Question about 2006 Harley Davidson FXDBI Street Bob

1 Answer

No power Won't start none of the lights come on

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    One Above All:

    The expert with highest point at the last day of the past 12 weeks.

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

  • Harley Davidson Master
  • 47,204 Answers

Hi Anonymous, and the usual suspects are:
1.Ignition/Light Key Switch not in IGNITION position.
2.Engine Stop switch in the OFF position.
3.Discharged battery, loose or corroded connections (solenoid chatters).
4. Bank Angle Sensor tripped and Ignition/Light Key Switch not cycled to Off and then back to Ignition
5. Starter control circuit, relay or solenoid faulty.
6. Electric starter shaft pinion gear not engaging or over-running clutch slipping.
For a possible prime suspect please visit the website below:
Harley Diagnostic Trouble Codes
Good luck

Posted on May 02, 2015

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1999 Pontiac Grand Prix gtp . The driver window goes down but won't come back up . None of the other windows does anything . What could be the problem ?


All four windows get power and ground thru the driver switch.
So I would start by checking the driver switch with a meter or test light.

Apr 23, 2013 | Cars & Trucks

1 Answer

Dishwasher won' t start. None of the lights are coming on


dishwasher wont start. none of the lights are coming on.

Nov 09, 2012 | Jenn-Air 24 in. JDB1080AWS Built-in...

1 Answer

Macbook pro won't start/charge


It appears as if your power supply is dead. The power supply is inline with your power cord and has a light on it, if I am correct. Since the green light was dim, then went out all together on your power supply, that would indicate that it would not take a charge any longer, and the dim light, down to none, was the rest of your battery draining. Assuming you tried multiple power outlets, my suggestion would to borrow a power source from a friend and check it, or go to best buy/Apple store and have them use one of theirs to see if it comes on.

Sep 25, 2012 | Apple MacBook Pro Laptop Computer with...

1 Answer

Car won't start. Sounds like the engine flooded. Not the starter. Also loses power going uphill and when accelerating.


Check Engine Light flashing when accelerating ,severe engine misfire . Something in the ignition system is breaking down under a load . If the starter engages an spins the engine when you turn the key to start an it doesn't start an run , it has no spark or fuel pressure . If you don't know this or how to diagnose .suggest you take your vehicle to a qualified repair shop . Pull two plug wires off the top of the same coil an crank the engine , if you do not see a spark jump from one coil tower to the other you have an ignition system problem . ignition module or crankshaft position sensor


Flashing check engine light CarMD

Nov 16, 2017 | 2000 Pontiac Bonneville

1 Answer

2008 malibu classic won't start


Grab a test light go down to the starter, hook to a good ground and probe the battery cable. If that has power probe the solenoid engage wire( its the little one) have a helper turn the key to start if that gets power replace the starter.

May 13, 2012 | 2008 Chevrolet Malibu Classic

1 Answer

Dryer lights up but won't start and none of the


Hi,

There can be many reasons why your dryer will not start or turn...

The most common causes are the belt breaking or jumping off, or the motor goingbad...

Here are a couple of tips that I wrote will help you to figure out why yourdryer will not run...

Dryer Repair - The Dryer is not Turning

Dryer Repair - The dryer will not start


heatman101

Aug 27, 2011 | Samsung Dryers

1 Answer

I can't get the control panel to reset. The wash cycle light comes on but it just beeps and the dishwasher won't start. I press the start button and it stops beeping for a minute but it still...


II might need the actual model number. However, you can go to page 9 on this manual and check if the flashing options can fix the problem. I am assuming you have already tried to turn the power off and back on.

The ohter thing to try is the reset sequence. Within 6-7 secs press High Temp/ Heat Dry/ High Temp/ Heat Dry/ High Temp/ Heat Dry. All lights should light up, press Start button to exit.

Jun 24, 2011 | GE Nautilus 24" Built-in Dishwasher

1 Answer

Unit just quit. won't start up. press start button and won't even light up


please provide the model number of the Samsung dishwasher.
if none of the lights light up, then a fuse might be blown somewhere. If the problem is the start buttion does not start the dishwasher , then the door latch switch could be faulty.

Jun 23, 2011 | Samsung Dishwashers

1 Answer

I was on my laptop, it was plugged in and all of a sudden the screen started to kinda blink and than it completely shut off and now won't turn on None of the power lights come on when plugged in...


Hi,
First, we need info about your laptop brand, model, and OS
Please remove the battery, hold on power button for about 50-60 seconds, then plug-in the charger and turn the laptop ON,
Please tell us your results
Good Luck

May 13, 2011 | Toshiba Computers & Internet

1 Answer

Hi! Ive bought an Asus LS246h today and it won't start. Ive checked all cables and Ive got power on the power plug. None of the lights at the monitor are working! Is my monitor defect?


Hello there,
It looks like you have a faulty monitor. Make sure the power is plugged in at the computer and a working all socket. Make sure that the Box on the power cord is connected properly. Make sure that the connections to the computer and secure and that the computer is turned on. If none of these things fix the monitor, I recommend returning it and getting it replace.
I hope this has helped! Thumbs up are much appreciated.

May 07, 2011 | ASUS LS246H Monitor

Not finding what you are looking for?
2006 Harley Davidson FXDBI Street Bob Logo

110 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4727 Answers

Mike

Level 3 Expert

4348 Answers

yadayada
yadayada

Level 3 Expert

78257 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...