Question about 2007 Yamaha XT 660 R

1 Answer

Xt660 multifunction relay problems

Multifunction relay

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Yamaha Master
  • 43,872 Answers

Hi, Anonymous for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
http://www.xt660.com/archive/index.php/f-199.html
Yamaha XT660X Installing led flasher relay
Yamaha XT660R Service Manual
OEM parts for Yamaha
Yamaha XT660R Owner Manual

Posted on Dec 04, 2016

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Today, when I used the combination/multifunction switch in my 2007 Jeep Patriot Limited the blinkers, headlights,and wipers would not turn on. Additionally, the blinkers would not show up on the dashboard...


I would check the wire harness plug for the combination switch where it connects to the vehicle harness under the dash. A bad flasher unit would not affect the by DNSUnlocker"> headlights or thearrow-10x10.png wipers. You can rule that out. More likely is a loose connection.

Oct 17, 2017 | Jeep Cars & Trucks

1 Answer

01 expedition headlights stuck on


Low beam ? high beam ? DRL - daytime running lamps ?
  • The headlamps are on continuously
  • Headlamp switch.
  • Circuitry.
  • Multifunction switch.
  • DRL relay 2 (if equipped).
  • DRL jumper (if equipped).
  • Headlamp relay (if equipped).
  • RAP module (if equipped).
  • Light sensor amplifier (if equipped).
  • GO to Pinpoint Test F .

F1 CHECK THE HIGH BEAM CIRCUIT FOR SHORT TO POWER
Pull CJB Fuse 16 (20A) - central junction box ,inside the vehicle ! Ignition on !
  • Do the headlamps continue to illuminate?
  • Yes GO to F2 .
    No - REINSTALL the fuse.GO to F12 .
  • F2 CHECK CIRCUIT 12 (LG/BK), 160 (DB/WH), AND 161 (DG/OG) FOR SHORT TO POWER
  • pull fuse's CJB Fuse 21 (10A) , CJB Fuse 22 (10A)
  • Do the headlamps continue to illuminate?
  • Yes - REPAIR circuit 12 (LG/BK), 161 (DG/OG), or 160 (DB/WH) as necessary. TEST the system for normal operation.

    No - REINSTALL the fuses. If equipped with daytime running lamps (DRL), GO to F3 .

    If not equipped with DRL, GO to F6 .

  • YOU CAN FIND WIRING DIAGRAM AT
http://www.bbbind.com/free_tsb.html Do you know how to use a wiring diagram ? Videos on youtube .

F3 CHECK CIRCUIT 13 (RD/BK) FOR SHORT TO POWER
do you know how to do this test ?

pull the
DRL Relay 2

  • Do the headlamps continue to illuminate?
Yes REPAIR circuit 13 (RD/BK). TEST the system for normal operation.

No GO to F4 .


  • Do the headlamps continue to illuminate?
Yes REPAIR circuit 13 (RD/BK). TEST the system for normal operation.

No GO to F4 . F4 CHECK THE DRL RELAY 2 Carry out the relay test for the DRL relay 2; refer to Wiring Diagrams, Cell 149, Component Testing.
  • Is the relay OK?
Yes GO to F5 .

No INSTALL a new DRL relay 2. TEST the system for normal operation. F5 CHECK CIRCUIT 1032 (WH/BK) FOR SHORT TO POWER Measure the voltage between DRL relay 2 pin 2, circuit 1032 (WH/BK), harness side, and ground.
  • Is voltage present?
Yes REPAIR the circuit. TEST the system for normal operation.

No GO to F6 . F6 CHECK CIRCUIT 1033 (RD/YE) FOR SHORT TO POWER
Multifunction Switch C259
Measure the voltage between multifunction switch C259 pin 507, circuit 1033 (RD/YE), harness side, and ground.
  • Is voltage present?
Yes If equipped with DRL, REPAIR circuit 1033 (RD/YE). If without DRL, REPAIR circuit 13 (RD/BK), circuit 1033 (RD/YE), or DRL jumper as necessary. TEST the system for normal operation.

No If equipped with autolamps, GO to F7 . If without auto lamps, GO to F11 . F7 CHECK THE HEADLAMP RELAY Carry out the relay test for the headlamp relay; refer to Wiring Diagrams, Cell 149, Component Testing.
  • Is the relay OK?
Yes GO to F8 .

No INSTALL a new headlamp relay. TEST the system for normal operation. F8 CHECK CIRCUIT 7 (LG/YE) FOR SHORT TO POWER
Light Sensor Amplifier C216

Rap Module C257

Park Lamp Relay
Measure the voltage between headlamp relay pin 2, circuit 7 (LG/YE), harness side, and ground.
  • Is voltage present?
Yes REPAIR the circuit. TEST the system for normal operation.

