Question about Yamaha V Star 1100 Silverado Motorcycles
I cannot find my book for this bike and need to find the fuse box. Does anyone know where it is located on the 2008 Silverado model? I keep find other years models etc and mine isn't located in those places. Any help would be appreciated, Thank you, Susie
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
when a bike has been sitting for a while it can caus a lot ov littel problems the ring gear in ya starter can jam up just from sitting and it wont be abel to turn your bike over if yout put your bike in gear and hold ya clutch in rock ya bike back and foward and let the clutch go when your rocking it back and foward thats all i can think ov going by the info you gave me.
Posted on Feb 27, 2009
The first thing you need to check is the air filter. Sometimes critters can get into the airbox when a bike sits for awhile. Sounds crazy, but it has happened to me. If nothing is blocking the filter, give it a quick clean since you have it out.
Next things to check:
Improperly adjusted fuel level
Clogged or loose main jet
Faulty fuel pump
You may not be able to check these on your own, but these are the next likely culprits.
Hope this helped
Posted on Mar 11, 2009
sounds more like a fuel problem to me. is it cold there did you use stabilizer in the gas? try some berrymans B12 in the gas it cleans everything up internally. it worked for me
Posted on Mar 21, 2009
On the right side of the bike (right side when ou are sitting on it) just above the rear brake lever behind a small circular plate. remove the plate and the oil filter is inside (you will easily see it). Warning---on these bikes you have to drop the front exhaust header and right floor board in order to change the oil filter unless you install a after market oil filter relocation kit. If you plan on changing your own oil it is highly recommended to install this relocation kit.
Posted on May 15, 2009
It's not adjustable. If you need more damping you can change the fork oil to a heavier weight. Put 15w instead of 10w for example. You could also put stiffer springs inside your forks. Rather large job. You could also put a spacer either on top or under the springs you have to get the effect of stiffer springs without actually changing it. Also a large job, but less expensive than new springs. Finally, check your fork seals. If the seals are bad you should see oil leaking from them and that would cause loss of damping.
Posted on May 31, 2009
Tips for a great answer:
Feb 28, 2015 | 2008 Toyota Yaris 1.5
Apr 28, 2014 | Motorcycles
Dec 17, 2013 | Motorcycles
Nov 12, 2013 | Fiat Stilo Cars & Trucks
Jul 29, 2011 | 2008 Pontiac G6 Sedan
Jun 08, 2010 | 2008 Chevrolet Silverado 1500 2WD
Aug 05, 2009 | 2005 Pontiac Vibe
155 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: