Question about 2011 TVS Scooty Streak

Open Question

The glass of speedometer has broken is there any provision to replace that with new one

Glass of speedometer has broken off how could i repair it

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to replace outside side power mirrors in original housing? 2008 Ford Edge


Google replacement mirror glass for Ford Edge 08.

They make a replacement mirror glass available that uses double sticky tape. This has worked great for me. The heated function still continued to work!! In my case I replaced a scratched mirror leaving the old mirror in place. If yours is broken included is a link for a procedure to replace a broken mirror.

Confirm the dimensions before purchasing. Some car manufactures have more than one design for different model cars same year..

26182860-kzssal3k2qlm4jsc53ab1s2h-2-0.jpg This is an easy repair.
How to Repair and Replace Broken Side Mirror Glass DIY

May 02, 2016 | 2008 Ford Edge SEL

1 Answer

How to replace speedometer glass


the newer cars speedometer glass is plastic and is al of one piece you have to get the whole instrument cluster to replace the glass getting a used one from a used part yard might be a good idea but a new one is best

Aug 20, 2014 | Cars & Trucks

1 Answer

Intermitent speedometer sticks at zero. Tap glass & it works ???


HI,
The speedometer will need to be removed and repaired/replaced as this is a faulty winding in the speedometer head which is sticking.
Hope this helped.

Jul 25, 2011 | 2003 Hyundai Santa Fe

2 Answers

My speedometer didnt function anymore, i need to replace the whole assembly of my speedometer.


No I believe the speed ometer cable is broken.Dissconnect sppedometer cable from instrunent cluster,romove cable from back of speedometer &transmission case .romove speedometer from sppedometer cable housing if broken replace with new & make sure you grease cable when installing back in cale housing reconnect to transmission &back of speedometer.keep posting

May 23, 2011 | Nissan Frontier Cars & Trucks

2 Answers

Glass is broken. How do I replace the glass


HP does not sell the glass part for this scanner separately. Therefore replacing it yourself or having it repaired it not possible.
You will need to purchase a new scanner - the same one is available at www.dolphininc.net for $195.

Mar 05, 2011 | HP ScanJet 4600 Flatbed Scanner

1 Answer

Broken glass on oven door how to replace it


Hi,


Here is a tip that I wrote about the oven door glass replacement...


It is not that hard...

Range/Stove/ Oven Door Glass Replacement


heatman101

Feb 04, 2011 | Maytag MGR5775QD Gas Kitchen Range

1 Answer

The odometer does not work at all, what could be the problem?


Hello TDK.
If the speedometer is working and not the odometer the problem is in the speedometer housing and to repair will need replacement.
An internal gear is broken and not allowing the transfer of rotation from the speedometer through to the odometer.
I had a 83 Grand Prix. Beautiful car! Wish I had a new one.
Take care and best of the season to you.

KL

Dec 22, 2009 | 1983 Pontiac Grand Prix

1 Answer

Outer glas of the dor broken its a QA make built


I will give you summary instructions on how to repair the door outer glass on a built in kitchen.

Prepare a space on a table, where to work on the door. Cover the taple with newspaper.

Remove the door. On some model you may just need to lift and pull, on others you need to free the hinges, usually undoing few screws.

Put the door on the table. Remove fragments of splintered glass if the glass is falling apart, otherwise leave it all in one piece.

On the table remove the set of screws that are holding the external frame and glass.
Remove external glass and replace it. You can use pliers and a cloth if needed.

Do operations in revers order to refit new glass.

You can find parts here:
Appliance Parts -Research, Repair & Replace.

Oct 14, 2009 | Ovens

1 Answer

ODOMETER DOESN'T WORK


Hi Tracy:

You don't say whether the speedometer has also stopped working. If it is still working, then it's an internal problem in the speedometer unit which will likely need to be replaced.

If the speedometer has also stopped, it's often the speedometer cable that has failed; have the cable checked (it could come out of its socket at either end, or be broken). This is a much less costly repair than replacing the speedometer unit.

Often the old cable can be pulled from the sleeve, leaving the sleeve in place, and a new one pushed into the old sleeve to replace the defective cable.

Let us know any additional information.

Saabreur

Jun 17, 2009 | 1990 Saab 900 Hatchback

2 Answers

Replace inner oven door glass on kitchenaid wall oven


To replace the door glass do the following:

0 Check if there is a hinge stop bracket located at the hinge point of entry on the oven, in that case remove it.
1 remove the oven door by pulling it up and removing from the the hinges. If glass is broken , then secure glass with tape. Have a table with a cloth on top ready to lay the door.
2 Remove the outer screws , starting from lower side of the panel.
3Removethe inner screws. Keep all set of screws ordered, and take note of theorder you remove them. You will follow reverse order in reassembly.
4 the frame will be free now,
5 Remove the external glass panel and leave it in a safe place.
6 Replace the inner glass.
7 Clean outer glass and metal door, re-assemble it and mount it back

I also report testimonials for your model:

"
removed the door from the oven by releasing clips attached to the door hinge -- very nicely engineered. Removed about 6 philips head screws to allow the door assembly to be taken apart for access to the glass. Lifted out the broken glass, cleaned the inside of the door, installed the new glass, reassembled the door (a two minute project), and reattached the door to the oven. Cleaning the inside of the door"

"
I removed the oven door by lifting it off with the hinges. Disassembled the door parts one at time making sure I remember where I removed the screws until I am able to get to the broken glass. The most difficult part is making sure that the insulation strip & the gasket stayed in place after I replaced the broken glass & doing the reverse process of installing the parts together. Relatively easy process as long as you remember where the parts go. When in doubt, I had to refer to the pictorial of the disassembled door shown on your website. "

See diagram below , click on picture to enlarge:

72e8915.gif

Part here: Inner Door Glass

Mar 22, 2009 | KitchenAid KEBC101 Electric Single Oven

Not finding what you are looking for?
2011 TVS Scooty Streak Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top TVS Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Milton Scott

Level 1 Expert

23 Answers

Are you a TVS Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...