No GO to F9 . F9 CHECK THE HEADLAMPS FOR ILLUMINATION Check the headlamps for illumination.
  • Are the headlamps illuminated?
Yes GO to F10 .

No CHECK the headlamps while reconnecting the RAP module and light sensor amplifier. INSTALL a new RAP module or light sensor amplifier as necessary. TEST the system for normal operation. F10 CHECK CIRCUIT 15 (RD/YE) FOR SHORT TO POWER Measure the voltage between multifunction switch C259 pin 15, circuit 15 (RD/YE), harness side, and ground.
  • Is voltage present?
Yes REPAIR the circuit. TEST the system for normal operation.

No GO to F11 . F11 CHECK THE MULTIFUNCTION SWITCH Carry out the multifunction switch component test; refer to Wiring Diagrams, Cell 149, Component Testing.
  • Is the multifunction switch OK?
Yes INSTALL a new headlamp switch; REFER to Lamp Switch-Headlamp . TEST the system for normal operation.

No INSTALL a new multifunction switch; REFER to Section 211-05 . TEST the system for normal operation. F12 CHECK CIRCUIT 632 (GY/OG) FOR SHORT TO POWER
Multifunction Switch C259
Measure the voltage between multifunction switch C259 pin 12, circuit 632 (GY/OG), harness side, and ground.
  • Is voltage present?
Yes REPAIR the circuit. TEST the system for normal operation.

No INSTALL a new multifunction switch; REFER to Section 211-05 . TEST the system for normal operation.

Jan 21, 2017 | Cars & Trucks

1 Answer

2005 ford escape wiper and washer has no power. cant hear it engage when on but was working a week ago. how can i troubleshoot it and find the fuse


Hi Justin , Do you know what a SJB - smart junction box is and where it is located on you escape ?
Windshield Wiper Operation
The smart junction box (SJB) supplies power to the multifunction switch from the SJB fuse 25 (20A) when the ignition switch is in the ON or ACC position. The multifunction switch supplies power to the windshield wiper motor for the HIGH or LOW/INTERMITTENT input, depending on the multifunction switch position selected. The SJB also supplies power directly to the windshield wiper motor from fuse 25 (20A) when the ignition switch is in the ON or ACC position for RUN/PARK operation. When the multifunction switch is in the LOW, HIGH, or INTERMITTENT position, power is supplied to the windshield wiper motor, which moves the wipers off the park position. Once the wipers are off the park position, an internal switch in the windshield wiper motor switches to the run/park position which directs power to the wiper switch then back to the wiper motor. This maintains power to the windshield wiper motor to complete the wipe cycle. When the cycle is complete, the internal switch in the windshield wiper motor switches back to the park position. If the multifunction switch is in the LOW or HIGH position, power is supplied from the multifunction switch and another wipe cycle starts. If the multifunction switch is in the INTERMITTENT position, the windshield wipers remain parked until the internal relay in the multifunction switch supplies power to the windshield wiper motor. The internal relay supplies power after a time delay that is determined by the 1 of 9 intermittent switch settings.

Jan 08, 2017 | 2005 Ford Escape

1 Answer

No Low beam head lights and no turn signals or hazard lights. Already changed the multi function switch. What to look for next?


When you had the wiring loose for multifunction switch, if possible, knowing what color wire did what, using wiring diagram, I believe you could have used jumper wire to bypass multifunction switch to see if this or that system would work, if it doesn't, the multifunction switch probably wasn't the problem. On older vehicles it was probably easier to do something like that. Could be issue with wiring in steering column or clock spring, where applicable.Your low beam from dimmer switch goes through drl relay, with relay not energized. At the low beam head lamp, tan wire is voltage, black wire is ground.

Jan 25, 2015 | 1998 GMC Sierra

1 Answer

Turn signals and flashers are not working , but it sounds like it is


Either relay or multifunction switch. Start by swapping a relay to see if that fixes it. If so great if not then its going to be the multifunction switch

Aug 15, 2014 | 2004 Ford Focus

3 Answers

My radio, trunk and fuel door all work sometimes. Where is the Multifunction relay? I believe the part# 90494163 It is a 2000 Catera Cadillac. Thanks


K134 Multifunction relay is under the dash on the driver side. When sitting in driver seat, above your left ankle, it is located behind a cardboard panel. Replacing cures many problems with the Bose radio, sunroof, gas and trunk releases, fog lights.

