Question about 2007 Honda FES 125 Pantheon

1 Answer

2007 Honda FES 125 Pantheon how do you remove and reattach the glove box

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Honda Master
  • 39,887 Answers

Hi, Anonymous for this scenario you will need your service, parts fiche, and owners manual if you can't find the best tool you ever bought for your Honda, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
http://www.family-motorsports.net/GY6-50cc-150cc.pdf
http://www.partsfish.com/page/oem-parts-for-honda
Honda FES125 Owner Manual
https://www.ultimatespecs.com/motorcycles-specs/honda/honda-fes-125-pantheon-2007
Honda FES125 Pantheon

Posted on Aug 14, 2017

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 3567 Answers

SOURCE: honda pantheon fes 125 cc

FI stands for Fuel Injection. The fuel system sensors have detected a problem. It could be anything > a dirty air filter restricting airflow, a plugged injector, an error in fuel mapping, any number of things. Serious problems can trigger the computer to prevent the engine from starting until the problem is fixed. You will need to take the bike to a dealer to have them plug in a code reader. The code reader will tell you exactly what problem has been detected. There is also a chance a sensor has gone bad and is giving a false signal. Keep that in mind. Now determine if you want to do the fix or have the dealer do it.

Posted on Sep 13, 2011

  • 3799 Answers

SOURCE: where is chassis number on Honda FES 125 Pantheon 125?

The usual place to find the chassis number is on the headstock. This is because the headstock can't be changed as a spare part. The headstock is the point where the forks rotate in the frame.

Posted on Mar 14, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2010 Subaru Outback - Glove box removal


Remove glove box damper.
Release the stoppers and remove the glove box lid assembly by pulling it toward you.
Release the clips and remove the right side instrument panel side cover.
Remove the glove box panel.
Release the clips and remove the glove box under cover.
Release the clips and claws and remove the ornament panel assembly.
Remove the screws and release the claws and then detach the glove box back panel.
Disconnect the glove box light LED connector.

Oct 04, 2013 | Vehicle Parts & Accessories

1 Answer

How to change cabin filter 2011 Lacrosse


I just changed mine yesterday and these tips listed above were unfortunately incorrect.

Step 1 - Open the passenger door
There is a panel that has no screws on the flatside of the dashboard which faces against the closed door at the jam side. Use a body tool and pry the panel carefully exposing the inside area of the glovebox. If possible dont do this in cold weather because the tabs are plastic. Inside the panel you will see one small tab that the glove box has a 1/4 plastic clip seated in the tab.

Step 2 - Open the glove box. Remove the 3 hex screws on the top interior row of the glove box.

Step 3 - At the right and left corners of the bottom of the glove box remove the two front facing screws on the lower hinge.

Step 4- At the very bottom parallel to the floor there are two more hex screws remove those (they hold the plastic vent in place underneath the glove box. Pull the vent downward to release the tabs.
IMPORTANT: Dont forget to go back to step 1 and pull the small tab from the slot in the dashboard cover area ( Inside the panel you will see one small tab that the glove box has a 1/4 plastic clip seated in the tab)

Step 5 - Pull down on the glove box to release the clips.

Step 6 - You will see a black box inside. There are three tabs (right, top, and left) pull them individually to remove the front facing cover. Inside you will see the air filter. Remove and have airflow arrow pointed downward.

Reverse steps to reinstall. Be sure to line up the clips before pressing them back in place. Do not force them!

Good luck. I hope this helps. I did mine on the first attempt with no issues in about 10 minutes (I'm not a mechanic).

Aug 26, 2012 | Buick LaCrosse Cars & Trucks

1 Answer

Hi my honda is CR_V 2005 and i cannot find benzin filter can you describe where can i find itr???/ thank you


  • I asumes you mean the caben filter?



  • Open the glove box door and remove the items from the glove box.

  • 2

    Locate the two rubber stop knobs on the inside of the glove box. There is one stop knob on each side of the glove box.

  • 3

    Push the rubber stop knobs out to unhook the glove box. Lower the glove box completely to access the area behind it.

  • 4

    Remove the plastic filter cover by pressing the tab on the left part of the cover.

  • 5

    Pull out the first pollen filter, and then slide the other filter over to pull it out.

  • 6

    Install one filter (arrows facing down) and push it over to the right side of the filter compartment, and then install the other filter.

  • 7

    Replace the filter cover, and then lift the glove box back into position. Replace the rubber stop knobs to reattach the glove box.

  • Nov 28, 2010 | 2005 Honda CR-V

    1 Answer

    Changing cab filter in 200 ford f150


    If you are talking about the cabin air filter, this filters the outside air for the HVAC.
    Hastings Filter (#AF1057) shows one for the 97-03 MY trucks.

