Question about 2010 Peugeot Elystar 50 Advantage

1 Answer

NOT TICKING OVER

MINE IS A SPEEDFIGHT 2 100CC 58 (2009) PLATE..IT TICKS OVER IF I REV IT BUT SOUNDS LIKE ITS MISSING. WHEN I LET THE THROTTLE GO ABOUT 2-5 SECONDS LATER IT CUTS OUT AND WILL NOT START UNTILL I GIVE IT THROTTLE. PLEASE HELP. I DON`T HAVE MUCH MONEY LOL

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Check the exhaust if its the original, renowned for getting carboned up. This will make it falter as you described, I had one that would actually pull, but 3 hundreds yards down the road conked out, exhaust was blocked. Best fix is to take it off and go to your nearest garage and get them to blow it through with an airline.
If its water cooled then may be the head, clear the exhaust first and then remove the head, seals are large o'rings but there should be at least 2mm of metal between seal groove and cylinder area. If not get a secondhand one and but new aluminium bolts, Use a gasket sealant also, just ot be sure.

Posted on Apr 07, 2014

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 3799 Answers

SOURCE: Please help with my Peugeot speedfight 2 50cc ac

Get it De-Coked. When a 2 stroke runs, it burns the oil and this causes a build up of tar and carbon in the exhaust and around the inside of the combustion chamber. This leads to a decrease in performance especially after the use of a learner. This would also give the white smoke and spluttering. Take it to a bike shop or buy a manual and try it yourself. It is a simple job. Good luck.

Posted on Mar 08, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Pulsing idle


Could be the Throttle Position Sensor. Just changed mine and it now idles properly. Mine would occasionally surge when at idle. Mine would also rev around 1500 to 1800 at startup and take a very long time coming down to normal idle. Changing the TPS has solved all my idle problems.

Jun 05, 2014 | 2005 Land Rover Freelander

1 Answer

Wont rev, ticks over fine


Sounds like a broken cable to the throttle body.

Check that both cables are intact.

Apr 16, 2014 | 2004 BMW R 1200 GS

1 Answer

Let 1986 chevy nova get low on oil and now it ticks


It wasn't the oil level. Mine started ticking around 14K and it still ticks like crazy at 168K when the engine is warmed up and cruising. Goes away under moderate acceleration.

There is a thermostatic flapper valve in the exhaust manifold that is likely the source of the ticking when the engine is warm.

Oct 19, 2013 | 1986 Chevrolet Nova

1 Answer

1998 ford mustang knocking noise, ticking sound, idling


forget the boyfriend and take it to an accredited service center for a proper diagnosis and quote
knocks are big ends or mains , and ticks are hydraulic followers
all could be a bad cam but a proper diagnosis will make sure

May 06, 2017 | 1998 Ford Mustang

1 Answer

My Featherweight 221 is ticking, ticking, ticking. It ticks with/or without the bobbin, needle or needle plate. What can I do? Kathy


Remove the bobbin case, put a drop of "sewing machine oil" into the area between where the outer shuttle is turning and the inner shuttle (the part that has the pin sticking out that the bobbin case fits onto.) Also check to see if there is a thread jam in that area. Do not remove or loosen any screws.

Feb 09, 2010 | Singer Featherweight II 117

1 Answer

ITS LOUD TICK WHEN YOU REV THE ENGINE UP TO 2500 RPMS THE TICKS GOES AWAY


low oil pressure is causing your ticking. oil pump pick-up screen may be clogged

Nov 27, 2009 | 1995 Isuzu Rodeo

1 Answer

1988 ford f350 diesel stalls when u let throttle off instead of ticking over if u let throttle off slowly it ticks over if u let throttle off quickly it cuts out


It sounds like your throttle position sensor TPS might be out or faulty. Check your throttle and idle sensors and se if one is bad.

Nov 27, 2009 | 2008 Ford F-350

1 Answer

We know honda has the famous ticking noise from the engine but mine ticks louder. i dont thinking thats the timing chain. ant suggestion?


If it isn't the cam chain then it is most likely a ticking valve tappet. Have the valves adjusted and inspect the cam lobes for damage or scuffing.

Nov 14, 2009 | 2004 Honda CBR 1000 RR Fireblade

1 Answer

PROBLEMS!!!!


That sounds to me like the catalytic converter is going out. suggestion, take it to a muffler shop and have them check it out. As for the ticking and missfiring, mine has done the same thing for a while and I keep throwing out a vacuum leak as well as Throttle position control, cruise won't work as cruise, it will actually slow down on hills from 70-40 mph, but I know both are the problem, solution, the throttle position control is under the air intake, take the air box off of the throttle body and replace it after having autozone run a check. From there..... find someone good at mufflers as well as vacuum leaks and fix it. lol.

Jun 16, 2008 | 2003 Jeep Grand Cherokee

Not finding what you are looking for?

Open Questions:

See all 2010 Peugeot Elystar 50 Advantage Questions

2010 Peugeot Elystar 50 Advantage Logo

141 people viewed this question

Ask a Question

Usually answered in minutes!

Top Peugeot Experts

Joseph Hoffmann

Level 3 Expert

1702 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

adam bikedoc

Level 3 Expert

661 Answers

Are you a Peugeot Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...