Oct 28, 2010 | 2000 Cadillac Catera

1 Answer

1998 pontiac sunfire


this problem is the multifunction switch in the steering column .there are two different circuits that travel through the multifunction turn signal switch this should be replaced.

Feb 22, 2009 | 1998 Pontiac Sunfire

1 Answer

Electrical System Problems in '02 F250 Diesel


Does the truck have daytime driving lights ? Sounds like a short , maybe the switch inside the steering column . Turn signal , wiper , headlamp dimmer ,or multifuction switch . Without testing this is just a guess . Find a wiring diagram at http://www.bbbind.com/free_tsb.html there free , get yourself a DVOM - digital volt ohm meter an test the B+ volt into an out of the switch . moving dimmer from low to high an turning on the turn signals etc.... Suggest you watch a few videos on youtube for automotive electrical testing , how to use a wiring diagram etc.... disconnect circuits at the mutifunction switch .

Measure the resistance between multifunction switch C202a pin 44, circuit 44 (LB), harness side, and electronic flasher connector pin 1, circuit 44 (LB), harness side; and between multifunction switch C202a pin 44, circuit 44 (LB), harness side, and ground.
  • Is the resistance less than 5 ohms between the multifunction switch and the electronic flasher, and greater than 10,000 ohms between the multifunction switch and ground?

Carry out the multifunction switch component test; Refer to Wiring Diagrams Cell 149 for schematic and connector information.
.

  • Is the multifunction switch OK?
Yes INSTALL a new electronic flasher. TEST the system for normal operation.

No INSTALL a new multifunction switch; REFER to Section 211-05 . TEST the system for normal operation.
Testing the electrical circuits of all the system not functioning properly is how you go about finding the problem .

  1. Visually inspect the following for obvious signs of mechanical and electrical damage.

    Visual Inspection Chart Mechanical Electrical
    • Headlamp switch
    • Multifunction switch
    • Battery junction box (BJB) fuse 3 (30A)
    • Central junction box (CJB) fuse:
      • 5 (15A)
      • 16 (20A)
      • 26 (10A)
      • 28 (10A)
    • Wiring harness
    • Loose or corroded connections
    • Headlamp relay (if equipped)
    • DRL relay No. 2 (if equipped)
    • DRL jumper (if equipped)
    • RAP module (if equipped)
    • Central security module (if equipped)
    • Light sensor amplifier (if equipped)
    • Headlamp bulb
  1. If the concern is not visually evident, determine the symptom and proceed to the Symptom Chart.

Symptom Chart
NOTE: Refer to the Wiring Diagrams for connector numbers stated in the pinpoint test.
Symptom Chart Condition Possible Sources Action
  • Both headlamps are inoperative
  • Battery junction box (BJB) fuse 3 (30A).
  • Headlamp switch.
  • Circuitry.
  • Multifunction switch.
  • GO to Pinpoint Test A .
  • The low beams are inoperative
  • Central junction box (CJB).
  • Circuitry.
  • GO to Pinpoint Test B .
  • The high beams are inoperative
  • CJB fuse 16 (20A).
  • Circuitry.
  • CJB.
  • Multifunction switch.
  • GO to Pinpoint Test C .
  • One low beam headlamp is inoperative
  • CJB fuses:
    • 28 (10A) (LH).
    • 26 (10A) (RH).
  • Headlamp bulb.
  • Circuitry.
  • GO to Pinpoint Test D .
  • One high beam headlamp is inoperative
  • Headlamp bulb.
  • Circuitry.
  • GO to Pinpoint Test E .
  • The headlamps are on continuously
  • Headlamp switch.
  • Circuitry.
  • Multifunction switch.
  • Daytime running lamp (DRL) relay No. 2 (if equipped).
  • DRL jumper (if equipped).
  • Headlamp relay (if equipped).
  • Remote anti-theft personality (RAP) module (if equipped).
  • Central security module (if equipped)
  • Light sensor amplifier (if equipped).
  • GO to Pinpoint Test F .
  • The high and low beam headlamp is inoperative on one side
  • Circuitry.
  • REPAIR circuit 57 (BK). TEST the system for normal operation.
  • The flash-to-pass feature is inoperative
  • Multifunction switch.
  • CHECK circuit 196 (DB/OG) for an open. REPAIR if necessary. If OK, INSTALL a new multifunction switch; REFER to Section 211-05 . TEST the system for normal operation.

Mar 07, 2017 | 2002 Ford F250 Super Duty SuperCab

Not finding what you are looking for?
2007 Yamaha XT 660 R Logo

Related Topics:

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

dhnguyen

Level 2 Expert

281 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1147 Answers

Tony

Level 3 Expert

2600 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...