When I turn ignition key on indicator lights come on but no headlight and when I push start button nothing happens I hear no click from relay. Where and how should I start trouble shooting this problem?
Hi there are the battery terminals clean if not clean them to give a good connection ,then check your starter solleniod connections and clean them ,this should do it but if not spray some crc onto the other connections if this has been sitting for a while this could be your problem . check the fuses as well and spray them ,i hope this helps you out cheers pete
302 views
Usually answered in minutes!
I replaced battery but still same issue. Fuses are good.
Problem is the start button. For some reason the internal plastics of the switch melted and caused the contacts to shift
Add a CommentI
I was able to disassemble switch and repair. Will probably need to replace the switch at some point.Bike starts up normal now.
×