Question about 1980 Suzuki Gs 550 L

1 Answer

Gas in the motor - 1980 Suzuki Gs 550 L

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

Sounds like you have a sticking float in your carb that is letting the fuel leak through the carb and into your motor. You need to remove the carb and clean and check float and drain the oil and replace with new.

Posted on Mar 23, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Chevy colorado gas odometer


gauge is worn out. its the little motor behind the gauge needs replaced its called a stepper motor.. can be found on ebay motors.

Apr 20, 2014 | 2007 Chevrolet Colorado (Extended Cab) New...

1 Answer

Not getting gas in the motor it is going all the way up


Try changing the fuel filter (in line fuel filter).

Dec 15, 2013 | Heating & Cooling

1 Answer

Alfa romeo 156 2.5 v6 ran out of gas now it will not start


When you run out of gas, you sometimes ruin
the fuel pump,it needs fuel to lube it
Check fuel pressure at motor or have a repair
shop look at the pump motor with an oscilloscope,
to see if the motor is ruined or won't pump gas
You could also have other issues & the fuel pump &
gas issue is just a coinidence
Check for codes

Jul 26, 2013 | Cars & Trucks

1 Answer

My heil n9mp2 isnt working just hums


is the flame igniting and then cutting off? on a gas furnace, the induction fan motor(draft motor) should start first (if the furnace is so equipped), then the flame, then the blower. if you have an induction motor (flue gas exhaust mmotor) this may be your problem (the induction motor isn't starting), if your unit doesn't have one, have you checked to see that you have gas? finally, the capacitor on the blower motor may be causing the motor not to start.

Jan 06, 2013 | Heating & Cooling

1 Answer

Why does it idle fine and then when you give it gas it boggs down


A two-stroke engine idles because a very small hole behind the throttle plate lets a tiny amount of gas through to keep the engine running. At full throttle the air moving through the carburator pulls gas through the venturi vaporizing it. With the motor at idle, if you give the motor full throttle very fast the first charge or two that get into the cylinder are almost completely fresh air with vary little or no gas mixed in. It takes a revolution or two for the motor to pull air through the carburator fast enough to get a fully charged mixture of gas and air into the cylinder so you get full power. This effect is especially pronounced when the motor is cold, the gas doesn't vaporize as well when the motor parts are cold. If you give it throttle slowly or let it warm up the effect should go away.

Feb 22, 2012 | Poulan Pro PPBP300 30cc 2Stroke Gas...

1 Answer

How much gas to oil ratio to run generator or straight gas


Hi,
Check for a crankcase with oil in it on the motor...if you have oil in the motor already then you do not need to mix it in the gas...
I am very sure that you will find this motor does not need the gas mixed...
Run straight gas... usually it is good to run Prem in small motors..

heatman101

May 21, 2011 | Sunpentown 2,800 Watt 6.5HP Power...

1 Answer

CAN YOU TELL ME WHAT THIS ERROR CODE MEANS P8


P8- Abnormal temp of out door. If new unit, check gas pressure, may be over charged. Release some gas. If existing a/c, check condenser coil- dusty- clean it. Check f.motor- less rpm-replace capacitor. F.motor mechanism locked- replace motor. If above all o.k., non-condensate gas inside. Release all gas, flush out, replace filter drier and vacuum. And do gas charging. Thanks, helpful.

Jan 31, 2011 | Carrier 38CKC018 Air Conditioner

2 Answers

How to install a new blower motor in a Goodman gas


remove the blower unit it slides out on some gas furnaces you may have a control bord in the way if you dont have a goodman motor you will need a belly band to clamp to new motor to provide the mounting arms also after loosening the shaft set screw spray w wd40 turn on side and shake motor should fall out if gas furn 115v motor hope this helps

Jun 09, 2009 | Heating & Cooling

2 Answers

No heat blower motor no working


Okay, I think we need to back up a bit here. I need to know, first, if the dryer ignites. This is a GAS dryer, correct? I need to know if the igniter is glowing, and if you can hear the gas start flowing when you have ignition. If not, this could be a simple igniter or gas coil problem. If there is ignition and the drum is turning, do you have air flow coming out of the dryer vent exhaust? If there is air flow, you cannot possibly have a blower wheel problem. We need to rule out some possibilities before we start disassembling the dryer. I'm a bit miffed as to why someone would tell you that the motor was the problem. Since I was not there, I need to know as many symptoms that you can provide, so I can give you with a correct assessment.

Jun 15, 2008 | GE DPGT750GC Gas Dryer

Not finding what you are looking for?
1980 Suzuki Gs 550 L Logo

Related Topics:

98 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

Richard
Richard

Level 2 Expert

83 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...