid turning the vertical or horizontal aiming screws, refer to the illustration before removing the headlight retainer.
  1. Unfasten the headlight retainer attaching screws, then remove the retainer.
e11bb51.gif
Remove the headlight trim screws then...

67522f3.gif
... pull the trim off while holding the bulb

4. Pull the headlight out, then carefully detach the electrical connector.

8d80048.gif
Pull the bulb out far enough to disconnect the wiring


To install:
  1. Attach the electrical connector to the new headlamp.
  2. Place the headlamp into the socket.
  3. Install the retainer, then tighten the attaching screws.
  4. Connect the negative battery cable, then turn the headlight switch on, to be sure the headlights are operating.
  5. Install the headlight bezel and secure using the attaching screws.

Jan 18, 2010 | 1991 Pontiac Grand Am

3 Answers

87 Lincoln headlight changing instructions


You must first remove the Headlamp bezel which is the chrome trim that surrounds the duel headlamp housing. The chrome trim surround is mounted to the Headlamp mount panel with three nuts which you can only access on the inside. Pop open the hood and look on the inside near were the headlamp bulbs are. You will see the three mount nuts for the headlamp bezel. Might be rusty so first give it a shot of WD40 or similar. Remove the nuts and then you can lift the headlamp bezel from the outside away from the headlamp bulbs. The headlamp bezel only has tabs that slid into a slot on the bottom so you can lift out once the top three nuts are removed. Once the headlamp bezel has been removed you can then access the 4 screws that hold the headlamp trim ring2.gif in place which is what holds the headlamp bulb in place. There are several other screws that in the same area but they are only for adjustment of the headlamp bulbs within the housing. Leave them in place. Remove the stainless steel ring that is holding the lamp in place, and then unplug the headlamp from the back and replace the headlamp. Should take you less than 5 or 10 minutes. Dan

Sep 21, 2009 | 1989 Lincoln Town Car

1 Answer

I need to change the headlight i don't know how


You must first remove the Headlamp bezel which is the chrome trim that surrounds the duel headlamp housing. The chrome trim surround is mounted to the Headlamp mount panel with three nuts which you can only access on the inside. Pop open the hood and look on the inside near were the headlamp bulbs are. You will see the three mount nuts for the headlamp bezel. Might be rusty so first give it a shot of WD40 or similar. Remove the nuts and then you can lift the headlamp bezel from the outside away from the headlamp bulbs. The headlamp bezel only has tabs that slid into a slot on the bottom so you can left out once the top three nuts are removed. Once the headlamp bezel has been removed you can then access the 4 screws that hold the headlamp trim ring in place which is what holds the headlamp bulb in place. Remove this ring and then unplug the headlamp from the back and replace the headlamp. Should take you less than 5 or 10 minutes. Dan

Aug 09, 2009 | 1989 Lincoln Town Car

Not finding what you are looking for?
2005 Suzuki Boulevard C50 Logo

Related Topics:

128 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

Richard
Richard

Level 2 Expert

83 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...