    Remove the screws that hold the horizontal filter housing cover from behind the glove box (no need to open the glove box);

    Pull the cabin filter straight down (sits vertical behind the glove box inside the housing).

    Install replacement and reattach the cover.

    Sep 18, 2010 | 2000 Ford F150 Flareside SuperCab

    1 Answer

    How do get the cabin filter out of 2002 f150 supercrew truck and where is it


    If you are talking about the cabin air filter, this filters the outside air for the HVAC.
    Hastings Filter (#AF1057) shows one for the 97-03 MY trucks.

    Remove the screws that hold the horizontal filter housing cover from behind the glove box (no need to open the glove box);

    Pull the cabin filter straight down (sits vertical behind the glove box inside the housing).

    Install replacement and reattach the cover.

    Aug 30, 2010 | 2003 Ford F150 Regular Cab

    1 Answer

    Where is the computer located? ona 1993 cadillac seville


    The pcm is located on the passengers side behind the glove box.There will be 2 computers one is the bcm and the other is the pcm.The bcm is the body control module.You will have to remove the glove box to remove the pcm.Get the part number and call the parts department at the dealership and ask them which one is which.I believe it is on the kick panel.Hope this helps.Good luck.

    Aug 03, 2010 | 1993 Cadillac Seville

    1 Answer

    Fuse box locations on a 2006 jeep wrangler 4.0 6speed manual


    To access the fuse panel the glove box must be removed. It is removed by slipping the glove box strap off the hook and letting the door roll down off its hinges. To reinstall, position the glove box door at an 8 o’clock orientation, engage the hinge hook formations on the lower edge of the glove box door with the hinge pins on the lower edge of the instrument panel. Tilt the upper edge of the glove box door upward toward the instrument panel enough to reattach the glove box strap to the door. Rotate glove box door to closed position. Open and close to insure proper installation.

    ed6951f.jpg

    Also can download the 2006 TJ Wrangler - Owners Manual

    Hope helps (remember rated this). Good luck.

    Jul 16, 2010 | 2006 Jeep Wrangler

    1 Answer

    Body control module for 2003 saturn l300


    the body control module or BCM is located on top of the inside of the glove box,remove the lower trim panel under the passenger foot well under the glove box,the the 4 screws that hold the glove box door on,,,then the screws that hold the box to the dash and the BCM is slid into the top of the box,,,,,,you are gonna need it programmed as it comes new blank,and the car will not start with out a program

    Feb 22, 2010 | 2003 Saturn L-Series

    1 Answer

    Change a heater core


    1. Disconnect battery ground cable.
    2. Remove glove box attaching screws, then the glove box.
    3. Remove lower sound insulator attaching screws and nuts, then the lower sound insulator.

    Heater And A/C Programmer And Actuators
    1. Remove programmer as follows:


    1. Remove programmer shield attaching screws, then the programmer shield.
    2. Disconnect threaded rod from programmer.
    3. Disconnect programmer electrical and vacuum connector, then remove programmer.


    1. Disconnect body control module electrical connector, then remove module attaching screws and module.
    2. Remove relay panel from module assembly, then the module assembly heater core cover.
    3. Disconnect heater hoses from heater core.
    4. Remove two heater core attaching screws, then the heater core.
    5. Reverse procedure to install.

    Oct 29, 2009 | 1995 Cadillac DeVille

    1 Answer

    HEATER


    1. Disconnect battery ground cable.
    2. Remove glove box attaching screws, then the glove box.
    3. Remove lower sound insulator attaching screws and nuts, then the lower sound insulator.
    Heater And A/C Programmer And Actuators

    1. Remove programmer as follows:
    1. Remove programmer shield attaching screws, then the programmer shield.
    2. Disconnect threaded rod from programmer.
    3. Disconnect programmer electrical and vacuum connector, then remove programmer.

    1. Disconnect body control module electrical connector, then remove module attaching screws and module.
    2. Remove relay panel from module assembly, then the module assembly heater core cover.
    3. Disconnect heater hoses from heater core.
    4. Remove two heater core attaching screws, then the heater core.
    5. Reverse procedure to install.

    Jan 03, 2009 | 1994 Cadillac DeVille

    Not finding what you are looking for?
    2007 Honda FES 125 Pantheon Logo

    Related Topics:

    18 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Honda Experts

    Arnie Burke
    Arnie Burke

    Level 3 Expert

    4514 Answers

    yadayada
    yadayada

    Level 3 Expert

    74896 Answers

    Gino Cussen
    Gino Cussen

    Level 2 Expert

    216 Answers

    Are you a Honda Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...