SOURCE: kick start thinggy on the engine as rounded off
Usually a Honda part will fit those pit bikes. Honda 50-150 cc should fit. Take a file and clean up what you can of the splines on the shaft going into the engine. Fully remove the bolt and nut before removing the kickstarter as the bolt is in a groove to help retain the lever. Refit the new lever and tighten down well......Good luck to you...Tim
SOURCE: hi need to know timing settings for 110cc engine
put magneto on <T>top,take off head and place piston till flush with head,place top end back onput timming chain back on and cog with dot facing right between the two markers nw the valves r shut,happy treking
160 views
Usually answered in minutes!
×